Expansion joint sealing in Bishopsbourne
Commercial sealant work in Bishopsbourne for contractors, FMs and building owners: expansion and movement joint sealing in walls, decks and floors, with a fixed quote first.
- Debris jammed in movement joints
- Damp inside where a wall movement joint has failed
- Movement joints with split or torn sealant
Expansion joint sealing in Bishopsbourne
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
On site: what to expect
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Rural sites near Bishopsbourne may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Preparing the site
- Let us know about inductions and permits
- For older buildings, check the asbestos register before work
- Point out parking and an unloading spot
Getting a fixed quote
For a fixed quote, call the office on 01277 525 020 or use the quote form. You can also send details through our quote form.
Advice
Expansion joint sealing for commercial buildings in Bishopsbourne
Buildings and slabs are never completely still: temperature, moisture, shrinkage and loading all make materials grow and shrink. Expansion and movement joints are built in so the structure can move without cracking. We seal and reseal movement joints in walls, panels, decks and floors on sites in Bishopsbourne. If you are dealing with joints packed with grit and debris and leaks through car park deck joints onto the level below, we can help, on cladding panel joints, podiums and floor movement joints and car park decks and ramps alike. Looking for mastic applicators who cover Bishopsbourne? We’ve been sealing commercial buildings since 2005.
Halls, schools and small commercial buildings near places like Bishopsbourne have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Bishopsbourne (CT4)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Common problems we fix in Bishopsbourne
Weathering wears down sealant on exposed elevations and decks. UV hardens the surface, and the sealant loses its ability to stretch, so it can’t follow the movement any more.
Look out for the following:
- Hardened, cracked sealant on exposed facades
- Debris jammed in movement joints
- Water dripping through deck or ramp joints
- Expansion joints split through the centre of the bead
For estates staff at a university like University for the Creative Arts, 3.6 miles to the north-west of Bishopsbourne, building and paving joints are part of the planned maintenance list.
What your quote should include
- What level of public liability insurance do they hold?
- Are they CHAS accredited or on Constructionline?
- Will failed sealant be removed rather than covered?
- Their plan for phasing and protecting the area
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Floors, slabs and movement joints in Bishopsbourne
Bishopsbourne is about 56 miles from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors. The 3 miles around Bishopsbourne take in at least three named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
For buildings at a park such as Canterbury Business Park, which lies north-east of Bishopsbourne, brick and panel movement joints are easy to forget until one leaks. Hospitals like Kent and Canterbury Hospital (to the north-west of Bishopsbourne) have multi-storey or surface car parks whose joints carry vehicles round the clock.
Bishopsbourne is about 4 miles south-east of Canterbury, in Kent. Any commercial site in Bishopsbourne is covered, for single jobs and planned programmes alike. Bishopsbourne is one of 931 places we cover in Kent. We also cover London, some 56 miles away.
Commercial sites across CT4 are covered. For a building on The Street, Park Lane and Crows Camp Road or nearby, we can quote for movement joints. If your building is just outside Bishopsbourne, we cover Kingston (1 mile south-east), Bridge (1 mile north), Out Elmstead (1 mile south-east), Marley (1 mile south) and Patrixbourne (2 miles north). Nearby towns on our patch include Ashford (13 miles south-west), Canterbury (4 miles north-west), Margate (15 miles north-east), Dover (10 miles south-east), Folkestone (10 miles south) and Ramsgate (14 miles north-east).
Around Bishopsbourne
We work on buildings around The Mermaid Inn. For rail, the closest station is Bekesbourne station, about 2.2 miles north. Well-known places in the area include Canterbury Castle (4.1 miles north-west) and Kent and Canterbury Hospital (3.2 miles north-west).
Work for main contractors and building owners
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, which keeps the paperwork simple.
Cost factors for movement joints
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- The site’s rules and procedures
- Joint width, depth and condition
- Quantities, in metres or numbers
- Whether old sealant has to be cut out first
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Before you send an enquiry
A few photographs plus some basic facts will normally do. It helps to include:
- The site address and postcode
- A wide shot and a close-up of the area
- When you need the work done
- How the joints are reached, and at what height
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Places near Bishopsbourne
What else we do in Bishopsbourne
Looking after the joints
Once the work is signed off, these steps help:
- Inspect movement joints alongside other routine building checks
- Inspect exposed joints once the cold weather has passed
- Report split or peeling joint sealant early
- Avoid parking heavy plant or pallets on joint lines
Add every elevation, deck and floor joint to your inspection round. A periodic look picks up tears and lifting before water gets in, when they’re still cheap to deal with. Should you spot a problem, you can call 01277 525 020 or use the quote form and send a picture.
When one joint fails, others of the same age are rarely far behind. It pays to check every joint, not just the obvious one so you can prioritise and budget. We will tell you which movement joints need doing now and which can wait.
FAQs: Bishopsbourne
Do you take on work at healthcare sites like Kent and Canterbury Hospital?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Does your area include sites such as Canterbury Business Park, near Bishopsbourne?
Yes, sites like Canterbury Business Park are within our area, along with the rest of Bishopsbourne. Photos and a short description are enough for a first look.
Do you seal on top of existing sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
What hours do you work?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.