Hannington expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors across Hannington, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Weathered movement joint sealant that no longer flexes
- Car park joints leaking onto vehicles below
- New sealant over old, now failing
Expansion joint sealing for businesses in Hannington
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Expansion joint sealing in Hannington
Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels. If the arrises are already broken, we will say so before sealing. If you have water dripping through deck or ramp joints and joints where the bead has lost adhesion, we can put it right, on car park decks and ramps, podiums and floor movement joints and blockwork control joints alike. Whether you call it commercial sealant work, mastic application or joint sealing, in Hannington it comes down to the same thing: the right product in a properly prepared joint.
Jobs around smaller places like Hannington are planned so the whole job is done in one visit. Note joint widths and the traffic that uses them, and we will take it from there.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Hannington (RG26)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Do you need expansion joint sealing in Hannington?
Repeated failure often traces back to the wrong product. Products not classed for the movement fail early. BS EN ISO 11600 classifies building sealants by movement capability.
Any of the following is a good reason to get the joints checked over:
- Hardened, cracked sealant on exposed facades
- Arrises breaking up along floor joints
- Expansion joints filled with dirt and stones
- Damp inside where a wall movement joint has failed
A healthcare site such as Park Prewett Hospital (4.8 miles east of Hannington) depends on car parks, ramps and service yards whose joints take traffic all day.
Before you book anyone
- What level of public liability insurance do they hold?
- How they’ll work around occupants
- Is the sealant right for the movement and the substrate?
- Do they follow the manufacturer’s priming guidance?
Cost factors for movement joints
We price every job individually. The things that drive the figure:
- Whether old sealant has to be cut out first
- Phasing around occupants
- Joint width, depth and condition
- Location, for remote and island sites
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Details that help us quote
For an accurate fixed quote, we need a clear picture of the site. Send us:
- How the joints are reached, and at what height
- Whether an asbestos survey exists
- Any dates the work must fit around
- A wide shot and a close-up of the area
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, ring 01277 525 020 or send details through our quote form.
Surface by surface
Car park decks and ramps
Water coming through deck joints is the usual first sign. We strip the old seal, prepare the edges and seal again flagging broken edges along the way.
Cladding panel joints
Cladding panels move more than masonry as they heat and cool. A sealant with the right movement class is chosen in a colour confirmed for that product.
Should maintenance staff do it?
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
How a job runs
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. Smaller jobs around Hannington can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Before we start on site
- Flag any permit to work we will need
- Tell staff and tenants when we will be in
- Move anything stored against the joints
Get a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, speak to us on 01277 525 020 or email drawings and photos.
Related advice
Your questions answered
Is Hannington off your patch?
No. Small places get the same service as large ones. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Will our site in Hannington have to close for joint sealing?
Rarely. Work is phased around your operations. We agree the sequence and timings with you before we start.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Can you seal joints in cold or wet weather?
Outside work depends on conditions because a damp or frozen joint won’t take a proper bond. Internal floor joints are far less affected.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Do you use silicone or polyurethane in movement joints?
Movement capability matters most, classified under BS EN ISO 11600. Hybrid or MS polymer products suit some mixed-material joints.
Joints that move: notes for Hannington
Rainfall across the South East, Hannington included, is lower than in many parts of the UK. External joints still wait for dry conditions, and winter de-icing salt on car parks and ramps works into any open joint. Central London is about 51 miles from Hannington. Warehousing clusters around the motorways that ring and radiate from London, and their floor joints take forklift and pallet-truck traffic all day.
In and around Hannington, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Hannington is about 5 miles south-west of Tadley, in Hampshire. Commercial clients in Hannington use us for work on movement joints, as part of our coverage of Hampshire. 723 places across Hampshire fall within our area, Hannington among them. Reading is covered too, some 15 miles away.
Business premises anywhere in RG26 are within our area. Among the streets we cover are Meadham Lane and Ibworth Lane, and sites on any of them can send details for a fixed quote. We also cover Kingsclere (2 miles north-west), Ibworth (2 miles south-east), Wolverton (2 miles north-east), Townsend (2 miles north-east) and Wolverton Common (3 miles north-east). A short drive away, we cover Basingstoke (6 miles south-east), Andover (13 miles south-west), Alton (15 miles south-east), Tadley (5 miles north-east), Hook (12 miles east) and Popley (6 miles east).
Around Hannington
Locally, jobs take us to sites close to The Vine pub. The nearest railway station is Overton station, about 3.4 miles south-west of the centre. Well-known places in the area include Park Prewett Hospital (4.8 miles east). Open spaces near Hannington include Ladle Hill.
For managing agents and facilities managers
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.