Expansion joint sealing in Grays
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Grays and the surrounding area. Send details for a fixed quote.
- Water getting into the wall through a failed joint
- Sealant peeling off one face of the joint
- Leaks through car park deck joints onto the level below
Expansion joint sealing in Grays
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How the job changes by surface
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. We match the product to the traffic and the movement.
Podium joints
Podium joints often sit within a waterproofing system. Where the specification calls for sealant, we reseal and flag it if the membrane looks like the source.
Expansion joint sealing in Grays, done properly
We have been sealing expansion and movement joints for over 20 years for contractors, facilities managers and owners. Our applicators are CSCS-carded, we are CHAS accredited and a Constructionline member, and we carry five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. Most enquiries involve damp inside where a wall movement joint has failed and leaks through car park deck joints onto the level below, across blockwork control joints, brickwork movement joints and podiums and floor movement joints. One point of contact handles commercial sealant work in Grays from the first photographs to the final walk-round, whether it’s one building or several.
Car parks and yards in towns like Grays take tyre loads and, in winter, de-icing salt. Resealing before the edges break up is far less disruptive than repairing them later.
Work we carry out in Thurrock comes with a 12-month guarantee. Should something we installed fail, call the office on 01277 525 020 or email us and we will come back to it.
When to bring in a specialist
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Your questions answered
Do you cover business parks and estates near Grays, such as Thurrock Park Industrial Estate?
Yes. Our area takes in Grays and its surroundings, with estates and business parks such as Thurrock Park Industrial Estate included. Photos and a short description are enough for a first look.
Does the sea air around Grays change the choice of sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We check the specified product suits the exposure and pay close attention to preparation.
Do you work in Grays?
Yes. Sites across Grays are covered, and the same phone number covers every area.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
What exactly is a movement joint?
They’re closely related. Both let materials grow and shrink with temperature, moisture and load while the sealant stops grit and water getting in.
Do the joint edges need to be sound before sealing?
Broken arrises have to be put right before resealing, and we will point out where that’s the case. A bead on a broken edge soon lets go.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Quoting for work in Grays
Quotes vary with the job. It mainly depends on:
- Phasing around occupants
- Joint width, depth and condition
- How accessible the joints are
- Quantities, in metres or numbers
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Details that help us quote
A few photographs plus some basic facts will normally do. It helps to include:
- Your programme or deadline
- Clear photographs of the problem areas
- What the building is and how it’s used
- Approximate linear metres or a joint schedule
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings that you can work with. For a chat about it beforehand, ring 01277 525 020 or email the details over.
Slabs, ramps and loading bays in Grays
Grays sits close to the coast, within about 3 miles. Open joints in coastal car parks and yards let in salt-laden water as well as grit, which is why split joints are worth sealing before the edges deteriorate. Less than 3 miles from Grays there are at least three named estates and business parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
University campuses such as University of Greenwich (to the south-west of Grays) have car parks, paved walkways and building elevations with movement joints. For a centre such as Lakeside Shopping Centre, 2.1 miles to the west of Grays, the service yard and car park joints typically need attention first. Hospital campuses such as Thurrock Community Hospital (1 mile north of Grays) grow in stages, leaving movement joints wherever new blocks meet old.
Grays is about 5 miles north-east of Dartford, in Thurrock. Businesses, contractors and managing agents in Grays use us for work on movement joints, as part of our coverage of Thurrock. 27 places across Thurrock fall within our area, Grays among them. London is covered too, some 18 miles away.
We cover the RM17, RM16, RM20 and RM18 postcode districts. Among the streets we cover are London Road, College Avenue and Cresthill Avenue. You will find Grays on or near the A126 and B149. We also cover Little Thurrock (1 mile north-east), Chafford Hundred (1 mile north-west), Orsett Heath (1 mile north-east), North Stifford (2 miles north-west) and Chadwell St Mary (2 miles east) for movement joints. Bigger towns within reach include Stanford-le-Hope (5 miles north-east), South Ockendon (3 miles north-west), Balstonia (5 miles north-east), Corringham (6 miles north-east), Aveley (4 miles west) and Purfleet-on-Thames (4 miles west).
Around Grays
In Grays, that means premises near Thurrock and Basildon College, Grays Convent High School and The Traitors Gate pub. The closest station to Grays is Grays station, roughly 0.6 miles south-west. Nearby you’ll also find Stone Castle (3.6 miles south-west) and Thurrock Community Hospital (0.9 miles north). For a walk, there’s Chafford Gorges Nature Park and Sawyers Lake.
When something else is needed
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Leaks coming from the membrane rather than the joint seal
- A joint that has to be widened or re-detailed before it can work
- Cracking or settlement that calls for an engineer’s assessment
Not sure which it is? You can call the office on 01277 525 020 or send photos by email and we will tell you honestly before you book.
Surfaces we seal
- Precast concrete panel joints
- Cladding panel joints
- Blockwork control joints
- Brickwork movement joints
- Podiums and floor movement joints
- Car park decks and ramps
What happens if it’s left?
A failed joint seal doesn’t mean the slab, panel or wall needs replacing. If the material either side is sound, a properly prepared reseal restores the joint. We will flag where edges need repair before sealing. In a town such as Grays, a lot of buildings are older and have been altered over time, so joints between old and new are often the first to go. Renewing them before water gets in protects the fabric.
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote when you’re ready.
What you get with us
- CHAS accredited contractor
- Fully insured
- A Constructionline member, so easy to vet
- Colours confirmed for the specified product
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Parking and loading for town-centre jobs in Grays are worth mentioning when you send details. Industrial and business units normally have yard or car park space.
- We start with photos, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability, and flag anything that needs an engineer.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Preparing the site
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we will be in
- Explain the parking and delivery arrangements
Ask for a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, speak to us on 01277 525 020 or send photos by email.