Bursledon expansion joint sealing
Commercial sealant work in Bursledon for contractors, FMs and building owners: expansion and movement joint sealing in walls, decks and floors, quoted at a fixed price.
- Sealant peeling off one face of the joint
- Expansion joints filled with dirt and stones
- Chipped joint edges on forklift routes
Expansion joint sealing for businesses in Bursledon
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Why act early in Bursledon
Some quotes just add sealant over the old bead. A bead laid on top of the failed one neither grips nor flexes properly and soon lets go. Full removal and preparation is in every quote. Small buildings around Bursledon suffer from failed joints as much as large ones. Catching it early means a reseal rather than repairs.
Pricing movement joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Why appoint us
- A range of standard colours, depending on the product
- Matching to RAL references, product permitting
- CHAS accredited contractor
- Constructionline member for supplier checks
See how commercial sealant jobs are priced or how we’re accredited.
Expansion joint sealing for commercial buildings in Bursledon
We cover the full range of movement joints: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. Every one calls for a sealant picked for its movement, exposure and traffic, and we’ll confirm the choice in the quote. We work on podiums and floor movement joints, brickwork movement joints and cladding panel joints, and the failures we’re asked to look at most are hardened, cracked sealant on exposed facades and arrises breaking up along floor joints. Facilities teams, main contractors and managing agents in Bursledon tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around Bursledon, most floor and movement joint jobs are single buildings or yards, so we gather photographs and measurements first. Getting widths, depths and traffic details up front means one visit, not two.
A 12-month guarantee applies to all our work in Hampshire. Should something we installed fail, phone 01277 525 020 or send photos by email and we will come back to it.
- Place
- Bursledon (SO31)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Where floor joints take the most wear near Bursledon
With the shore within about 2 miles, Bursledon counts as a coastal location. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, and edges left open tend to break up faster. Bursledon has at least three named business or industrial parks inside a 3-mile radius. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
For buildings at a park such as Ensign Way Business Park (2.1 miles south of Bursledon), brick and panel movement joints are easy to forget until one leaks. For a school such as Bursledon Church of England Infant School, playground and building joints can be done in the holidays.
Bursledon is about 2 miles south of Hedge End, in Hampshire. We cover commercial sites throughout Bursledon, for single jobs and planned programmes alike. 723 places across Hampshire fall within our area, Bursledon among them.
If you need expansion joint sealing in SO31, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on High Street, Station Road and School Road and the roads nearby. Just outside Bursledon, we also work in Lowford (1 mile north-west), Old Netley (1 mile west), Butlocks Heath (1 mile south-west), Hound (1 mile south-west) and Netley (2 miles south-west). Nearby towns on our patch include Winchester (12 miles north), Gosport (9 miles south-east), Havant (14 miles east), Eastleigh (6 miles north), Fareham (6 miles south-east) and Horndean (13 miles east).
What’s near Bursledon
Locally, jobs take us to sites close to The Hamble School, Grove Park Business and Enterprise College and Westwood Woodland Park, among other places. The closest station to Bursledon is Bursledon station, about 0.5 miles south-east. A little further out are Bursledon Brickworks Industrial Museum (1.1 miles east) and Coldeast (1.8 miles south-east). For a walk, there’s Netley Common.
Nearby places to Bursledon
More services for Bursledon
What we’re called out for in Bursledon
When a bead pulls away from one face, it has lost adhesion. Dusty, damp or contaminated faces, a missing primer and three-sided adhesion are the usual causes.
What tends to prompt an enquiry:
- Hardened, cracked sealant on exposed facades
- Arrises breaking up along floor joints
- Car park joints leaking onto vehicles below
- Torn sealant in brick or block movement joints
At places like Hedge End Retail Park, 2.1 miles to the north of Bursledon, joints are sealed a section at a time so operations carry on.
Questions to ask before you book
- Their public liability cover
- What site paperwork they can supply
- Their plan for phasing and protecting the area
- How the existing material will be dealt with
How the quote is worked out
What shapes the price:
- Distance, for remote addresses
- The total length or number of joints
- Induction, permit and paperwork requirements
- Whether the work must be split into stages
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What we need to price the job
We can often quote from photos and a few details. Please tell us:
- Access details, including height
- Your programme or deadline
- What the building is and how it’s used
- Asbestos survey details if the building is older
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to phone 01277 525 020 or email drawings and photos.
How a job runs
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. For a job in Bursledon, the main thing is a clear picture of the work. A fixed quote follows.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Each joint is inspected and handed over with our 12-month guarantee.
What we need from you
- Tell us your opening times and when work is allowed
- Tell us what induction or permit system the site runs
- Send asbestos survey details if the building is pre-2000
Request a quote
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or ring 01277 525 020 or email drawings and photos if you’d rather talk the job through.
Read more
Keeping the joints sound
For the best life from the joints:
- Check joints after long freezing spells
- Act on the first tear or lifting edge rather than waiting
- Record the sealant used and the date in the O&M file
- Keep racking legs and heavy point loads off floor joints
Snow ploughs and scrapers catch on joint lines. Raising blades over joints where possible protects the seal.
Floor joints with failed fillers break up quickly under wheels. Broken arrises jolt trucks, loads and drivers. Keeping the filler or sealant sound protects the floor.
Common questions from Bursledon clients
Does the sea air around Bursledon change the choice of sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We check the specified product suits the exposure and pay close attention to preparation.
Is a smaller place like Bursledon outside your area?
No. Places such as Bursledon are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
Does the weather affect joint sealing?
A wet joint can’t be sealed properly, so external work waits for suitable conditions. We agree a revised date with you.
What sealant do you use in movement joints?
We choose a sealant with a movement capability that suits the joint, classified under BS EN ISO 11600. Where two different materials meet, a hybrid sealant can be the better choice.
How do I request a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
Why do our movement joints keep failing?
The common causes are poor preparation, three-sided adhesion, the wrong movement class and weathering. Working out the cause comes first since each needs a different fix.
Will you quote for a small job?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
For managing agents and facilities managers
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Bursledon can form part of a wider programme.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.