Expansion and movement joint sealing in Ibworth, Hampshire
Expansion joint sealing in Ibworth, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Leaks through car park deck joints onto the level below
- Joints where the bead has lost adhesion
- Spalled or broken joint edges in floors and decks
Expansion joint sealing for Ibworth sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Where floor joints take the most wear near Ibworth
Ibworth is in the South East, one of the UK’s drier regions. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint. Ibworth lies roughly 50 miles out from central London. Warehousing clusters around the motorways that ring and radiate from London.
Hospital campuses such as Park Prewett Hospital (3.1 miles east of Ibworth) grow in stages, leaving movement joints wherever new blocks meet old. For floors and slabs around Ibworth, the product is chosen for the traffic and the movement at each joint.
Ibworth is about 4 miles west of Basingstoke, in Hampshire. We cover commercial sites throughout Ibworth. Across Hampshire, 723 places are covered, Ibworth among them. Our Reading page has more on work in that area, about 15 miles away.
Commercial sites across RG26 and RG23 are covered. We also cover Newfound (2 miles south-east), Oakley (2 miles south), Worting (3 miles south-east), Buckskin (3 miles south-east) and Winklebury (3 miles east). Bigger towns within reach include Basingstoke (4 miles east), Fleet (15 miles east), Andover (14 miles west), Alton (13 miles south-east), Tadley (5 miles north) and Hook (10 miles east).
Around Ibworth
The nearest railway station is Overton station, roughly 3.5 miles south-west. Other landmarks nearby include Park Prewett Hospital (3.1 miles east).
Expansion joint sealing for commercial buildings in Ibworth
Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels so the product has to suit both the traffic and the movement. We will tell you if the edges need repairing before sealing, and phased work keeps areas in use. We work on blockwork control joints, cladding panel joints and precast concrete panel joints, and the failures we are asked to look at most are water dripping through deck or ramp joints and sealant peeling off one face of the joint. A single leaking joint is often how a building in Ibworth first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Smaller community and commercial buildings around Ibworth have their own movement joints in walls and floors. They’re easily forgotten until water gets in or an edge breaks.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Ibworth (RG26, RG23)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Places near Ibworth
What else we do in Ibworth
When to bring in a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Surface by surface
Joints between different materials
Some mixed-material joints suit a hybrid sealant. We pick the product for the materials and the movement, and confirm it in the quote.
Car park decks and ramps
Failed deck joints often show as leaks on the level below. We strip the old seal, prepare the edges and seal again.
What sets the cost
Before we quote, we look at:
- Distance, for remote addresses
- Quantities, in metres or numbers
- Joint width, depth and condition
- Induction, permit and paperwork requirements
Pricing movement joints depends on how many there are, their condition and the access, plus any specification you’re working to. Call for a quote.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- Your programme or deadline
- Rough lengths or quantities, or drawings if you have them
- The type of building and who uses it
- Access details, including height
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call the office on 01277 525 020 or email the details over.
Maintenance after handover
Once the work is signed off, a little attention goes a long way:
- Plan racking layouts so feet don’t land on a joint
- Reopen bays and walkways only after the stated cure time
- Keep product details with the building records for the next reseal
- Report split or peeling joint sealant early
Snow ploughs and scrapers catch on joint lines. Lifting the blade at each joint avoids tearing the bead.
Floor joints with failed fillers break up quickly under wheels. Broken arrises jolt trucks, loads and drivers and the broken length grows with every pass. Sealing early protects the edges.
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Rural sites near Ibworth may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Send your site hours and access windows
- Have the specification and drawings to hand
- For older buildings, check the asbestos register before work
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Read more
Questions about Ibworth
Is a smaller place like Ibworth outside your area?
Not at all. Ibworth is within our area. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Is hospital work, at somewhere like Park Prewett Hospital, something you do?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Do you need to see the site first?
It depends on the job. Simple work can often be priced from photographs, and bigger or more complex jobs typically get a visit.
Do you take on small jobs?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
Can you work to our specification?
Yes. Send it with your enquiry, and we will price the work to it.
What if the joint edges are damaged?
The edges have to be sound. Where they’ve broken up, we will tell you they need repairing first.