
Friday Street expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors across Friday Street, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Sealant peeling off one face of the joint
- Leaks through car park deck joints onto the level below
- Previous reseals laid over old sealant
Expansion joint sealing near Friday Street
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Friday Street, done properly
Joints in car park decks and ramps are among the hardest-working in any building. Wheel loads, grit and de-icing salts attack the seal and the concrete either side, so failed seals soon lead to leaks onto the level below and broken edges. A sealant suited to traffic and the expected movement goes in and the work can be phased so parts of the car park stay open. We work on car park decks and ramps, blockwork control joints and brickwork movement joints, and what we are called in for most is damp inside where a wall movement joint has failed and debris jammed in movement joints. One point of contact handles commercial sealant work in Friday Street from the first photos to the final walk-round, whether it’s one building or several.
In and around smaller places like Friday Street, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
A 12-month guarantee applies to all our work in Surrey. Should something we installed fail, call the office on 01277 525 020 or email a schedule or drawings and we will come back to it.

- Location
- Friday Street (RH5)
- Wider area
- Surrey
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Diagnose, treat, sign off
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. Rural sites near Friday Street may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- We assess the joints on site or from photos, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Agree which areas must stay open
- Share the asbestos register for older buildings
- Move anything stored against the joints
Get a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Advice
Questions about Friday Street
Will you take on work at estates like Chapel Lane Industrial Estate, close to Friday Street?
Yes, sites like Chapel Lane Industrial Estate are within our area, along with the rest of Friday Street. Photos and a short description are enough for a first look.
Does a site in Friday Street have to shut while its joints are sealed?
Usually not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we will plan from there.
What causes movement joint sealant to fail?
Most often the movement is too much for the product or the joint width. We review the joint design as well as the sealant before pricing.
What guarantee do you give on joint sealing?
Each job is backed by a 12-month guarantee on the workmanship. Damage from later works or traffic loads outside the joint’s design isn’t a workmanship fault.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Does the weather affect joint sealing?
Sealing onto a damp surface leads to adhesion failure, so external work waits for suitable conditions. The work is simply moved to the next suitable day.
Why act early in Friday Street
Combining joint work with other maintenance reduces set-up costs. Leaking joints need sealing now because damage continues. We can split the scope into urgent and planned. Converted and older buildings near places like Friday Street tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why clients in Friday Street choose us
- Over 20 years of commercial sealing
- Work carried out by CSCS-carded applicators
- Fully insured, including public liability cover
- One contact handling all your sites
Take a look at what affects the cost or our accreditations and insurance.
Places near Friday Street
Also in Friday Street
When to bring in a specialist
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Where floor joints take the most wear near Friday Street
The South East is one of the drier parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints. At about 24 miles from central London, Friday Street is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day.
In a school such as Belmont Prep School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Friday Street is about 3 miles south-west of Dorking, in Surrey. We cover Friday Street, with the same fixed quotes and 12-month guarantee as everywhere else. Friday Street is one of 379 places in Surrey on our list for movement joints. There’s a separate page for London, roughly 24 miles from Friday Street.
Anyone looking for expansion joint sealing in RH5 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Streets here include Sheephouse Lane, Noons Corner Road and Abinger Common Road. Nearby places we also cover include Abinger Bottom (1 mile south), Abinger Common (1 mile west), Coldharbour (2 miles south-east), Forest Green (3 miles south) and South Holmwood (3 miles east) for movement joints. A short drive away, we cover Guildford (9 miles north-west), Woking (12 miles north-west), Epsom (11 miles north-east), Horley (9 miles east), Redhill (10 miles east) and Ewell (12 miles north-east).
Landmarks near Friday Street
In Friday Street, that means premises near Hurtwood House, The Stephan Langton Inn and Wotton and Abinger Commons, among other places. For rail, the closest station is Gomshall station, about 2.9 miles north-west of the centre. A little further out are Abinger Castle (1 mile west) and Mesolithic Museum (1 mile west). Open spaces near Friday Street include Vann Lake and Combe Bottom.
Owners, agents and contractors
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Do you need expansion joint sealing in Friday Street?
On trafficked joints, wheels and salts do the damage. Wheel loads stress the sealant and the arrises. The product has to be suited to the traffic.
What tends to prompt an enquiry:
- Sealant pulling off the joint face
- Brittle, chalky sealant on external joints
- Movement joints with split or torn sealant
- Water dripping through deck or ramp joints
For an occupier at a site such as Chapel Lane Industrial Estate, which lies north-east of Friday Street, the joints at loading doors and dock levellers normally see the hardest wear.
Comparing quotes
- Do they follow the manufacturer’s priming guidance?
- How joint depth will be controlled
- How the existing material will be dealt with
- Their public liability cover
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- A joint that has to be widened or re-detailed before it can work
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Leaks coming from the membrane rather than the joint seal
If in doubt, call the office on 01277 525 020 or use the quote form and we’ll say what we think.
Surfaces we seal
- Blockwork control joints
- Brickwork movement joints
- Car park decks and ramps
- Precast concrete panel joints
- Cladding panel joints
- Podiums and floor movement joints