Esher expansion joint sealing
Work needed on a movement joint in Esher? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Damp inside where a wall movement joint has failed
- Weathered movement joint sealant that no longer flexes
- Chipped joint edges on forklift routes
Expansion joint sealing in Esher
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How the job changes by surface
Brickwork and blockwork joints
Brick and block edges need careful preparation. We clean them back to sound material and prime where the manufacturer specifies, then seal and tool the joint.
Car park decks and ramps
Water coming through deck joints is the usual first sign. The old seal comes out, the edges are prepared and the joint resealed, and we’ll tell you if any edges need repairing first.
How we handle expansion joint sealing in Esher
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. Every one calls for a sealant picked for its movement, exposure and traffic and we name it in the quote. We work on cladding panel joints, brickwork movement joints and precast concrete panel joints, and what we’re called in for most is previous reseals laid over old sealant and arrises breaking up along floor joints. Whoever orders the work in Esher, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Small units near places like Esher are often converted farm buildings with new concrete floors. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.
A 12-month guarantee applies to all our work in Surrey. If an installation problem shows up, call 01277 525 020 or use the quote form and we will arrange a return visit.
- Where
- Esher (KT10, KT7, KT8)
- Region
- Surrey
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What we’re called out for in Esher
Sometimes the sealant holds but the substrate breaks away. Weak or crumbling concrete, brick or render edges give the sealant nothing sound to grip.
Things that typically lead to an enquiry:
- Movement joints with split or torn sealant
- Debris jammed in movement joints
- Brittle, chalky sealant on external joints
- Damp inside where a wall movement joint has failed
University campuses such as Kingston University Penrhyn Road Campus, 3.5 miles to the north-east of Esher, have car parks, paved walkways and building elevations with movement joints.
Comparing quotes
- Will CSCS-carded applicators be on site?
- Whether old or failed sealant will be cut out, not overlaid
- Can the work be phased to keep areas open?
- Health and safety accreditation such as CHAS
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. What matters most for a job in Esher is a clear list of what needs doing. A fixed quote follows.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
What we need from you
- Agree which areas must stay open
- Confirm the product named in the specification
- Clear stock, furniture or equipment away from the joints
Get a fixed quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or send photos by email if you’d rather talk the job through.
Related advice
Leave it or put it right?
Leaving a failed movement joint rarely stays a small problem. Grit and water fill the gap and the material either side breaks up, so a reseal turns into an edge repair as well. Resealing early keeps the work to sealant. Sealant hardens, cracks and loses grip with age, UV and movement. Replacing it before it fails keeps water out.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Why choose Mastic Doctor in Esher
- A range of standard colours, depending on the product
- Over 20 years of commercial sealing
- CHAS accredited
- Matching to RAL references, product permitting
Take a look at how commercial sealant jobs are priced or our accreditations and insurance.
Warehouse floors and decks around Esher
Esher has at least three named business or industrial parks inside a 3-mile radius. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. Esher is in the South East, one of the UK’s drier regions. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in.
For an occupier at a site such as Hersham Trading Estate (1.2 miles north-west of Esher), the joints at loading doors and dock levellers usually see the hardest wear. Hospital campuses such as Molesey Community Hospital (1.9 miles north of Esher) grow in stages, leaving movement joints wherever new blocks meet old.
Esher is about 5 miles north-west of Epsom, in Surrey. Commercial clients in Esher can call on us for movement joints, as part of our coverage of Surrey. Across Surrey, 379 places are covered, Esher among them. Sites around London have their own page, about 15 miles away.
Commercial sites across KT10, KT7 and KT8 are covered. If your site is on High Street, Station Road and Warren Close or close by, send details and we will quote for movement joints. Being close to the A244 and A307, Esher is easy to get to with materials and equipment. Just outside Esher, we also work in West End (1 mile south-west), Lower Green (1 mile north), Hinchley Wood (1 mile east), Claygate (1 mile south-east) and Weston Green (1 mile north-east). Nearby towns on our patch include Guildford (12 miles south-west), Woking (10 miles west), Epsom (5 miles south-east), Redhill (12 miles south-east), Ewell (5 miles east) and Egham (9 miles north-west).
What’s near Esher
Recent enquiries here include premises near Albert Arms, Esher Church of England High School and Claremont Park, among other places. Esher’s nearest station is Esher station, about 0.8 miles north-east. Well-known places in the area include Chessington Castle Hill (3.2 miles east) and No. 2 New Zealand General Hospital (2.9 miles north-west). The countryside around Esher includes Jubilee Wood and The Lake.
General trades versus a specialist
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Places near Esher
What else we do in Esher
Common questions from Esher clients
Would you work within a site like Molesey Community Hospital?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Does your area include sites such as Hersham Trading Estate, near Esher?
Yes. We cover Esher and the area around it, including industrial estates, business parks and retail parks such as Hersham Trading Estate. Photos and a short description are enough for a first look.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
How much does the work cost?
There isn’t a price list, as every site differs. Send photographs or drawings and we’ll price it at a fixed figure.
After the work
After handover, a little attention goes a long way:
- Raise snow-clearing blades over deck joints where possible
- Keep product details with the building records for the next reseal
- Plan racking layouts so feet don’t land on a joint
- Inspect exposed joints once the cold weather has passed
Keep wheels, feet and water off new joints until the sealant has cured. The time varies with product, conditions and joint depth. Keeping the area coned off until then avoids tyre marks and damage.
On a multi-storey car park, a failed joint usually shows up as a leak onto the deck underneath. That water often carries de-icing salts with it. Sealing the joint promptly stops it at source.