Expansion Joint Sealing in Burmarsh
Expansion joint sealing for Burmarsh, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Weathered movement joint sealant that no longer flexes
- Sealant peeling off one face of the joint
- Layers of sealant in a movement joint
Expansion joint sealing in Burmarsh
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle expansion joint sealing in Burmarsh
Brickwork and blockwork walls have vertical movement joints at intervals that most people only notice when the sealant has gone. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal is cut away, backing rod goes in at depth, and a low-modulus masonry sealant is gunned and tooled. Site teams most often ask us about expansion joints filled with dirt and stones and previous reseals laid over old sealant, on precast concrete panel joints, car park decks and ramps and blockwork control joints. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Burmarsh it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Jobs around smaller places like Burmarsh are planned so the whole job is done in one visit. Note joint widths and the traffic that uses them, and we will take it from there.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Where
- Burmarsh (TN29)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Maintenance after handover
Once the work is signed off, these steps help:
- Leave barriers in place until fresh joint sealant has cured
- Treat a small split as a warning, not a cosmetic issue
- Put movement joints on the planned maintenance inspection round
- Brief car park operatives to protect joint lines during winter clearance
Floor joints on main traffic routes need watching more closely than the rest. Keep racking feet and heavy point loads off joint lines, and report any chipped edges early.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster, and the damage spreads along the joint. Sealing early protects the edges.
What happens if it’s left?
A like-for-like reseal of a joint that keeps splitting rarely lasts. A higher movement class, or a design change by the engineer, may be needed. Older rural buildings around Burmarsh move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why appoint us
- Clear, fixed quotes
- Work to your specification and the manufacturer’s guidance
- A range of standard colours, depending on the product
- Colours confirmed for the specified product
Read our cost guide or our accreditations.
On site: what to expect
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Smaller jobs around Burmarsh can be grouped with others nearby. A fixed quote is given before anything starts.
- We start with photos, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Tell staff and tenants when we will be in
- Make sure the joints can be reached
- Point out any areas we must not close
Getting a fixed quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Related advice
What we can’t put right
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Proprietary pre-formed expansion joint systems
- Waterproofing layers buried beneath the sealant
If in doubt, give us a call on 01277 525 020 or use the quote form and we’ll say what we think.
Where we work in Burmarsh
- Precast concrete panel joints
- Blockwork control joints
- Podiums and floor movement joints
- Cladding panel joints
- Car park decks and ramps
- Brickwork movement joints
Also in Burmarsh
Expansion joint sealing around Burmarsh: what changes locally
Burmarsh is within about 2 miles of the coast. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, which is why split joints are worth sealing before the edges deteriorate. Burmarsh sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, and where de-icing salt is spread in winter, open joints let it in.
Around Burmarsh, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Burmarsh is about 4 miles south-west of Hythe, in Kent. Our applicators travel to Burmarsh for work on movement joints, handled exactly as we handle every other area. We work across 931 places in Kent, large and small. Sites around Brighton have their own page, roughly 51 miles from Burmarsh.
If you need expansion joint sealing in TN29, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Church Road, Painesfield Close and Thorndike Road or close by, we can quote for movement joints. Just outside Burmarsh, we also work in Postling Green (3 miles north-west), St Mary's Bay (3 miles south), Newchurch (3 miles west), St Mary in the Marsh (3 miles south-west) and Aldington (4 miles north-west). Nearby towns on our patch include Ashford (9 miles north-west), Dover (14 miles north-east), Folkestone (8 miles east), Hythe (4 miles north-east), Tower Hamlets (14 miles north-east) and Hawkinge (8 miles north-east).
Landmarks near Burmarsh
Locally, jobs take us to sites close to The Shepherd And Crook Public House. The nearest railway station is Westenhanger station, roughly 3.7 miles north-east. Other landmarks nearby include Hythe Museum (4 miles east) and Lympne Castle (2 miles north-east).
Signs you need expansion joint sealing in Burmarsh
Sun, rain and frost age external movement joints. In time the bead chalks, stiffens and cracks.
Clients typically get in touch after noticing something like this:
- Water dripping through deck or ramp joints
- Torn sealant in brick or block movement joints
- Chipped joint edges on forklift routes
- Layers of sealant in a movement joint
Around Burmarsh, open joints collect water and debris, and the arrises are the next to go.
Comparing quotes
- Whether old or failed sealant will be cut out, not overlaid
- Will RAMS and insurance details be available?
- Do they follow the manufacturer’s priming guidance?
- Their plan for phasing and protecting the area
When to bring in a specialist
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
FAQs: Burmarsh
Do we have to stop operations in Burmarsh while the joints are sealed?
Typically not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we will plan from there.
Is a smaller place like Burmarsh outside your area?
No. Places such as Burmarsh are covered as much as the big towns. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
What timescale should we allow for resealing expansion joints?
It normally takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. Cure time before reopening is confirmed on the day.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure.
Is any job too small?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
Do you offer coloured sealant?
It depends on the product specified. Some ranges are wide, others limited, so we will confirm the colours available for the specified product with the quote.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.