Expansion joint sealing in Highwood
We carry out expansion and movement joint sealing in walls, decks and floors in Highwood and the surrounding area. Send details for a fixed quote.
- Hardened, cracked sealant on exposed facades
- New sealant over old, now failing
- Joints packed with grit and debris
Expansion joint sealing in Highwood
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle expansion joint sealing in Highwood
Our movement joint work takes in walls, panels, decks and floors: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. The product depends on the movement, the weather and anything that runs over it, and we’ll confirm the choice in the quote. If you have chipped joint edges on forklift routes and damp inside where a wall movement joint has failed, we can put it right, on precast concrete panel joints, podiums and floor movement joints and blockwork control joints alike. Whoever orders the work in Highwood, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Jobs around smaller places like Highwood are planned so the whole job is done in one visit, with the right materials on hand. Note joint widths and the traffic that uses them, and we will take it from there.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- Highwood (BH24)
- Region
- Hampshire
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Why it’s worth doing now in Highwood
Closing a car park for a reseal is rarely an option. Phased work by bay or zone lets the rest stay in use. Tell us what has to stay open and we will plan around it. Halls, stores and units around places like Highwood may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why appoint us
- One number for every site we cover
- Colour options checked against the specified product
- Fixed quotes based on photos, drawings or a visit
- Over 20 years of commercial sealing
When to bring in a specialist
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Places near Highwood
Other services in Highwood
How the quote is worked out
To price the job, we consider:
- How much there is to seal
- Backing rod, priming and other preparation
- Phasing around occupants
- The product specified
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
What we need to price the job
Good information means a firmer quote. Helpful details to send:
- Approximate linear metres or a joint schedule
- Asbestos survey details if the building is older
- The type of building and who uses it
- Clear photos of the problem areas
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, phone 01277 525 020 or use the quote form.
Where floor joints take the most wear near Highwood
The South East is one of the drier parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and gritting in cold spells finds its way into open joints. Less than 3 miles from Highwood there are at least three named estates and business parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Parks like Headlands Business Park (1.3 miles west of Highwood) combine paved areas, car parks and building elevations, each with joints that move. Another example is Carvers Industrial Estate (1.9 miles south-west of Highwood), where floors and yards would be done in stages around the occupiers. In a school such as Poulner Infant School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Highwood is about 2 miles north-east of Ringwood, in Hampshire. Any commercial site in Highwood is covered, for single jobs and planned programmes alike. Highwood is one of 723 places in Hampshire on our list for movement joints. Our Southampton page has more on work in that area (16 miles or so).
If you need expansion joint sealing in BH24, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Close to Highwood, our area also takes in Hangersley (1 mile south), Rockford (1 mile north-west), Shobley (1 mile south-east), Forest Corner (1 mile south-east) and Blashford (1 mile west). Nearby towns on our patch include Totton (12 miles east), Lymington (12 miles south-east), Romsey (15 miles north-east), New Milton (9 miles south-east), Barton on Sea (10 miles south-east) and Dibden Purlieu (15 miles east).
Around Highwood
We work on buildings around Ringwood School Academy and Alice Lisle Inn and the streets around them. Nearby you will also find St Leonard's Hospital (5.5 miles south-west). Not far away are Linbrook Lake and Blashford Lakes.
From enquiry to sign-off
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Jobs in and around smaller places like Highwood are normally planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Before we start on site
- Let us know about inductions and permits
- Agree which areas must stay open
- Warn occupants and staff about the work
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, ring 01277 525 020 or email drawings and photos.
Read more
FAQs: Highwood
Is Highwood too far out for you?
Not at all. Highwood is within our area. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
Can you work at a site such as Headlands Business Park, by Highwood?
Yes, sites like Headlands Business Park are within our area, along with the rest of Highwood. To start, just call 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Can staff carry on working while you’re here?
Typically, yes. We phase the work so most of the building stays in use.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
What sealant do you use in movement joints?
We choose a sealant with a movement capability that suits the joint. Hybrid or MS polymer products suit some mixed-material joints.
Owners, agents and contractors
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Highwood. One quote can cover more than one site, which keeps the paperwork simple.
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Include every elevation and deck joint in periodic inspections
- Inspect exposed joints once the cold weather has passed
- Avoid parking heavy plant or pallets on joint lines
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
Every joint we seal is backed by a 12-month guarantee on workmanship. Keep the handover details, product and date with your O&M records.
A failed deck joint lets water straight through to the level below. Salty water dripping through stains soffits and lands on parked vehicles, which is bad news for the concrete and the people parking below. Resealing early limits the damage.