Expansion Joint Sealing in Kelvedon
Expansion and movement joint sealing in walls, decks and floors in Kelvedon and across Essex. CHAS accredited and fully insured, with a 12-month guarantee.
- Brittle, chalky sealant on external joints
- Previous reseals laid over old sealant
- Movement joints with split or torn sealant
Need expansion joint sealing in Kelvedon?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Kelvedon, done properly
The seal is what lets a movement joint do its job. Once it fails, water, grit and debris get in; the joint jams, its edges take the load and the arrises spall. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. If you’re dealing with previous reseals laid over old sealant and movement joints with split or torn sealant, we can put it right, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Kelvedon, preparation and product choice get the time they need.
Small units near places like Kelvedon are often converted farm buildings with new concrete floors. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- Kelvedon (CO5)
- Wider area
- Essex
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Movement on a scale no sealant is meant to absorb
If you are not sure, just phone 01277 525 020 or email a schedule or drawings and we will give you a straight answer.
Where we work in Kelvedon
- Brickwork movement joints
- Precast concrete panel joints
- Car park decks and ramps
- Cladding panel joints
- Podiums and floor movement joints
- Blockwork control joints
Nearby places to Kelvedon
More services for Kelvedon
Why deal with it now?
Leaving a failed movement joint rarely stays a small problem. Water and debris get in, the joint jams and the edges spall and the job grows to repairs as well as sealing. Resealing early keeps the work to sealant. In a smaller place such as Kelvedon, getting a contractor back for a second visit takes time, so it’s worth dealing with every failing joint at once.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why appoint us
- Our applicators hold CSCS cards
- Colour options checked against the specified product
- Fixed quotes based on photographs, drawings or a visit
- A range of standard colours, depending on the product
See our cost guide and our accreditations.
For managing agents and facilities managers
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
Questions we’re asked in Kelvedon
Will our site in Kelvedon have to close for joint sealing?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Does your area include sites such as Gold Key Industrial Estate, near Kelvedon?
Yes. Our area takes in Kelvedon and its surroundings, with estates and business parks such as Gold Key Industrial Estate included. Photos and a short description are enough for a first look.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Do you use silicone or polyurethane in movement joints?
The specification comes first, then the joint’s movement and exposure. We name the proposed product in the quote so there are no surprises.
What causes movement joint sealant to fail?
Most often the movement is too much for the product or the joint width. We review the joint design as well as the sealant before pricing.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Where floor joints take the most wear near Kelvedon
At about 41 miles from central London, Kelvedon is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds. The 3 miles around Kelvedon take in two named trading estates, business parks or retail parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Schools like Kelvedon St Mary's Church of England Primary Academy often have long brick elevations with movement joints that age quietly. Phasing is what makes joint work possible on busy sites such as Threshelfords Business Park (0.8 miles east of Kelvedon): one bay, aisle or car park row at a time.
Kelvedon is about 4 miles north-east of Witham, in Essex. Our applicators travel to Kelvedon for work on movement joints, handled exactly as we handle every other area. Our Essex coverage takes in 644 places. London is covered too, around 41 miles from Kelvedon.
Work on movement joints is covered throughout CO5. If your site is on High Street, Church Road and Station Road or close by, we can quote for movement joints. Close to Kelvedon, our area also takes in Feering (1 mile north-east), Stocks Green (2 miles north-east), Windmill Hill (2 miles south-east), Messing (2 miles east) and Skye Green (2 miles north). A short drive away, we cover Colchester (9 miles north-east), Chelmsford (11 miles south-west), Braintree (7 miles north-west), Maldon (8 miles south), Witham (4 miles south-west) and Camulodunum (8 miles north-east).
Landmarks near Kelvedon
Around Kelvedon, our work takes us to commercial buildings near The George Inn, Parish Church of All Saints and Thurstable School Sports College and Sixth Form Centre, among other places. Kelvedon has its own railway station: Kelvedon station. Nearby you will also find Laundry & Mangle Museum (2.6 miles north-west). Not far away are Tiptree Heath Nature Reserve.
How a job runs
Occupied buildings need a little choreography. We sign and contain the area we’re in, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For a site in Kelvedon, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, flagging any broken edges that need repair before sealing.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Finished joints are checked and backed by our 12-month guarantee.
Preparing the site
- Arrange parking or a loading space
- Point out any areas we must not close
- Have the specification and drawings to hand
Request a quote
For a fixed quote, call 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.
Related advice
Cost factors for movement joints
A fixed quote reflects the actual work. It allows for:
- The site’s rules and procedures
- Specialist products, such as fire-rated or hygienic sealants
- Working within restricted access windows
- The size and state of each joint
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Before you send an enquiry
To price the job accurately, we need to understand the site. Send us:
- Access details, including height
- The postcode of the building
- Clear photographs of the problem areas
- Any specification or named product
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Do you need expansion joint sealing in Kelvedon?
When a bead pulls away from one face, it has lost adhesion. Dusty, damp or contaminated faces, a missing primer and three-sided adhesion are the usual causes, and it’s common on joints sealed in a hurry.
Typical triggers for a call:
- Previous reseals laid over old sealant
- Water dripping through deck or ramp joints
- Expansion joints filled with dirt and stones
- Brittle, chalky sealant on external joints
On industrial estates such as Gold Key Industrial Estate (under half a mile north-east of Kelvedon), saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Comparing quotes
- Do they follow the manufacturer’s priming guidance?
- How joint depth will be controlled
- Proof of insurance
- Will RAMS and insurance details be available?