Bundalloch expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors in Bundalloch. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Debris jammed in movement joints
- Joints where the bead has lost adhesion
- Water getting into the wall through a failed joint
Expansion joint sealing for Bundalloch sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Expansion joint sealing in Bundalloch
For movement joints in Bundalloch, photos and approximate lengths are the best start. We’ll come and look where photographs don’t show enough before issuing a fixed quote. You can also speak to us on 01277 525 020 or email a schedule or drawings to talk the joints through. If you have leaks through car park deck joints onto the level below and weathered movement joint sealant that no longer flexes, we can put it right. A single leaking joint is often how a building in Bundalloch first comes to us: we look at the rest while we are there and tell you what we find.
In smaller places such as Bundalloch, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Bundalloch (IV40)
- Wider area
- Highland
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Bundalloch can form part of a wider programme across Highland.
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- The total length or number of joints
- Whether old sealant has to be cut out first
- Whether the work must be split into stages
- Backing rod, priming and other preparation
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
What to include in your enquiry
There’s no need for a formal survey. These details are enough to start:
- Access details, including height
- The product your specification calls for
- The postcode of the building
- A wide shot and a close-up of the area
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. If you have questions first, ring 01277 525 020 or send details through our quote form.
Different surfaces, different methods
Car park decks and ramps
Car park joints are some of the hardest-working joints in any building. We use a sealant made for wheel loads and the expected movement with bays done in phases so the car park keeps running.
Internal floor movement joints
Floor joints include saw-cut joints and construction joints. Trafficked floor joints often get a semi-rigid filler and a flexible sealant where the joint moves more.
Where floor joints take the most wear near Bundalloch
Bundalloch lies within about 1 mile of the sea. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. Bundalloch is on Scotland’s wetter western side. Open joints in car parks and yards let in more water than in drier areas. We wait for dry, workable days to seal them.
In and around Bundalloch, the right filler or sealant for each joint depends on the traffic and the movement it takes. Warehouse floors on estates like Ardelve Industrial Estate (1.2 miles south-west of Bundalloch) carry pallet trucks and forklifts over every saw-cut joint.
Bundalloch is in Highland. Commercial clients in Bundalloch use us for work on movement joints, as part of our coverage of Highland. We work across 256 places in Highland, large and small.
Postcode districts covered here: IV40 for movement joints. Close to Bundalloch, our area also takes in Carndu (1 mile south-west), Dornie (1 mile south-west), Auchtertyre (4 miles west), Inverinate (5 miles south-east) and Strome Ferry (5 miles north-west). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
Local landmarks in Bundalloch
For rail, the closest station is Stromeferry station, about 4.8 miles north-west of the centre. A little further out are Eilean Donan Castle (1.4 miles south-west). Green spaces nearby include Loch Ainm na Gaibhre.
After the work
Regular inspection catches problems early. Specifically:
- Leave barriers in place until fresh joint sealant has cured
- Put movement joints on the planned maintenance inspection round
- Act on the first tear or lifting edge rather than waiting
- Check joints after long freezing spells
Grit is the slow enemy of a joint seal. Stones pressed into the bead by wheels or feet can puncture it, especially on car park decks and warehouse floors. A routine sweep is the simplest protection.
An open joint fills with grit, and a joint full of grit can’t close. The edges then take the pressure and start to spall and the reseal becomes an edge repair as well. A sound seal keeps the joint working.
Bundalloch: questions and answers
Can you work at a site such as Ardelve Industrial Estate, by Bundalloch?
Yes, sites like Ardelve Industrial Estate are within our area, along with the rest of Bundalloch. A few photographs and the unit address let us price the work.
Our building in Bundalloch is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
How do we ask for a quote?
You can use the quote form on this site; alternatively, call 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
What guarantee do you give on joint sealing?
The 12-month guarantee applies to the workmanship. If a joint we sealed fails inside the 12 months, let us know.
Why act early in Bundalloch
Combining joint work with other maintenance reduces set-up costs. Leaking joints need sealing now. We can split the scope into urgent and planned. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Bundalloch before they leak.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why us?
- Work to your specification and the manufacturer’s guidance
- Old sealant cut out, never sealed over
- Clear, fixed quotes
- Work carried out by CSCS-carded applicators
See what affects the cost and our accreditations.
Our process
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Travel to smaller Scottish places like Bundalloch is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take, and flag anything that needs an engineer.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Before we start on site
- Send any specification or drawings in advance
- Share your working hours and any access restrictions
- Flag any permit to work we’ll need
Get a fixed quote
For a fixed quote, speak to us on 01277 525 020 or email the details over. Our quote form is another easy route.