Burford expansion joint sealing
We carry out expansion and movement joint sealing in walls, decks and floors in Burford and the surrounding area. Send details for a fixed quote.
- Rain penetration at brick or block movement joints
- Debris jammed in movement joints
- Weathered movement joint sealant that no longer flexes
Expansion joint sealing across Burford
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle expansion joint sealing in Burford
Joint design counts for as much as the sealant itself. The joint has to be wide enough for the expected movement and the sealant’s movement capability while depth is limited by backing rod or, in shallow joints, a bond-breaker. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises. If you have movement joints with split or torn sealant and weathered movement joint sealant that no longer flexes, we can help. One point of contact handles commercial sealant work in Burford from the first photos to the final walk-round, for single jobs and planned programmes alike.
In a smaller place such as Burford, floor and movement joints are often in agricultural and rural business units, schools and the odd small industrial yard. Concrete floors and yards in these buildings move and crack like any others.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Location
- Burford (OX18)
- Region
- Oxfordshire
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
What sets the cost
Each job is priced on its own details. The main factors are:
- Specialist products, such as fire-rated or hygienic sealants
- Removal of failed or old sealant
- Any access equipment needed
- How much there is to seal
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
What to include in your enquiry
Whether it’s one area or a whole building, these details speed things up:
- Rough lengths or quantities, or drawings if you have them
- What the building is and how it’s used
- How the joints are reached, and at what height
- Photos of the joints, close up and from further back
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Leave it or put it right?
Leaving a failed movement joint rarely stays a small problem. Water and debris get in, the joint jams and the edges spall, so a reseal turns into an edge repair as well. Acting at the first split keeps the cost down. In a smaller place such as Burford, getting a contractor back for a second visit takes time, so we’d suggest renewing all the joints that are going, not just the worst.
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a quote once you have the details.
Why us?
- Work carried out by CSCS-carded applicators
- Workmanship guaranteed for 12 months
- Constructionline member for supplier checks
- Fully insured, including public liability cover
Take a look at what affects the cost and how we’re accredited.
Common questions from Burford clients
Must our site in Burford stop work while the joints are done?
Normally not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
Is Burford too far out for you?
No. Places such as Burford are covered as much as the big towns. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
What timescale should we allow for resealing expansion joints?
Allow a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases. Timings are set out in the quote.
Can you seal car park deck joints?
Yes. Tell us how the car park is used and which areas must stay open and we’ll plan around them.
How do I request a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.
Aftercare for building managers
Problems stay small when the joints are checked regularly. Specifically:
- Treat a small split as a warning, not a cosmetic issue
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Inspect movement joints alongside other routine building checks
- Avoid parking heavy plant or pallets on joint lines
Add every elevation, deck and floor joint to your inspection round. Early splits and edges starting to lift show up on a routine check. Should you spot a problem, you can give us a call on 01277 525 020 or email the details over and send a picture.
External wall joints that fail let rain into the masonry and cavity. It can surface inside as damp a long way from the joint, well after the seal first opened. Catching it early keeps the water outside.
Different surfaces, different methods
Car park decks and ramps
Car park joints are some of the hardest-working joints in any building. A trafficable sealant suited to the movement goes in with bays done in phases so the car park keeps running.
Concrete and precast panel joints
Precast and concrete panel joints move daily. We use a sealant classed for the movement, laid over backing to depth.
Traffic, movement and joints around Burford
Burford lies roughly 69 miles out from central London. Warehousing clusters around the motorways that ring and radiate from London; their floors carry heavy traffic every shift. Burford sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in.
Around Burford, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Burford is about 3 miles north-west of Carterton, in Oxfordshire. Businesses, contractors and managing agents in Burford can call on us for movement joints. Our Oxfordshire coverage takes in 423 places, large and small. Sites around Oxford have their own page, about 18 miles away.
Business premises anywhere in OX18 are within our area for movement joints. If your site is on High Street, Lower High Street and Swan Lane or close by, we can quote for movement joints. Main routes into Burford include the A40 and A361. We also cover Fulbrook (1 mile north-east), Little Barrington (3 miles west), Milton-under-Wychwood (4 miles north), Fifield (4 miles north) and Idbury (5 miles north) for movement joints. Nearby towns on our patch include Witney (6 miles east), Carterton (3 miles south-east), Faringdon (11 miles south), Kidlington (15 miles east), Chipping Norton (10 miles north) and Woodstock (13 miles east).
Landmarks near Burford
Locally, jobs take us to sites close to Burford School and The Royal Oak Public House and the streets around them. Burford’s nearest station is Shipton station, roughly 4.5 miles north-east of the centre.
Diagnose, treat, sign off
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing, and our waste is bagged and taken away as we go. For a site in Burford, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
What we need from you
- Make sure the joints can be reached
- Tell us what induction or permit system the site runs
- Agree which areas must stay open
Request a quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to ring 01277 525 020 or email the details over.
Related advice
When to call us in Burford
With no backing rod or bond-breaker in place, sealant grips the base of the joint too. Sealant fixed to the base and sides can’t flex, so it tears so backing is set before sealing.
Common reasons buildings call us in:
- Leaks through car park deck joints onto the level below
- Torn sealant in brick or block movement joints
- Brittle, chalky sealant on external joints
- Debris jammed in movement joints
Schools like Burford Primary School often have long brick elevations with movement joints that age quietly.
Before you book anyone
- Their public liability cover
- What site paperwork they can supply
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Will CSCS-carded applicators be on site?