Boughton Aluph expansion joint sealing
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Boughton Aluph and the surrounding area. Send photographs or drawings for a fixed quote.
- Torn sealant in brick or block movement joints
- Chipped joint edges on forklift routes
- Sealant pulling off the joint face
Need expansion joint sealing in Boughton Aluph?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Different surfaces, different methods
Brickwork and blockwork joints
Mortar snots and debris in the joint stop it working. Everything is raked out before backing and sealant go in and flag any joint that seems undersized.
Cladding panel joints
Metal and composite panels shift considerably as temperatures change. The joints need a low-modulus sealant with enough movement capability.
Expansion joint sealing for commercial buildings in Boughton Aluph
Mastic Doctor has sealed movement joints since 2005, for main contractors, FMs, managing agents and building owners. Our applicators are CSCS-carded, we are CHAS accredited and a Constructionline member, and we carry five million pounds of public liability insurance. Each job is backed by a 12-month guarantee on the workmanship. The enquiries we see most involve water getting into the wall through a failed joint and brittle, chalky sealant on external joints, across podiums and floor movement joints, cladding panel joints and blockwork control joints. Looking for mastic applicators who cover Boughton Aluph? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Jobs around smaller places like Boughton Aluph are planned so the whole job is done in one visit. Tell us the joint widths if you can, and what drives or walks over them.
We stand by our work: 12 months, guaranteed. That covers our preparation and application.
- Where
- Boughton Aluph (TN25)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Your questions answered
Do you cover business parks and estates near Boughton Aluph, such as Eurogate Business Park?
Yes. Estates, retail parks and business parks around Boughton Aluph, Eurogate Business Park among them, are all within reach. To start, just call 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Is a smaller place like Boughton Aluph outside your area?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
What will the job cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
Do you reseal car park expansion joints?
Yes. Deck and ramp joints are resealed with a trafficable sealant chosen for the movement with bays phased so the car park keeps operating.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Can the sealant be colour-matched?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Doing it in-house
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Keeping the joints sound
Your facilities or cleaning team can help the joints last. Share these points with them:
- Act on the first tear or lifting edge rather than waiting
- Keep racking legs and heavy point loads off floor joints
- Keep scrapers and ploughs from dragging across joint sealant
- Clear dirt from joint lines during routine cleaning
Every joint we seal is backed by a 12-month guarantee on workmanship. Record which product went into which joints in the building file.
External wall joints that fail let rain into the masonry and cavity. It can surface inside as damp a long way from the joint, well after the seal first opened. Catching it early keeps the water outside.
Our process
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Rural sites near Boughton Aluph may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- Next, we fix a price and confirm the sealant we propose for the movement.
- The failed seal is removed and both faces are cleaned until sound and dry, flagging any broken edges that need repair before sealing.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
What we need from you
- Let us know about inductions and permits
- Tell staff and tenants when we will be in
- Share your working hours and any access restrictions
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to ring 01277 525 020 or email us with what you know.
Read more
What sealant work can’t fix
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Proprietary pre-formed expansion joint systems
- Cracking or settlement that calls for an engineer’s assessment
- Crumbling edges that would give a new bead nothing sound to grip
Not sure which it is? You can call 01277 525 020 or email us and we’ll tell you honestly.
Joints and surfaces we work on
- Car park decks and ramps
- Precast concrete panel joints
- Cladding panel joints
- Podiums and floor movement joints
- Brickwork movement joints
- Blockwork control joints
What we’re called out for in Boughton Aluph
When the movement exceeds the sealant’s capability, the bead tears. A joint that’s too narrow for the movement, or a product with the wrong movement class, will split through the middle. The same product in the same joint tends to fail again unless width and product are reviewed.
These are often picked up first by site or facilities staff:
- Expansion joints filled with dirt and stones
- Joints where the bead has lost adhesion
- Spalled or broken joint edges in floors and decks
- Water dripping through deck or ramp joints
Large sites such as William Harvey Hospital (3.7 miles south of Boughton Aluph) have car parks, service roads and long elevations with movement joints in brick and panels.
What to look for in a quote
- Their approach to joint depth and backing
- Whether old or failed sealant will be cut out, not overlaid
- Whether their applicators hold CSCS cards
- How they’ll work around occupants
Also near Boughton Aluph
Also in Boughton Aluph
Where floor joints take the most wear near Boughton Aluph
Boughton Aluph lies roughly 48 miles out from central London. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift. Boughton Aluph sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint.
For a school such as Wye School, playground and building joints can be done in the holidays. For buildings at a park such as Eurogate Business Park (3 miles south-west of Boughton Aluph), brick and panel movement joints are easy to forget until one leaks.
Boughton Aluph is about 4 miles north-east of Ashford, in Kent. We cover Boughton Aluph, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 931 places across Kent fall within our area, Boughton Aluph among them. For work in that direction, see our London page (48 miles or so).
Business premises anywhere in TN25 are within our area for movement joints. Close to Boughton Aluph, our area also takes in Boughton Corner (1 mile east), Kempe's Corner (1 mile south), Wye (1 mile south-east), Brook (3 miles south-east) and Hassell Street (4 miles east). Further afield, our area takes in Ashford (4 miles south-west), Canterbury (9 miles north-east), Sittingbourne (13 miles north-west), Folkestone (13 miles south-east), Whitstable (12 miles north-east) and Faversham (8 miles north).
Local landmarks in Boughton Aluph
Locally, jobs take us to sites close to Flying Horse Inn, among other places. The nearest railway station is Wye station, roughly 1 mile south-east. Well-known places in the area include William Harvey Hospital (3.7 miles south) and Tower keep castle at Chilham (3.9 miles north-east). Green spaces nearby include Hatch Park.