Expansion and movement joint sealing in Hampton, Kent
Need expansion joint sealing in Hampton? It’s simple: send details, get a quote, we seal, guaranteed.
- Arrises breaking up along floor joints
- Previous reseals laid over old sealant
- Movement joints with split or torn sealant
Expansion joint sealing in Hampton
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing for commercial buildings in Hampton
Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels. If the arrises are already broken, we will say so before sealing, and phased work keeps areas in use. We work on precast concrete panel joints, car park decks and ramps and brickwork movement joints, and the usual reasons a site gets in touch are leaks through car park deck joints onto the level below and previous reseals laid over old sealant. Most enquiries from Hampton start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In a smaller place such as Hampton, floor and movement joints are often in agricultural and rural business units, schools and the odd small industrial yard. Concrete floors and yards in these buildings move and crack like any others.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Hampton (CT6)
- Region
- Kent
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Different surfaces, different methods
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. The right filler or sealant for the traffic and movement protects them, and tell you if edges need repairing first.
Concrete and precast panel joints
Joints between precast panels open and close with temperature and loading. The sealant needs the right movement capability and a controlled depth.
Places near Hampton
Other services in Hampton
Why deal with it now?
A failed joint seal doesn’t mean the slab, panel or wall needs replacing. Where the edges are sound, cutting out and resealing is enough. We’ll flag where edges need repair before sealing. In a smaller place such as Hampton, getting a contractor back for a second visit takes time, so we’d suggest renewing all the joints that are going, not just the worst.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
Why us?
- Colour options checked against the specified product
- 12-month guarantee on workmanship
- Work to your specification and the manufacturer’s guidance
- Clear, fixed quotes
See our cost guide and how we’re accredited.
Hampton: questions and answers
Can you work on a hospital site such as Queen Victoria Memorial Hospital?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Does your area include sites such as St. Augustine's Business Park, near Hampton?
Yes. We cover Hampton and the area around it, including industrial estates, business parks and retail parks such as St. Augustine's Business Park. Photos and a short description are enough for a first look.
What sealant do you use in movement joints?
It depends on the movement, exposure and traffic. Low-modulus neutral-cure silicone suits many facade joints, while polyurethane is common in trafficked floor and deck joints, and the specification has the final say.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
How long does movement joint sealing take?
It typically takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. We confirm the timescale with the quote, including any phasing.
Do you offer coloured sealant?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Do you work in Hampton?
Yes. We cover Hampton, and the simplest way to start is to call the office on 01277 525 020 or email drawings and photos.
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Joints too narrow for the movement, which need redesigning by the engineer
- Damaged metal nosings or cover plates over a joint
- Concrete or masonry repairs along the arrises
If in doubt, call the office on 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
Surfaces we seal
- Precast concrete panel joints
- Cladding panel joints
- Car park decks and ramps
- Blockwork control joints
- Brickwork movement joints
- Podiums and floor movement joints
General trades versus a specialist
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Traffic, movement and joints around Hampton
Hampton lies within about 1 mile of the sea. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, and edges left open tend to break up faster. Central London is about 52 miles from Hampton. Warehousing clusters around the motorways that ring and radiate from London; their floors carry heavy traffic every shift.
Business parks such as St. Augustine's Business Park, 1.1 miles south-west of Hampton, have car parks, paved areas and long brick and panel elevations, all with movement joints. Sites like Queen Victoria Memorial Hospital, 2 miles to the east of Hampton, carry ambulances, deliveries and visitors’ cars over their road and deck joints. For a school such as Hampton Primary School, playground and building joints can be done in the holidays.
Hampton is about 2 miles west of Herne Bay, in Kent. Our applicators travel to Hampton for work on movement joints. Hampton is one of 931 places we cover in Kent for movement joints. London is covered too, some 52 miles away.
We cover the CT6 postcode districts for movement joints. Streets here include Riley Avenue, Essex Avenue and Alvis Avenue. We also cover Swalecliffe (2 miles south-west), West End (2 miles south), Chestfield (2 miles south-west), Tankerton (2 miles west) and Radfall (3 miles south-west). Bigger towns within reach include Canterbury (6 miles south), Margate (12 miles east), Ramsgate (14 miles east), Broadstairs (14 miles east), Faversham (10 miles south-west) and Minster (13 miles west).
Landmarks near Hampton
Locally, jobs take us to sites close to Hampton Inn and Herne Bay High School. For rail, the closest station is Herne Bay station, roughly 1 mile south-east of the centre. A little further out are Whitstable and Tankerton Hospital (2.2 miles west) and Tankerton Castle (2.8 miles west). The countryside around Hampton includes West Blean and Thornden Woods.
Quoting for work in Hampton
We price every job individually. The main factors are:
- Location, for remote and island sites
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
- Joint width, depth and condition
The price depends on the quantity of joints, what has to come out first and the access. Call for a quote when you are ready.
What to include in your enquiry
A good diagnosis starts with the right details. Tell us:
- Clear photos of the problem areas
- The product your specification calls for
- Drawings or a marked-up plan, if available
- Your programme or deadline
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, call the office on 01277 525 020 or email drawings and photos.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. If neighbouring businesses or buildings around Hampton need work too, visits can be combined. Tell us your site hours and we will plan around them.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Have the specification and drawings to hand
- Share your working hours and any access restrictions
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to ring 01277 525 020 or send details through our quote form with what you know.