Expansion Joint Sealing in Gattonside
Planning work on a movement joint in Gattonside? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Water getting into the wall through a failed joint
- Spalled or broken joint edges in floors and decks
- Joints where the bead has lost adhesion
Expansion joint sealing across Gattonside
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When to call us in Gattonside
Some joints were never sealed with the right product. Products not classed for the movement fail early. BS EN ISO 11600 classifies building sealants by movement capability.
Typical triggers for a call:
- Previous reseals laid over old sealant
- Rain penetration at brick or block movement joints
- Joints where the bead has lost adhesion
- Expansion joints split through the centre of the bead
Across sites such as Tweedbank Industrial Estate (1.2 miles west of Gattonside), floor and movement joints can be sealed in phases so units keep working.
Comparing quotes
- Can the work be phased to keep areas open?
- Will RAMS and insurance details be available?
- Will CSCS-carded applicators be on site?
- How joint depth will be controlled
How we handle expansion joint sealing in Gattonside
For movement joints in Gattonside, photographs and approximate lengths are the best start. We will come and look where photos don’t show enough, then send a fixed quote that names the sealant. To discuss the joints first, phone 01277 525 020 or email drawings and photos. We work on precast concrete panel joints, blockwork control joints and car park decks and ramps, and what we are called in for most is expansion joints filled with dirt and stones and new sealant over old, now failing. A single leaking joint is often how a building in Gattonside first comes to us: we look at the rest while we’re there and tell you what we find.
Weather windows decide external joint work around a place like Gattonside: dry faces and the right temperature are essential. Internal floors can be done whenever suits the site.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application, and we come back if anything isn’t right.
- Place
- Gattonside (TD6)
- Region
- Scottish Borders
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Gattonside: questions and answers
Is Gattonside off your patch?
No. Places such as Gattonside are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Can you work on a hospital site such as Borders General Hospital?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Can staff carry on working while you are here?
Typically, yes. We phase the work so most of the building stays in use.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, let us know and we will send them with the quote.
Why has the sealant in our expansion joints split?
Typically the joint is moving more than the sealant can take. That’s why we check width, depth and movement class before quoting, rather than replacing like for like.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
Slabs, ramps and loading bays in Gattonside
The 3 miles around Gattonside take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. Gattonside is in the east of Scotland, which is drier than the west. Frost and de-icing salt still find their way into open external joints. Sealing them before winter limits the damage.
On a site such as Borders Innovation Park (1.2 miles west of Gattonside), the movement joints are in car park slabs, paving and building elevations. For estates staff at a university like Heriot-Watt University - Scottish Borders Campus, 2.2 miles to the west of Gattonside, building and paving joints are part of the planned maintenance list.
Gattonside is about 3 miles east of Galashiels, in the Scottish Borders. We cover commercial sites throughout Gattonside, for single jobs and planned programmes alike. Gattonside is one of 91 places in the Scottish Borders on our list for movement joints. For work in that direction, see our Edinburgh page.
Commercial sites across TD6 are covered for movement joints. Streets here include The Loan, Priors Road and Monkswood. If your building is just outside Gattonside, we cover Melrose (1 mile south), Darnick (1 mile south-west), Newstead (1 mile south-east), Tweedbank (2 miles west) and Langlee (2 miles west). A short drive away, we cover Galashiels (3 miles west), Hawick (13 miles south), Kelso (11 miles east), Selkirk (6 miles south-west), Jedburgh (11 miles south-east) and Wilton (13 miles south).
Around Gattonside
The nearest railway station is Tweedbank station, roughly 1.3 miles west of the centre. Well-known places in the area include Melrose Motor Museum (0.5 miles south-east) and Castle Holydean (3 miles south). Open spaces near Gattonside include Eildon Hill North and Bemersyde Moss.
Also near Gattonside
What else we do in Gattonside
Owners, agents and contractors
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
What affects the price in Gattonside
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Removal of failed or old sealant
- Specialist products, such as fire-rated or hygienic sealants
- How accessible the joints are
- Joint width, depth and condition
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- A wide shot and a close-up of the area
- The type of building and who uses it
- Specification clauses that apply
- Asbestos survey details if the building is older
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to give us a call on 01277 525 020 or send photos by email with what you know.
On site: what to expect
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work normally takes a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints. For a building near Gattonside, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- We assess the joints on site or from photos, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
What we need from you
- Make sure the joints can be reached
- Explain the parking and delivery arrangements
- Tell staff and tenants when we will be in
Quotes
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or call the office on 01277 525 020 or email us if you’d rather talk the job through.
Related advice
Different surfaces, different methods
Cladding panel joints
Metal and composite panels shift considerably as temperatures change. A sealant with the right movement class is chosen in a colour confirmed for that product.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. Trafficked floor joints often get a semi-rigid filler, with a flexible sealant where movement is larger.
Looking after the joints
For the best life from the joints:
- Act on the first tear or lifting edge rather than waiting
- Inspect exposed joints once the cold weather has passed
- Leave barriers in place until fresh joint sealant has cured
- Keep racking legs and heavy point loads off floor joints
Add every elevation, deck and floor joint to your inspection round. Early splits and edges starting to lift show up on a routine check and long before edges start to break. If anything looks wrong, call the office on 01277 525 020 or send photos by email with photos.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster, and the damage spreads along the joint. Sealing early protects the edges.