Expansion Joint Sealing in Abinger Hammer
Planning work on a movement joint in Abinger Hammer? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Sealant peeling off one face of the joint
- New sealant over old, now failing
- Arrises breaking up along floor joints
Expansion joint sealing in Abinger Hammer
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
After the work
Keep the joints in good shape with a few simple steps:
- Keep racking legs and heavy point loads off floor joints
- Brief car park operatives to protect joint lines during winter clearance
- Look over external and deck joints after a hard winter
- Keep traffic off new joints until the cure time is up
Our workmanship on movement joints carries a 12-month guarantee. Keep the handover details, product and date with your O&M records, so the next reseal starts with the facts.
When one joint fails, others of the same age are rarely far behind. It pays to check every joint, not just the obvious one. We’ll tell you which movement joints need doing now and which can wait.
About our expansion joint sealing in Abinger Hammer
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it, and we will confirm the choice in the quote. We work on car park decks and ramps, blockwork control joints and cladding panel joints, and the usual reasons a site gets in touch are joints where the bead has lost adhesion and spalled or broken joint edges in floors and decks. Searching for sealant specialists in Abinger Hammer? We have been sealing commercial buildings since 2005.
In and around smaller places like Abinger Hammer, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Abinger Hammer (RH5)
- Region
- Surrey
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What happens if it’s left?
Sealing over a failed movement joint is a common shortcut. A bead over the old seal can’t bond or flex, so it fails quickly. We cut out the old seal and prepare the faces every time. One visit to deal with every failing joint makes more sense than several trips to a place like Abinger Hammer. Send photos of each area and we’ll quote for the lot.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
What you get with us
- Clear, fixed quotes
- A Constructionline member, so easy to vet
- Commercial sealant work since 2005
- Fully insured
Expansion joint sealing around Abinger Hammer: how the place shapes the job
Rainfall across the South East, Abinger Hammer included, is lower than in many parts of the UK. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open. Central London is about 24 miles from Abinger Hammer. The South East has large numbers of industrial estates and warehouses along the motorway corridors, and their floor joints take forklift and pallet-truck traffic all day.
For an estate such as St. Luke’s Hospital (5.7 miles west of Abinger Hammer), the joints in ramps, decks and long building elevations all need attention over time.
Abinger Hammer is about 5 miles west of Dorking, in Surrey. If you are looking for expansion joint sealing in Abinger Hammer, we can help. We work across 379 places in Surrey, large and small. London is covered too, around 24 miles from Abinger Hammer.
Anyone looking for expansion joint sealing in RH5 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Guildford Road, Hackhurst Lane and Felday Road, and sites on any of them can send details for a fixed quote. Sites close to Abinger Hammer are covered too, including Gomshall (1 mile west), Hoe (1 mile south), Sutton Abinger (1 mile south), Abinger (1 mile south-east) and Shere (1 mile west). Further afield, our area takes in Guildford (6 miles west), Woking (9 miles north-west), Camberley (15 miles north-west), Epsom (11 miles north-east), Horley (12 miles east) and Redhill (12 miles east).
Around Abinger Hammer
Recent enquiries here include premises near Abinger Arms and Colekitchen Down. Abinger Hammer’s nearest station is Gomshall station, roughly 0.5 miles north-west. Nearby you’ll also find St. Luke’s Hospital (5.7 miles west) and Shere Museum (1.3 miles west). For a walk, there’s Leith Hill and Combe Bottom.
Questions we’re asked in Abinger Hammer
Is hospital work, at somewhere like St. Luke’s Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is Abinger Hammer too small for you to travel to?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What if the joint edges are damaged?
Sealant needs sound faces to bond to, so broken or crumbling edges have to be repaired first. Where it’s visible beforehand, we will say so when we quote.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we will ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Can the sealant be colour-matched?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
Can weather delay the job?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
From enquiry to sign-off
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access, and our waste is bagged and taken away as we go. If others near Abinger Hammer need work, visits can be combined. You’ll have a fixed quote before work starts.
- We assess the joints on site or from photos, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
What we need from you
- Have the specification and drawings to hand
- Tell us which areas need to stay in use
- Let us know about inductions and permits
Ask for a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Read more
What we can’t put right
Honesty saves time and money. New sealant won’t cure:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Changing the joint layout or spacing of a structure
- Damaged metal nosings or cover plates over a joint
Not sure which it is? You can give us a call on 01277 525 020 or email the details over and we’ll tell you honestly before you book.
Where we work in Abinger Hammer
- Podiums and floor movement joints
- Brickwork movement joints
- Car park decks and ramps
- Precast concrete panel joints
- Cladding panel joints
- Blockwork control joints
Common problems we fix in Abinger Hammer
When the movement exceeds the sealant’s capability, the bead tears. A joint that’s too narrow for the movement, or a product with the wrong movement class, will split through the middle. Resealing like for like often fails the same way.
Site and facilities staff are often the first to spot these:
- Movement joints with split or torn sealant
- Joints packed with grit and debris
- New sealant over old, now failing
- Hardened, cracked sealant on exposed facades
For floors and slabs around Abinger Hammer, the product is chosen for the traffic and the movement at each joint.
Before you book anyone
- Do they follow the manufacturer’s priming guidance?
- Can the work be phased to keep areas open?
- What level of public liability insurance do they hold?
- What site paperwork they can supply
Towns and villages near Abinger Hammer
More services for Abinger Hammer
Should maintenance staff do it?
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.