Expansion joint sealing in Glen More
Expansion and movement joint sealing in walls, decks and floors across Glen More, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Chipped joint edges on forklift routes
- Brittle, chalky sealant on external joints
- Joints where the bead has lost adhesion
Expansion joint sealing across Glen More
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Questions we are asked in Glen More
Does a coastal location like Glen More affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Is a smaller place like Glen More outside your area?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work while the building is occupied?
In most cases, yes. Phased work can be planned so areas stay in use.
How long will the joint resealing take?
That depends on joint lengths, widths, access and how much old sealant or filler needs removing. Typically it takes a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints.
Do you use silicone or polyurethane in movement joints?
We choose a sealant with a movement capability that suits the joint, classified under BS EN ISO 11600. Where two different materials meet, a hybrid sealant can be the better choice.
Does the weather affect the work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Is any job too small?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
How we handle expansion joint sealing in Glen More
A movement joint only works while its seal does. Once it fails, water, grit and debris get in; the joint jams, its edges take the load and the arrises spall. Resealing at the first signs of failure is far cheaper than repairing the material either side. We work on car park decks and ramps, precast concrete panel joints and cladding panel joints, and what we’re called in for most is movement joints with split or torn sealant and water getting into the wall through a failed joint. Whether you call it commercial sealant work, mastic application or joint sealing, in Glen More it comes down to the same thing: the right product in a properly prepared joint.
Weather windows decide external joint work around a place like Glen More: dry faces and the right temperature are essential. Internal floors can be done whenever suits the site.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Glen More (IV40)
- Region
- Highland
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Keeping the joints sound
Problems stay small when the joints are checked regularly. In particular:
- Report split or peeling joint sealant early
- Include every elevation and deck joint in periodic inspections
- Raise snow-clearing blades over deck joints where possible
- Note which joints were done, when, and with what
Our workmanship on movement joints carries a 12-month guarantee. Keep the handover details, product and date with your O&M records, so the next reseal starts with the facts.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it. Sealing the joint promptly stops it at source.
What the job involves on each surface
Cladding panel joints
Access to cladding joints is agreed before the price is fixed. Close-up photographs help us judge the joints.
Brickwork and blockwork joints
Vertical movement joints in brick and block walls let the masonry grow and shrink. We use a sealant rated for the movement, usually low-modulus laid over backing rod at the correct depth.
Quoting for work in Glen More
Each job is priced on its own details. The things that drive the figure:
- Site requirements such as inductions and permits
- Which sealant the job calls for
- Phasing around occupants
- Quantities, in metres or numbers
Pricing movement joints depends on quantities, condition and access, plus any specification you are working to. Ask us for a fixed quote.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- Your programme or deadline
- Any specification or named product
- Drawings or a marked-up plan, if available
- Photos of the joints, close up and from further back
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, speak to us on 01277 525 020 or email drawings and photos.
Work for main contractors and building owners
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Floors, slabs and movement joints in Glen More
Glen More is within about 2 miles of the coast. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, and edges left open tend to break up faster. Being in the west of Scotland, Glen More gets more rain than eastern areas. Open joints in external slabs take a lot of water. Dry spells are used for the external joints.
Once a joint near Glen More opens up, grit and water get in and the edges start to break; we will tell you if the edges need repairing first. In and around Glen More, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Glen More is in Highland. We send applicators to Glen More for movement joints, handled exactly as we handle every other area. Across Highland, 256 places are covered, Glen More among them.
We take on movement joints across the IV40 postcode area. Sites close to Glen More are covered too, including Glenelg (1 mile west), Galltair (2 miles west), Auchtertyre (5 miles north), Reraig (5 miles north) and Dornie (5 miles north-east). Where a site is remote or on an island, travel and materials need planning ahead, so include the location in your enquiry.
What’s near Glen More
A little further out are Eilean Donan Castle (4.5 miles north-east). Open spaces near Glen More include Loch an t-Seachrain and Glas Bheinn.
How a job runs
Occupied buildings need a little choreography. We sign and contain the area we’re in, keep walkways clear and move on in phases so staff and visitors can carry on around us. Jobs near Glen More are often grouped with others in the same area. Tell us how flexible your dates are.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take, and flag anything that needs an engineer.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Getting the site ready
- Share your working hours and any access restrictions
- Tell us what induction or permit system the site runs
- Have the specification and drawings to hand
Quotes
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Read more
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.