Faulkbourne expansion joint sealing
We carry out expansion and movement joint sealing in walls, decks and floors in Faulkbourne and the surrounding area. Send photographs or drawings for a fixed quote.
- Water dripping through deck or ramp joints
- Spalled or broken joint edges in floors and decks
- Joints packed with grit and debris
Expansion joint sealing in Faulkbourne
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
On site: what to expect
Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Rural sites near Faulkbourne may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- Next, we fix a price and confirm the sealant we propose for the movement.
- We strip out the old seal and prepare the faces.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
Before we start on site
- Tell us what induction or permit system the site runs
- Warn occupants and staff about the work
- Clear stock, furniture or equipment away from the joints
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or send details through our quote form.
Related advice
About our expansion joint sealing in Faulkbourne
Every structure moves a little, all the time: they expand in the heat, shrink as they dry, and shift under load. Movement joints are where that movement is absorbed and the seal across each one keeps out water and grit. Mastic Doctor reseals movement joints in brickwork, blockwork, concrete, cladding and floors on sites in Faulkbourne. We work on cladding panel joints, podiums and floor movement joints and brickwork movement joints, and the failures we’re asked to look at most are joints where the bead has lost adhesion and movement joints with split or torn sealant. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Faulkbourne, that means joint design, primers and backing rod as standard.
Around smaller places such as Faulkbourne, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Location
- Faulkbourne (CM8)
- Wider area
- Essex
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Faulkbourne: questions and answers
Is Faulkbourne too far out for you?
No. Places such as Faulkbourne are covered as much as the big towns. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Do you cover business parks and estates near Faulkbourne, such as Lanham Business Park?
Yes. Our area takes in Faulkbourne and its surroundings, with estates and business parks such as Lanham Business Park included. To start, just call 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators.
Can you work on car park ramps and decks?
Yes, we do. These joints take wheels, salt and water, so product choice matters and broken edges are flagged before sealing.
Can staff carry on working while you are here?
In most cases, yes. We phase the work so most of the building stays in use.
Which product is best for expansion joints?
We choose a sealant with a movement capability that suits the joint as set out in BS EN ISO 11600. Where two different materials meet, a hybrid sealant can be the better choice.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Site staff or a sealant specialist?
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
When to call us in Faulkbourne
When the movement exceeds the sealant’s capability, the bead tears. A joint that’s too narrow for the movement, or a product with the wrong movement class, will split through the middle. Resealing like for like often fails the same way, so we check width and movement before quoting.
Site and facilities staff are often the first to spot these:
- Movement joints with split or torn sealant
- Damp inside where a wall movement joint has failed
- Expansion joints filled with dirt and stones
- Layers of sealant in a movement joint
For a school such as New Rickstones Academy, playground and building joints can be done in the holidays.
What your quote should include
- How the existing material will be dealt with
- Health and safety accreditation such as CHAS
- Proof of insurance
- Their approach to joint depth and backing
Nearby places to Faulkbourne
Also in Faulkbourne
Warehouse floors and decks around Faulkbourne
Faulkbourne lies roughly 37 miles out from central London. The roads out of London are lined with trade parks and distribution sheds. Faulkbourne sits in one of the drier corners of the country, the South East. External joints still wait for dry conditions, while winter salting gets into any joint left open.
Hospital campuses such as William Julien Courtauld Hospital, 4.3 miles to the north-west of Faulkbourne, grow in stages, leaving movement joints wherever new blocks meet old. For buildings at a park such as Lanham Business Park, 2.8 miles to the north of Faulkbourne, brick and panel movement joints are easy to forget until one leaks.
Faulkbourne is about 2 miles north-west of Witham, in Essex. Businesses, contractors and managing agents in Faulkbourne use us for work on movement joints. Across Essex, 644 places are covered, Faulkbourne among them. For work in that direction, see our London page, about 37 miles away.
If you need expansion joint sealing in CM8, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your building is just outside Faulkbourne, we cover Silver End (2 miles north-east), Rivenhall (2 miles east), Witham (2 miles south-east), Cressing (2 miles north) and Lanham Green (3 miles north). Nearby towns on our patch include Colchester (13 miles east), Chelmsford (8 miles south-west), Braintree (4 miles north-west), Maldon (7 miles south-east), Wickford (15 miles south) and Camulodunum (12 miles east).
Local landmarks in Faulkbourne
In Faulkbourne, that means premises near The Cross Keys pub. For rail, the closest station is White Notley station, roughly 1.1 miles north. Other landmarks nearby include Cressing Temple (0.9 miles north) and William Julien Courtauld Hospital (4.3 miles north-west). Green spaces nearby include Sandylay and Moat Woods.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
How the job changes by surface
Podium joints
Podium joints often sit within a waterproofing system. We reseal the joint where sealant is the specified fix, and tell you if the problem looks like the waterproofing below.
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. A trafficable sealant suited to the movement goes in, phased so parts of the car park stay open.
Maintenance after handover
For the best life from the joints:
- Keep product details with the building records for the next reseal
- Reopen bays and walkways only after the stated cure time
- Inspect movement joints alongside other routine building checks
- Check joints after long freezing spells
Floor joints on main traffic routes need watching more closely than the rest. Keep racking feet and heavy point loads off joint lines and flag chipped arrises before they spread.
Floor joints with failed fillers break up quickly under wheels. Broken arrises jolt trucks, loads and drivers and the broken length grows with every pass. Keeping the filler or sealant sound protects the floor.