Expansion Joint Sealing in Eastling
We carry out expansion and movement joint sealing in walls, decks and floors in Eastling and the surrounding area. Send photographs or drawings for a fixed quote.
- Movement joints with split or torn sealant
- Water getting into the wall through a failed joint
- Layers of sealant in a movement joint
Need expansion joint sealing in Eastling?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing in Eastling
Joint design counts for as much as the sealant itself. Joint width must suit the movement and the movement class of the sealant, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises and the bead bonds to the sides, never the back. If you are dealing with arrises breaking up along floor joints and sealant peeling off one face of the joint, we can put it right, whatever the surface. For commercial sealant work in Eastling, you deal with one contact from quote to sign-off, whether it’s one building or several.
In and around smaller places like Eastling, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Location
- Eastling (ME13)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Questions we are asked in Eastling
Is Eastling too small for you to travel to?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Which documents can you supply for work in Eastling?
RAMS, insurance certificate, CSCS details: list what the site needs and we will confirm it with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Can the building stay open while you work?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Can the sealant be colour-matched?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Do the joint edges need to be sound before sealing?
A bond is only as strong as the material behind it, so we will tell you if the edges need repairing before sealing. We flag it at the quote stage where we can see it.
Places near Eastling
Also in Eastling
Expansion joint sealing in Eastling: the local picture
At about 42 miles from central London, Eastling is within reach of the capital. Warehousing clusters around the motorways that ring and radiate from London. Eastling is in the South East, one of the UK’s drier regions. Even so, yard and car park joints are only sealed when they’re dry and clean, and gritting in cold spells finds its way into open joints.
For a school such as Eastling Primary School, playground and building joints can be done in the holidays. For floors and slabs around Eastling, the product is chosen for the traffic and the movement at each joint.
Eastling is about 4 miles south-west of Faversham, in Kent. Our applicators travel to Eastling for work on movement joints. Our Kent coverage takes in 931 places, from busy centres to rural villages. Our London page has more on work in that area, about 42 miles away.
Anyone looking for expansion joint sealing in ME13 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your site is on The Street, Meeson's Close and Eastling Road or close by, send details and we’ll quote for movement joints. Just outside Eastling, we also work in The Valley (2 miles south), Throwley (2 miles south-east), Throwley Forstal (2 miles south-east), Painter's Forstal (2 miles north-east) and Stalisfield Green (2 miles south). Further afield, our area takes in Maidstone (12 miles west), Ashford (10 miles south), Canterbury (12 miles east), Sittingbourne (6 miles north-west), Whitstable (11 miles north-east) and Faversham (4 miles north-east).
Local landmarks in Eastling
In Eastling, that means premises near Doddington Place Gardens and Carpenters Arms Inn and the streets around them. The closest station to Eastling is Teynham station, about 3.9 miles north. Other landmarks nearby include Newnham Castle (0.9 miles north-west).
General trades versus a specialist
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Jobs in and around smaller places like Eastling are typically planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- A fixed quote follows, naming the sealant and its movement class.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, and we tell you if any edges need repairing first.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Each joint is inspected and handed over with our 12-month guarantee.
Before we start on site
- Point out any areas we must not close
- Tell staff and tenants when we’ll be in
- Make sure the joints can be reached
Ask for a quote
To get a fixed quote, speak to us on 01277 525 020 or email us. You can also send details through our quote form.
Read more
Maintenance after handover
Your facilities or cleaning team can help the joints last. Share these points with them:
- Brief car park operatives to protect joint lines during winter clearance
- Keep traffic off new joints until the cure time is up
- Act on the first tear or lifting edge rather than waiting
- Include every elevation and deck joint in periodic inspections
Every joint we seal is backed by a 12-month guarantee on workmanship. Keep the handover details, product and date with your O&M records, so the next reseal starts with the facts.
A failed deck joint lets water straight through to the level below. Salty water dripping through stains soffits and lands on parked vehicles, which is bad news for the concrete and the people parking below. Resealing early limits the damage.
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Crumbling edges that would give a new bead nothing sound to grip
- Damaged metal nosings or cover plates over a joint
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
If in doubt, speak to us on 01277 525 020 or send details through our quote form and we’ll say what we think before you book.
Surfaces we seal
- Podiums and floor movement joints
- Brickwork movement joints
- Cladding panel joints
- Blockwork control joints
- Car park decks and ramps
- Precast concrete panel joints
What the job involves on each surface
Podium joints
On podiums, the joint can belong to a larger waterproofing detail. We reseal the joint where sealant is the specified fix.
Brickwork and blockwork joints
A brick movement joint full of old mortar or debris can’t close. We clear the joint fully before sealing.
How the quote is worked out
Each job is priced on its own details. The main factors are:
- The total length or number of joints
- The product specified
- The site’s rules and procedures
- Access and working height
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we will explain how it’s made up.
Before you send an enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Rough lengths or quantities, or drawings if you have them
- The asbestos register, for older buildings
- Anything awkward about access or site hours
- The product your specification calls for
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to ring 01277 525 020 or email us with what you know.