Expansion and movement joint sealing in Hog Hatch, Surrey
Expansion and movement joint sealing in walls, decks and floors in Hog Hatch and across Surrey. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Expansion joints split through the centre of the bead
- Leaks through car park deck joints onto the level below
- Hardened, cracked sealant on exposed facades
Need expansion joint sealing in Hog Hatch?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
From enquiry to sign-off
Site rules come first: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you. For a site in Hog Hatch, we plan so the whole job is done in one go where possible. Clear photographs and measurements help us bring the right products.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
What we need from you
- Share your working hours and any access restrictions
- Have the specification and drawings to hand
- Agree which areas must stay open
Quotes
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
Expansion joint sealing in Hog Hatch, done properly
If you need expansion joint sealing in Hog Hatch, start with photos and joint lengths. We will come and look where photos don’t show enough, then send a fixed quote that names the sealant. You can also speak to us on 01277 525 020 or email us to talk the joints through. If you are dealing with layers of sealant in a movement joint and water getting into the wall through a failed joint, we can put it right, on blockwork control joints, brickwork movement joints and cladding panel joints alike. One point of contact handles commercial sealant work in Hog Hatch from the first photographs to the final walk-round, whether it’s one building or several.
Around places the size of Hog Hatch, joints that need sealing tend to be in rural business units, farm buildings put to commercial use, schools and community buildings. Their slabs and walls still need movement joints that work.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Hog Hatch (GU9)
- Region
- Surrey
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Keeping the joints sound
After handover, these steps help:
- Raise snow-clearing blades over deck joints where possible
- Look over external and deck joints after a hard winter
- Keep racking legs and heavy point loads off floor joints
- Note which joints were done, when, and with what
In warehouses, forklift and pallet-truck routes take the most wear. Avoid standing heavy loads or racking legs on the joints and flag chipped arrises before they spread.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it and it can affect the structure over time. Resealing early limits the damage.
Do you need expansion joint sealing in Hog Hatch?
Three-sided adhesion is a common cause of early failure. Bonded on three faces, it can’t stretch evenly when the joint opens, which is why depth control matters.
Look out for the following:
- Hardened, cracked sealant on exposed facades
- Debris jammed in movement joints
- Leaks through car park deck joints onto the level below
- Torn sealant in brick or block movement joints
Parks like Riverside Business Park, 1.2 miles south-east of Hog Hatch, combine paved areas, car parks and building elevations, each with joints that move.
What to look for in a quote
- What site paperwork they can supply
- Their public liability cover
- What the guarantee covers, and for how long
- Who will actually carry out the work
Building owners, agents and FMs in Hog Hatch
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Hog Hatch can sit alongside others in a wider programme.
Floors, slabs and movement joints in Hog Hatch
At least three named trading, business or retail sites lie within about 3 miles of Hog Hatch. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Hog Hatch lies roughly 36 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day.
University campuses such as University for the Creative Arts (to the south of Hog Hatch) have car parks, paved walkways and building elevations with movement joints. Retail centres such as Farnham Retail Park, 1.4 miles to the south-east of Hog Hatch, have floors, service yards and car parks with joints under constant traffic.
Hog Hatch is about 2 miles north of Farnham, in Surrey. Anywhere in GU9, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Across Surrey, 379 places are covered, Hog Hatch among them. For work in that direction, see our Reading page, about 17 miles away.
We take on movement joints across the GU9 postcode area. Buildings on Coniston Drive, Dukes Walk and Folly Hill are within our area. If your building is just outside Hog Hatch, we cover Ewshot (1 mile north-west), Dora's Green (1 mile west), Warren Corner (1 mile west), Dippenhall (2 miles south-west) and Redlands (2 miles west). Further afield, our area takes in Guildford (10 miles east), Woking (12 miles north-east), Camberley (8 miles north-east), Frimley (7 miles north-east), Haslemere (11 miles south) and Cranleigh (15 miles south-east).
Local landmarks in Hog Hatch
Locally, jobs take us to sites close to Farnham Heath End School and Weybourne LNR and the streets around them. Hog Hatch’s nearest station is Farnham station, roughly 1.5 miles south-east of the centre. A little further out are Hart Shopping Centre (3.7 miles north-west) and Museum of Farnham (1.3 miles south). For a walk, there’s Farnham Park and Aunt's Pool.
Also near Hog Hatch
More services for Hog Hatch
Hog Hatch: questions and answers
Can you work at a site such as Riverside Business Park, by Hog Hatch?
Yes. Estates, retail parks and business parks around Hog Hatch, Riverside Business Park among them, are all within reach. To start, just phone 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Is Hog Hatch too far out for you?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
How long does movement joint sealing take?
It usually takes a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints and phased work can stretch that to suit your site. Cure time before reopening is confirmed on the day.
How do I request a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.
What happens if it rains on the day?
Outside work depends on conditions. Indoor joints can usually carry on regardless.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact.
When something else is needed
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Proprietary pre-formed expansion joint systems
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
Not sure which it is? You can ring 01277 525 020 or use the quote form and we’ll tell you honestly.
Surfaces we seal
- Precast concrete panel joints
- Blockwork control joints
- Podiums and floor movement joints
- Cladding panel joints
- Car park decks and ramps
- Brickwork movement joints
How the job changes by surface
Concrete and precast panel joints
Precast panels often have surface residues that sealant won’t bond to. We prepare the faces thoroughly and prime where the maker calls for it, so the new seal holds.
Joints between different materials
Different materials meeting at a joint rarely move in step. The product must bond to both substrates and cope with the movement.