Expansion and movement joint sealing in Lanark, South Lanarkshire
Work needed on a movement joint in Lanark? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Chipped joint edges on forklift routes
- Rain penetration at brick or block movement joints
- Previous reseals laid over old sealant
Expansion joint sealing for businesses in Lanark
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Questions about Lanark
Can you work on a hospital site such as Lockhart Hospital?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Lanark off your patch?
No. Small places get the same service as large ones. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Do you reseal car park expansion joints?
Yes. Tell us how the car park is used and which areas must stay open, and we’ll plan the phasing around it.
How we handle expansion joint sealing in Lanark
Internal floor joints take trolleys, pallet trucks and forklifts. Without a sound filler, joint edges chip and spall under load. We will tell you if the edges need repairing before sealing. We work on brickwork movement joints, car park decks and ramps and precast concrete panel joints, and the failures we’re asked to look at most are movement joints with split or torn sealant and damp inside where a wall movement joint has failed. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Lanark is the same: the right product in a properly prepared joint.
Travel to smaller places like Lanark is planned so the work is done in one trip where possible. Send photographs, joint widths and details of the traffic first.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Lanark (ML11)
- Region
- South Lanarkshire
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Also in Lanark
Surface by surface
Cladding panel joints
Cladding panels move more than masonry as they heat and cool. A sealant with the right movement class is chosen, and we’ll confirm the colours available for the specified product.
Joints between different materials
Different materials meeting at a joint rarely move in step. The product must bond to both substrates and cope with the movement priming where the maker calls for it.
Diagnose, treat, sign off
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, and the work usually takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. Where we can, we combine work around Lanark with other jobs nearby. Tell us how flexible your dates are.
- We look at the joints, their width and how they’ve failed.
- Next, we fix a price and confirm the sealant we propose for the movement.
- We strip out the old seal and prepare the faces.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Getting the site ready
- Warn occupants and staff about the work
- Make sure the joints can be reached
- Tell us which areas need to stay in use
Ask for a quote
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, ring 01277 525 020 or send photos by email.
Read more
Common problems we fix in Lanark
When the movement exceeds the sealant’s capability, the bead tears. Cohesive failure, a split through the centre, typically means the joint or product wasn’t right for the movement. The same product in the same joint tends to fail again unless width and product are reviewed.
Any of the following is a good reason to get the joints checked over:
- Torn sealant in brick or block movement joints
- Spalled or broken joint edges in floors and decks
- Layers of sealant in a movement joint
- Water getting into the wall through a failed joint
Schools such as Lanark Grammar School have movement joints in their walls and floors that are easy to overlook.
Questions to ask before you book
- Which product they’ll use, and why it suits the joint
- How the existing material will be dealt with
- Who will actually carry out the work
- Do they follow the manufacturer’s priming guidance?
When it isn’t the sealant
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Proprietary pre-formed expansion joint systems
- A joint that has to be widened or re-detailed before it can work
If you’re not sure, just ring 01277 525 020 or send photos by email and we’ll give you a straight answer.
Joints and surfaces we work on
- Precast concrete panel joints
- Car park decks and ramps
- Blockwork control joints
- Brickwork movement joints
- Cladding panel joints
- Podiums and floor movement joints
Why deal with it now?
Leaving a failed movement joint rarely stays a small problem. Water and debris get in, the joint jams and the edges spall. Acting at the first split keeps the cost down. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Lanark, a repair visit takes planning, so it’s better to act early.
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why appoint us
- Constructionline member for supplier checks
- A fixed quote before work starts
- Over 20 years of commercial sealing
- A range of standard colours, depending on the product
Read what affects the cost or our accreditations and insurance.
Joints that move: notes for Lanark
Lanark is in the east of Scotland, which is drier than the west. Freezing weather and salt still attack open external joints. Sealing them before winter limits the damage.
At a retail site such as Braidfute Retail Park, under half a mile to the south-east of Lanark, joints in car parks, service yards and sales floors carry cars, cages and trolleys every day. Hospitals like Lockhart Hospital (to the south-east of Lanark) have multi-storey or surface car parks whose joints carry vehicles round the clock.
Lanark is about 9 miles south-east of Wishaw, in South Lanarkshire. We cover commercial sites throughout Lanark, for single jobs and planned programmes alike. We work across 134 places in South Lanarkshire. Glasgow is covered too, around 23 miles from Lanark.
Anyone looking for expansion joint sealing in ML11 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on High Street, Kildare Road and Kildare Place or close by, send details and we’ll quote for movement joints. With the A72 and A73 nearby, Lanark is straightforward for us to reach. Sites close to Lanark are covered too, including New Lanark (1 mile south), Kirkfieldbank (1 mile west), Cleghorn (2 miles north-east), Nemphlar (2 miles west) and Cartland (2 miles north-west). A short drive away, we cover Hamilton (13 miles north-west), Blantyre (15 miles north-west), Larkhall (9 miles north-west), Carluke (5 miles north-west), Strathaven (11 miles west) and Bothwell (15 miles north-west). Lanark ranks among the main centres of South Lanarkshire, with offices, shops, schools and other public and commercial buildings, and we cover them all.
What’s near Lanark
In Lanark, that means premises near Delves Park and Maisies pub, among other places. There’s a railway station in Lanark itself: Lanark station. Well-known places in the area include Royal Burgh of Lanark Museum (less than half a mile west) and Lanark Castle (0.5 miles south-west). For a walk, there’s Lanark Loch and Black Hill.
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.