Expansion Joint Sealing in Humbie
Need expansion joint sealing in Humbie? It’s simple: send details, get a quote, we seal, guaranteed.
- Car park joints leaking onto vehicles below
- Joints packed with grit and debris
- Rain penetration at brick or block movement joints
Expansion joint sealing near Humbie
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our expansion joint sealing in Humbie
We cover the full range of movement joints: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. The product depends on the movement, the weather and anything that runs over it, and we’ll confirm the choice in the quote. If you have leaks through car park deck joints onto the level below and brittle, chalky sealant on external joints, we can put it right, on podiums and floor movement joints, car park decks and ramps and cladding panel joints alike. One point of contact handles commercial sealant work in Humbie from the first photographs to the final walk-round, whether it’s one building or several.
Around smaller Scottish places like Humbie, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Location
- Humbie (EH36)
- Wider area
- East Lothian
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Slabs, ramps and loading bays in Humbie
Humbie is on Scotland’s drier eastern side. Frost and de-icing salt still find their way into open external joints. Resealing before the cold months helps protect the edges.
For floors and slabs around Humbie, the product is chosen for the traffic and the movement at each joint. A joint near Humbie that has lost its sealant lets in water and grit, and the edges suffer next.
Humbie is about 8 miles south-west of Haddington, in East Lothian. Commercial clients in Humbie use us for work on movement joints. We work across 48 places in East Lothian, from busy centres to rural villages. Our Edinburgh page has more on work in that area.
Business premises anywhere in EH36 are within our area for movement joints. Among the streets we cover are Shillinghill and Kippithill. Nearby places we also cover include East Saltoun (3 miles north), Wester Pencaitland (4 miles north), Easter Pencaitland (4 miles north), Pencaitland (4 miles north) and Pathhead (4 miles west). Further afield, our area takes in Musselburgh (10 miles north-west), Haddington (8 miles north-east), Tranent (7 miles north-west), North Berwick (15 miles north), Prestonpans (8 miles north-west) and Cockenzie and Port Seton (9 miles north-west).
Local landmarks in Humbie
Well-known places in the area include East Saltoun Old Castle (3.4 miles north). Not far away are Soutra Hill.
Also near Humbie
What else we do in Humbie
General trades versus a specialist
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Why act early in Humbie
Closing a car park for a reseal is rarely an option. Work can be planned so parts of the deck stay open without shutting the whole car park. Tell us what has to stay open and we will plan around it. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
Why choose Mastic Doctor in Humbie
- Over 20 years of commercial sealing
- Fixed quotes based on photos, drawings or a visit
- Work carried out by CSCS-carded applicators
- Colours confirmed for the specified product
Take a look at our cost guide and our accreditations.
How a job runs
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work usually takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. Where we can, we combine work around Humbie with other jobs nearby. Tell us how flexible your dates are.
- First, the joints are inspected for width, movement and the type of failure.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces, and we tell you if any edges need repairing first.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
What we need from you
- Let us know about inductions and permits
- For older buildings, check the asbestos register before work
- Arrange parking or a loading space
Quotes
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. If you have questions first, phone 01277 525 020 or email us.
Related advice
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- Location, for remote and island sites
- Quantities, in metres or numbers
- Removal of failed or old sealant
- How accessible the joints are
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.
Details that help us quote
However big the job, the same details help:
- Specification clauses that apply
- The postcode of the building
- Drawings or a marked-up plan, if available
- How the joints are reached, and at what height
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, ring 01277 525 020 or send details through our quote form.
Common questions from Humbie clients
Do we have to stop operations in Humbie while the joints are sealed?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Which documents can you supply for work in Humbie?
RAMS, insurance certificate, CSCS details: list what the site needs and we’ll confirm it with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
What happens if it rains on the day?
A wet joint can’t be sealed properly, so external work waits for suitable conditions. The work is simply moved to the next suitable day.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
Do you offer coloured sealant?
That depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Different surfaces, different methods
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. We match the product to the traffic and the movement flagging broken arrises before sealing.
Brickwork and blockwork joints
A brick movement joint full of old mortar or debris can’t close. We clear the joint fully before sealing, and tell you if the joint looks too narrow for the movement.
For managing agents and facilities managers
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.