The Mastic Doctor team standing beside their branded vans outside an office building
Oxfordshire · England

Expansion joint sealing in Fencott

Expansion joint sealing in Fencott, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.

  • Joints packed with grit and debris
  • Spalled or broken joint edges in floors and decks
  • Water getting into the wall through a failed joint
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
Covering the South East & Scotland
Constructionline member
£5m public liability

Need expansion joint sealing in Fencott?

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Expansion joint sealing in Fencott, done properly

Joints in car park decks and ramps are among the hardest-working in any building. Wheel loads, grit and de-icing salts attack the seal and the concrete either side. We reseal deck and ramp joints with a trafficable sealant chosen for the movement. If you have water dripping through deck or ramp joints and rain penetration at brick or block movement joints, we can put it right. Looking for mastic applicators who cover Fencott? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.

For a site near Fencott, measurements and photos up front mean one trip where possible. Tell us the joint widths if you can, and what drives or walks over them.

A 12-month guarantee applies to all our work. If an installation problem shows up, give us a call on 01277 525 020 or email a schedule or drawings and we will arrange a return visit.

Mastic Doctor team members lined up next to their branded vans outside an office building
Place
Fencott (OX5)
Region
Oxfordshire
Cover
12 months on our workmanship
Price
Quoted before any work starts
Telephone
01277 525 020
Page updated
3 November 2026

Keeping the joints sound

Your facilities or cleaning team can help the joints last. Pass these on to them:

  • Leave barriers in place until fresh joint sealant has cured
  • Act on the first tear or lifting edge rather than waiting
  • Brief car park operatives to protect joint lines during winter clearance
  • Plan racking layouts so feet don’t land on a joint

On car parks, winter clearance can damage deck joint sealant. Raising blades over joints where possible protects the seal, and it’s worth checking joints once the cold weather has passed.

Joints sealed at the same time generally fail around the same time. It pays to check every joint, not just the obvious one so you can prioritise and budget. We’ll tell you which movement joints need doing now and which can wait.

What happens if it’s left?

A failed joint seal doesn’t mean the slab, panel or wall needs replacing. If the material either side is sound, a properly prepared reseal restores the joint. We’ll flag where edges need repair before sealing. Older rural buildings around Fencott move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.

There’s no price list, since every building and every scope is different. Call for a quote and we will price your job on its own details.

Why choose Mastic Doctor in Fencott

  • Colour options checked against the specified product
  • A fixed quote before work starts
  • Public liability insurance in place
  • Health and safety: CHAS accredited

Take a look at how commercial sealant jobs are priced and how we’re accredited.

Owners, agents and contractors

FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.

Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.

Our process

Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Rural sites near Fencott may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.

  1. Photos, joint lengths and drawings come to us, or we visit.
  2. We compare each joint’s width with the movement and the sealant’s capability, and flag anything that needs an engineer.
  3. Old sealant and debris are cut out of every joint.
  4. Any broken arrises or friable edges are flagged before work goes further.
  5. The right sealant goes in at the right depth, bonded to the two sides only.
  6. Each area is handed back after its cure time, under our 12-month guarantee.

Preparing the site

  • Tell staff and tenants when we will be in
  • Explain the parking and delivery arrangements
  • Make sure the joints can be reached

Quotes

Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, phone 01277 525 020 or use the quote form.

Get a quick quote

Related advice

Slabs, ramps and loading bays in Fencott

Fencott is in the South East, one of the UK’s drier regions. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in. At about 52 miles from central London, Fencott is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors.

Sites like Bicester Community Hospital (to the north of Fencott) carry ambulances, deliveries and visitors’ cars over their road and deck joints. In a school such as Charlton-on-Otmoor Church of England Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.

Fencott is about 4 miles south of Bicester, in Oxfordshire. Looking for expansion joint sealing in Fencott? We can help. We work across 423 places in Oxfordshire, large and small. Oxford is covered too, some 7 miles away.

If you need expansion joint sealing in OX5, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your building is just outside Fencott, we cover Murcott (1 mile south-east), Charlton-on-Otmoor (1 mile west), Merton (1 mile north), Upper Arncott (2 miles east) and Wendlebury (2 miles north-west). Bigger towns within reach include Oxford (7 miles south-west), Bicester (4 miles north), Abingdon-on-Thames (12 miles south-west), Witney (14 miles west), Thame (11 miles south-east) and Kidlington (5 miles west).

Local landmarks in Fencott

We work on buildings around The Crown pub. The closest station to Fencott is Islip station, roughly 3.2 miles west. Other landmarks nearby include Bicester Avenue (3.2 miles north) and Bicester Community Hospital (3.8 miles north). Not far away are Otmoor RSPB reserve and Graven Hill.

Map of Fencott © OpenStreetMap contributors

Cost factors for movement joints

A fixed quote reflects the actual work. It takes account of:

  • The total length or number of joints
  • Location, for remote and island sites
  • Whether the work must be split into stages
  • Induction, permit and paperwork requirements

Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.

Before you send an enquiry

For an accurate fixed quote, we need to understand the site. Useful things to include:

  • Clear photographs of the problem areas
  • Specification clauses that apply
  • The asbestos register, for older buildings
  • Whether the building will be occupied during the work

A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.

General trades versus a specialist

Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.

Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.

FAQs: Fencott

Must our site in Fencott stop work while the joints are done?

In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. We agree the sequence and timings with you before we start.

Is Fencott too small for you to travel to?

Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.

What do you charge?

Every job gets its own fixed quote. To get one, speak to us on 01277 525 020 or send details through our quote form with a description of the work.

Will your applicators have CSCS cards?

Yes. If you need card details for site access, tell us and we will confirm them with the quote.

Can the building stay open while you work?

Yes, with some planning. Tell us your site hours and access windows and we will plan around them.

Do you need to see the site first?

Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit before quoting.

Does the weather affect joint sealing?

The joint has to be dry, and the air and surface temperature inside the product’s limits. Frost, rain and condensation on steel or concrete can hold up external work.

Accreditations

Trusted. Accredited. Insured.