Expansion Joint Sealing in Inverallochy
Expansion and movement joint sealing in walls, decks and floors in Inverallochy. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Brittle, chalky sealant on external joints
- Movement joints with split or torn sealant
- Chipped joint edges on forklift routes
Expansion joint sealing in Inverallochy
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in Inverallochy, done properly
Long runs of brick or block have movement joints built in. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal comes out, backing goes in and a sealant with the right movement class is applied with primer where the maker calls for it. Site teams most often ask us about weathered movement joint sealant that no longer flexes and expansion joints split through the centre of the bead, on podiums and floor movement joints, car park decks and ramps and cladding panel joints. Searching for sealant specialists in Inverallochy? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
For outside joints near Inverallochy, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range. Internal floors can be done whenever suits the site.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Location
- Inverallochy (AB43)
- Region
- Aberdeenshire
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Different surfaces, different methods
Podium joints
Podium decks are exposed and often trafficked. A sealant suited to both traffic and exposure is used.
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. The product must bond to both substrates and cope with the movement.
More services for Inverallochy
Our process
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Tell us who will meet us and how to get in at your building near Inverallochy. We’ll confirm the plan with the fixed quote.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Each joint is inspected and handed over with our 12-month guarantee.
Getting the site ready
- Have the specification and drawings to hand
- Let building users know which areas are affected
- Explain the parking and delivery arrangements
Ask for a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, give us a call on 01277 525 020 or email us.
Advice
When it isn’t the sealant
Being straight saves everyone time. Fresh joints won’t solve:
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Movement on a scale no sealant is meant to absorb
- A joint that has to be widened or re-detailed before it can work
Not sure which it is? You can speak to us on 01277 525 020 or send photos by email and we will tell you honestly before you book.
Surfaces we seal
- Blockwork control joints
- Cladding panel joints
- Car park decks and ramps
- Precast concrete panel joints
- Podiums and floor movement joints
- Brickwork movement joints
FAQs: Inverallochy
Is Inverallochy off your patch?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Good photos up front let us bring everything on the first visit.
Do you take on work at healthcare sites like Fraserburgh Hospital?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you guarantee expansion joint work?
It’s backed by our 12-month guarantee. Tell us straight away if a joint we sealed gives trouble in that time.
Which sealant will you use?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
How much does the work cost?
Every job gets its own fixed quote. To get one, call the office on 01277 525 020 or email us.
Keeping the joints sound
Regular inspection catches problems early. In particular:
- Inspect exposed joints once the cold weather has passed
- Keep stones and debris out of open joint lines
- Keep traffic off new joints until the cure time is up
- Note which joints were done, when, and with what
Movement joints belong on the planned maintenance inspection list. Early splits and edges starting to lift show up on a routine check, when they’re still cheap to deal with. Should you spot a problem, you can give us a call on 01277 525 020 or email us and send a picture.
Joints sealed at the same time generally fail around the same time. Inspecting the whole run is worth the effort so you can prioritise and budget. We can suggest an order, worst joints first.
Expansion joint sealing in Inverallochy: the local picture
Inverallochy lies within about 1 mile of the sea. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so a failed joint lets more in and the edges break up sooner. Being in the east of Scotland, Inverallochy gets less rain than the west coast. Cold winters and gritting are hard on any yard or deck joint left open. Sealing them in drier months limits winter damage.
Sites like Fraserburgh Hospital (to the west of Inverallochy) carry ambulances, deliveries and visitors’ cars over their road and deck joints. On industrial estates such as Kessock Road Industrial Estate, 2.6 miles to the west of Inverallochy, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Inverallochy is about 3 miles east of Fraserburgh, in Aberdeenshire. Businesses, contractors and managing agents in Inverallochy use us for work on movement joints, as part of our coverage of Aberdeenshire. Our Aberdeenshire coverage takes in 179 places, large and small. There’s a separate page for Aberdeen, about 37 miles away.
We take on movement joints across the AB43 postcode area, for business premises of every kind. We cover commercial and managed buildings on Station Road, Main Street and Summerfield Terrace and the roads nearby. With the B9107 nearby, Inverallochy is straightforward for us to reach. If your building is just outside Inverallochy, we cover St Combs (1 mile south-east), Fraserburgh (3 miles west), Broadsea (3 miles north-west), Memsie (5 miles west) and Sandhaven (5 miles west). Further afield, our area takes in Peterhead (13 miles south-east), Roanheads (13 miles south-east), Clerkhill (13 miles south-east), Port Henry (13 miles south-east), Mintlaw (11 miles south) and Boddam (15 miles south).
What’s near Inverallochy
A little further out are Inverallochy Castle (1.3 miles south) and Fraserburgh Hospital (3.3 miles west). Open spaces near Inverallochy include Loch of Strathbeg.
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
How the quote is worked out
Quotes vary with the job. Expect it to depend on:
- How much there is to seal
- Specialist products, such as fire-rated or hygienic sealants
- The size and state of each joint
- Distance, for remote addresses
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Details that help us quote
We can often quote from photographs and a few details. Please tell us:
- Whether the building will be occupied during the work
- Asbestos survey details if the building is older
- Drawings or a marked-up plan, if available
- When you need the work done
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.