Construction Mastic in Peel Common
Sealant work in Peel Common for main contractors, managing agents and facilities managers: mastic packages for new-build and refurbishment projects, quoted at a fixed price.
- Window and door perimeters that won’t pass inspection
- Internal caulk splitting as the building dries out
- Oversized or tapered gaps around new frames
Construction mastic for businesses in Peel Common
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Construction mastic in Peel Common, done properly
A typical mastic package covers more than window perimeters: frame perimeters inside and out, caulking to trims and boards where the specification calls for it, sanitary silicone, kitchens, and the final snag list. Splitting those between trades often leaves gaps in responsibility, and one applicator team gives a consistent finish. If you’re dealing with snag items on joints that need redoing before handover and perimeter gaps outside the sealant’s range, we can help, whatever the surface. One point of contact handles commercial sealant work in Peel Common from the first photographs to the final walk-round, whether it’s one building or several.
For a site near Peel Common, the mastic visit is planned so the right sealants, primers and backing rod are on hand. Send drawings or photos and the programme and we’ll quote to suit.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Peel Common (PO14)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Our process
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work usually takes whatever the programme allows, since the work follows the trades as areas are released. Rural sites near Peel Common may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- We walk the site or review drawings to understand the package.
- A fixed quote sets out scope, products and phasing.
- Site paperwork is confirmed and our CSCS-carded applicators are inducted.
- Sealing follows the programme as areas are released.
- Any frame gaps or issues outside our scope are flagged to the site team.
- Final snagging is completed and the 12-month guarantee applies.
Preparing the site
- Send any specification or drawings in advance
- Tell staff and tenants when we will be in
- Point out parking and an unloading spot
Get a fixed quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or email us.
Related advice
Also near Peel Common
More services for Peel Common
Leave it or put it right?
Refurbishments sometimes budget for new windows when the frames are sound and only the seal has failed. If the frame is in good order, cutting out and resealing the perimeter can be all it needs and that’s a far smaller job. If the frame is life-expired, we’ll tell you. Halls, stores and units around places like Peel Common may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why appoint us
- Health and safety: CHAS accredited
- Fully insured
- Constructionline member for supplier checks
- Colour options checked against the specified product
See how commercial sealant jobs are priced and our accreditations and insurance.
Questions we’re asked in Peel Common
Can you work on a hospital site such as Gosport War Memorial Hospital?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Does the sea air around Peel Common change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Are you CHAS accredited?
Our applicators hold CSCS cards, and we’re CHAS accredited and a Constructionline member. We’re also fully insured, with five million pounds of public liability cover.
How long does a job like this take?
It depends on the scope, though a typical visit normally takes anything from a day of snagging to several weeks of plot-by-plot sealing on a phased scheme. For bigger or phased jobs, we will set out a timescale with the quote.
What does a mastic package normally include?
Inside and out: frame perimeters, movement joints, caulk where called for, sanitary and kitchens, all priced as one package.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
What sealant work can’t fix
We check first that sealant really is the fix. It won’t put right:
- Glazing units that are cracked or misted
- Designing joint widths or choosing the specification (that sits with the designer)
- Frame gaps too wide for sealant, which the installer needs to correct
If you are not sure, just ring 01277 525 020 or email a schedule or drawings and we will give you a straight answer before you book.
What we seal
- Sanitary and kitchen joints
- Window and door perimeters
- Internal decorators’ caulk
- Floor and skirting junctions
- Cladding and panel joints
- Brick and block movement joints
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Different surfaces, different methods
Kitchens and utility areas
Kitchen joints are sealed after fitting and before final clean. The sealant is a kitchen-grade product.
Bathrooms, en suites and washrooms
Across a block of flats or a hotel, sanitary sealing is repeated in every room. One applicator team gives the same finish everywhere.
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Note which sealant went where at handover
- Allow flexibility for external sealing in damp or cold weather
- Use the product the specification names
- Check frame gaps are within the sealant’s range before sealing
Brief the sparkle clean so they don’t scrape the new joints. Blades and abrasive pads are the commonest cause of damage at the final clean.
Oversized gaps are a problem better caught early. Sealant stretched over an oversized gap won’t last. We raise them during our first walk of the area.
Construction mastic in Peel Common: the local picture
With the shore within about 2 miles, Peel Common counts as a coastal location. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so joint design, primers and product choice deserve extra care. Rainfall across the South East, Peel Common included, is lower than in many parts of the UK. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, so the external programme keeps a little slack.
Building work at universities like University of Portsmouth - North Zone, 4.4 miles to the south-east of Peel Common, is often timed for the summer, mastic included. When a college such as Fareham College, 1.9 miles to the north of Peel Common, builds or refurbishes, the mastic package typically has to fit around students and staff. New units and refits on sites such as Speedfields Retail Park, 0.8 miles to the north of Peel Common, need their panel and perimeter joints sealed to the specification.
Peel Common is about 2 miles south of Fareham, in Hampshire. Any commercial site in Peel Common is covered, whether it’s a single job or part of a planned programme. Our Hampshire coverage takes in 723 places, from busy centres to rural villages.
We cover the PO14 postcode districts. Buildings on Woodcote Lane and Newgate Lane are within our area. Just outside Peel Common, we also work in Crofton (1 mile west), Rowner (1 mile east), Bridgemary (1 mile east), Lee-on-the-Solent (1 mile south) and Elson (2 miles east). Nearby towns on our patch include Havant (9 miles east), Eastleigh (12 miles north-west), Horndean (10 miles north-east), Totton (15 miles north-west), Chandler's Ford (14 miles north-west) and Hedge End (8 miles north-west).
Around Peel Common
Locally, jobs take us to sites close to Bridgemary School and Baycroft School. For rail, the closest station is Fareham station, roughly 2 miles north of the centre. Nearby you will also find Fareham Shopping Centre (2.1 miles north) and Gosport War Memorial Hospital (2.8 miles south-east). For a walk, there’s West of the River Alver and Portsdown Hill.