The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Foxendown expansion joint sealing

We carry out expansion and movement joint sealing in walls, decks and floors in Foxendown and the surrounding area. Send details for a fixed quote.

  • Leaks through car park deck joints onto the level below
  • Torn sealant in brick or block movement joints
  • Joints where the bead has lost adhesion
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
12-month guarantee on our workmanship.
South East, London & Scotland
Constructionline member
£5m public liability

Expansion joint sealing across Foxendown

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Diagnose, treat, sign off

Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For a building around Foxendown, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.

  1. Photos, joint lengths and drawings come to us, or we visit.
  2. We compare each joint’s width with the movement and the sealant’s capability.
  3. Every joint is cleared of the failed seal and any grit packed into it.
  4. Any broken arrises or friable edges are flagged before work goes further.
  5. The right sealant goes in at the right depth, bonded to the two sides only.
  6. Areas reopen once cured, and the work carries our 12-month guarantee.

Before we start on site

  • For older buildings, check the asbestos register before work
  • Have the specification and drawings to hand
  • Clear stock, furniture or equipment away from the joints

Request a quote

We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, give us a call on 01277 525 020 or send photos by email.

Get a price

Read more

About our expansion joint sealing in Foxendown

Internal floor joints take trolleys, pallet trucks and forklifts. Without a sound filler, joint edges chip and spall under load so the product has to suit both the traffic and the movement. We will tell you if the edges need repairing before sealing, and phased work keeps areas in use. Site teams most often ask us about sealant peeling off one face of the joint and water dripping through deck or ramp joints, across car park decks and ramps, podiums and floor movement joints and blockwork control joints. Looking for mastic applicators who cover Foxendown? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.

Around smaller places such as Foxendown, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.

The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.

Mastic Doctor team members lined up next to their branded vans outside an office building
Place
Foxendown (DA13)
Wider area
Kent
Cover
A 12-month guarantee
Quotes
Fixed quote, scope in writing
Call
01277 525 020
Page updated
3 November 2026

Expansion joint sealing around Foxendown: points for this area

Foxendown sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open. At about 22 miles from central London, Foxendown is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds, and their floor joints take forklift and pallet-truck traffic all day.

On industrial estates such as Bowes Industrial Centre, 1 mile south-west of Foxendown, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic. In a school such as Meopham Community Academy, movement joints in brick, block and hall floors tend to be forgotten until they leak. Hospital campuses such as Gravesham Community Hospital (to the north of Foxendown) grow in stages, leaving movement joints wherever new blocks meet old.

Foxendown is about 4 miles south of Gravesend, in Kent. Looking for expansion joint sealing in Foxendown? We can help. Foxendown is one of 931 places in Kent on our list for movement joints. There’s a separate page for London, about 22 miles away.

Business premises anywhere in DA13 are within our area. Buildings on Foxendown Lane and Brimstone Hill are within our area for movement joints. We also cover Meopham (1 mile north-west), Priestwood (1 mile south), Sole Street (1 mile north), Luddesdown (1 mile east) and Priestwood Green (1 mile south) for movement joints. A short drive away, we cover Maidstone (10 miles south-east), Dartford (8 miles north-west), Sevenoaks (10 miles south-west), Gravesend (4 miles north), Tonbridge (12 miles south) and Northfleet (4 miles north).

Around Foxendown

Recent enquiries here include premises near Meopham School, The Railway Inn and Camer Park Country Park and the streets around them. Foxendown’s nearest station is Sole Street station, about 1 mile north. Other landmarks nearby include Coldrum Long Barrow (3.3 miles south) and Gravesham Community Hospital (5.1 miles north). The countryside around Foxendown includes Gad's Hill and Ranscombe Farm.

Map of Foxendown © OpenStreetMap contributors

Different surfaces, different methods

Brickwork and blockwork joints

Long brick and block elevations have movement joints at intervals. We use a sealant rated for the movement, usually low-modulus laid over backing rod at the correct depth.

Internal floor movement joints

Forklift and pallet-truck wheels break unsupported joint edges. We match the product to the traffic and the movement, and tell you if edges need repairing first.

Cost factors for movement joints

Quotes vary with the job. Expect it to depend on:

  • Removal of failed or old sealant
  • Backing rod, priming and other preparation
  • Any access equipment needed
  • Travel to remote or island sites

Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.

Before you send an enquiry

It doesn’t need to be a full survey. These details are enough to start:

  • Your programme or deadline
  • A wide shot and a close-up of the area
  • Where the site is, with the postcode
  • Anything awkward about access or site hours

Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.

Should maintenance staff do it?

For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.

What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.

Building owners, agents and FMs in Foxendown

When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.

We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Foxendown. Several sites can go on one quote, so there’s one set of paperwork to deal with.

Your questions answered

Is Foxendown too small for you to travel to?

Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.

Can you work on a hospital site such as Gravesham Community Hospital?

Yes, healthcare and care buildings are part of our work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.

Can you follow the specification on our project?

Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.

What happens if it rains on the day?

The joint has to be dry, and the air and surface temperature inside the product’s limits. Cold, damp or frosty mornings can stop work outside, so we plan with the forecast in mind.

Why has the sealant in our expansion joints split?

Most often the movement is too much for the product or the joint width. That’s why we check width, depth and movement class before quoting so the same failure isn’t repeated.

How soon can the area be used again?

That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.

Do you offer coloured sealant?

It depends on the product. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.

What we can’t put right

Being straight saves everyone time. Fresh joints won’t solve:

  • Changing the joint layout or spacing of a structure
  • Movement on a scale no sealant is meant to absorb
  • Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)

If you’re not sure, just speak to us on 01277 525 020 or email a schedule or drawings and we will give you a straight answer.

Joints and surfaces we work on

  • Cladding panel joints
  • Car park decks and ramps
  • Precast concrete panel joints
  • Blockwork control joints
  • Podiums and floor movement joints
  • Brickwork movement joints
Accreditations

Trusted. Accredited. Insured.