Expansion Joint Sealing in Fordstreet
Expansion joint sealing in Fordstreet, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Movement joints with split or torn sealant
- Water getting into the wall through a failed joint
- Brittle, chalky sealant on external joints
Expansion joint sealing across Fordstreet
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle expansion joint sealing in Fordstreet
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. Every one calls for a sealant picked for its movement, exposure and traffic and we name it in the quote. The enquiries we see most involve hardened, cracked sealant on exposed facades and movement joints with split or torn sealant, across cladding panel joints, blockwork control joints and brickwork movement joints. Most enquiries from Fordstreet start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Around smaller places such as Fordstreet, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Fordstreet (CO6)
- Region
- Essex
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: Fordstreet
Can you take on a job at a hospital such as Essex County Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Fordstreet off your patch?
No. Small places get the same service as large ones. London and every South East county are within our area. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Which product is best for expansion joints?
Movement capability matters most, classified under BS EN ISO 11600. Hybrid or MS polymer products suit some mixed-material joints.
Is colour matching possible?
That depends on the product. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, phone 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
What do you charge?
There isn’t a price list, as every site differs. Send photos or drawings and we will price it at a fixed figure.
Can the building stay open while you work?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Traffic, movement and joints around Fordstreet
Central London is about 47 miles from Fordstreet. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital. Fordstreet sits in one of the drier corners of the country, the South East. External joints still wait for dry conditions, and winter de-icing salt on car parks and ramps works into any open joint.
Schools such as Holy Trinity CofE Primary School have movement joints in their walls and floors that are easy to overlook. For a store at a site such as Stane Retail Park, 2 miles south-east of Fordstreet, the service yard and goods-in area are where joints break down first.
Fordstreet is about 5 miles west of Colchester, in Essex. Any commercial site in Fordstreet is covered, for single jobs and planned programmes alike. Fordstreet is one of 644 places we cover in Essex for movement joints. For work in that direction, see our London page.
Anyone looking for expansion joint sealing in CO6 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Ford Street, Fordstreet Hill and Ponders Road or nearby, we can quote for movement joints. Just outside Fordstreet, we also work in Rose Green (1 mile north-west), Chappel (2 miles north-west), Swan Street (2 miles west), Wakes Colne (2 miles north-west) and Great Tey (2 miles west). A short drive away, we cover Colchester (5 miles east), Braintree (10 miles west), Maldon (13 miles south), Witham (10 miles south-west), Camulodunum (4 miles south-east) and Halstead (7 miles west).
Landmarks near Fordstreet
We work on buildings around The Queen's Head Public House and the streets around them. The nearest railway station is Chappel & Wakes Colne station, about 1.8 miles north-west of the centre. Well-known places in the area include Essex County Hospital (4.4 miles east) and Mount Bures (3.6 miles north). Green spaces nearby include Iron Latch.
Common problems we fix in Fordstreet
Some joints were never sealed with the right product. Products not classed for the movement fail early. Movement capability is set out in BS EN ISO 11600, and specifications often refer to it.
Things that normally lead to an enquiry:
- Expansion joints split through the centre of the bead
- Water getting into the wall through a failed joint
- Previous reseals laid over old sealant
- Leaks through car park deck joints onto the level below
For an estate such as Essex County Hospital (4.4 miles east of Fordstreet), the joints in ramps, decks and long building elevations all need attention over time.
What your quote should include
- The named product and why it was chosen
- Who will actually carry out the work
- Proof of insurance
- Whether old or failed sealant will be cut out, not overlaid
Cost factors for movement joints
To price the job, we consider:
- Backing rod, priming and other preparation
- Site requirements such as inductions and permits
- Removal of failed or old sealant
- Working within restricted access windows
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- Clear photos of the problem areas
- Whether an asbestos survey exists
- Any specification or named product
- The postcode of the building
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, which keeps the paperwork simple.
After the work
A few simple habits keep the new joints working:
- Reopen bays and walkways only after the stated cure time
- Raise snow-clearing blades over deck joints where possible
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Record the sealant used and the date in the O&M file
On car parks, winter clearance can damage deck joint sealant. Raising blades over joints where possible protects the seal.
An open joint fills with grit, and a joint full of grit can’t close. The arrises crack and break away under the load and the reseal becomes an edge repair as well. Keeping the seal sound avoids all of that.
Diagnose, treat, sign off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Jobs in and around smaller places like Fordstreet are typically planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take and tell you if the design looks wrong for the movement.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Preparing the site
- Tell us what induction or permit system the site runs
- Clear stock, furniture or equipment away from the joints
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, call 01277 525 020 or email us.
Advice
Different surfaces, different methods
Podium joints
On podiums, the joint can belong to a larger waterproofing detail. Where the specification calls for sealant, we reseal.
Concrete and precast panel joints
Precast panels often have surface residues that sealant won’t bond to. We prepare the faces thoroughly and prime where the maker calls for it and check the edges for soundness as we go.