The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Construction Mastic in Nether Wallop

Planning work on a mastic package in Nether Wallop? We assess it, carry out the work and guarantee our workmanship for 12 months.

  • Snag items on joints that need redoing before handover
  • Inconsistent sealant finishes from plot to plot
  • Frame perimeters left unsealed or poorly sealed
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
Scope agreed and priced before anything starts.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
CHAS & Constructionline
£5m public liability

Construction mastic near Nether Wallop

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Construction mastic for commercial buildings in Nether Wallop

On refurbishments, the mastic package typically includes cutting out old sealant as well as sealing new work. Old beads come out completely, as fresh silicone can’t grip old, and on older buildings we ask for the asbestos survey before disturbing anything. New and existing joints then get the same preparation. The enquiries we see most involve frame gaps too wide for sealant alone and bath and shower joints scraped during the final clean, on cladding and panel joints, floor and skirting junctions and brick and block movement joints. For commercial sealant work in Nether Wallop, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.

Around smaller places like Nether Wallop, building work typically means conversions of farm buildings, a few new houses or an extension to a hall or school. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.

What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.

Where
Nether Wallop (SO20)
Wider area
Hampshire
Guarantee
12 months on every job
Quote
A fixed quote before we start
Telephone
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

General trades versus a specialist

Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.

For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.

What we’re called out for in Nether Wallop

Frames installed with uneven gaps make perimeter sealing harder. Every product has limits on how wide a joint it can bridge and gaps beyond it need packing or adjusting by the frame installer. We flag them early rather than filling them with sealant that won’t last.

Common reasons buildings call us in:

  • Window and door perimeters that won’t pass inspection
  • Caulk cracking where joints are moving more than expected
  • Different trades sealing to different standards
  • Snag items on joints that need redoing before handover

Hotels like Fifehead Manor Hotel, 1.2 miles to the north-west of Nether Wallop, rarely close for long, so refurbishment mastic is phased floor by floor.

What your quote should include

  • Which product they’ll use, and why it suits the joint
  • What site paperwork they can supply
  • Is depth set with backing rod, or bond-breaker tape in shallow joints?
  • Whether old or failed sealant will be cut out, not overlaid

How to choose a sealant contractor

Construction mastic around Nether Wallop: points for this area

The South East is one of the drier parts of the UK. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, so we time external mastic for dry faces and agree it with the site team. Nether Wallop lies roughly 69 miles out from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, and each scheme needs its mastic sealed to programme.

When a school such as Wallop Primary School is extended or refurbished, the mastic package is often squeezed into the holidays.

Nether Wallop is about 7 miles south-west of Andover, in Hampshire. Our applicators travel to Nether Wallop for work on mastic packages, handled exactly as we handle every other area. Nether Wallop is one of 723 places in Hampshire on our list. For work in that direction, see our Southampton page.

We take on mastic packages across the SO20 postcode area, whatever the building. Streets here include Church Road, High Street and Church Hill, and sites on any of them can send details for a fixed quote. Just outside Nether Wallop, we also work in Middle Wallop (1 mile north-west), Over Wallop (2 miles north-west), Kentsboro (2 miles north), Red Rice (4 miles north-east) and Fox (4 miles north). A short drive away, we cover Winchester (12 miles south-east), Eastleigh (15 miles south-east), Andover (7 miles north-east), Totton (15 miles south), Chandler's Ford (13 miles south-east) and Romsey (10 miles south).

Near you in Nether Wallop

Locally, jobs take us to sites close to The Old Butchers Arms and the streets around them. For rail, the closest station is Grateley station, roughly 3.8 miles north-west of the centre. For a walk, there’s Boscombe Down East.

Map of Nether Wallop © OpenStreetMap contributors

FAQs: Nether Wallop

Is a smaller place like Nether Wallop outside your area?

No. Places such as Nether Wallop are covered as much as the big towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.

Can the mastic package for our job in Nether Wallop follow the site programme?

Yes. Send the programme and drawings, and we will plan the mastic to suit the stages. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.

How many days will you need on site?

We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.

Is colour matching possible?

Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.

Can fire-rated sealing at service penetrations be included?

Fire-rated sealing at service penetrations and linear gaps can be included where specified. Record requirements are confirmed at quote stage.

What’s the quickest route to a quote?

The quote form is the simplest route, though you can also speak to us on 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.

Do you use the sealant named in the specification?

We use the product the specification names. Any suggested alternative is put to you before anything changes.

Looking after the joints

A few simple habits keep the new joints working:

  • Keep finished joints away from paint, plaster and scrapers
  • Don’t schedule sealing before decorators and flooring are done
  • Don’t force external sealing on a damp or frosty day
  • Ask for joint and product checks before the package is urgent

After we’ve sealed an area, it helps to keep other trades from damaging the joints. Fresh sealant needs its cure time before it’s cleaned, painted near or knocked; we confirm the time for each product.

In wet areas, a weak sanitary joint shows up quickly once the building is occupied. Leaks behind showers and basins damage finishes and floors, and the repair falls into the defects period. Getting the product and preparation right first time avoids that.

Our process

We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. If others near Nether Wallop need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.

  1. Drawings, specification and programme come to us.
  2. We take off quantities and return a fixed quote.
  3. We agree with the site team which areas come first.
  4. Plots or floors are sealed as they’re handed over.
  5. Every joint is cleaned, set to depth and sealed with the specified product.
  6. Snags are cleared and the package signed off with our 12-month guarantee.

Before we start on site

  • For older buildings, check the asbestos register before work
  • Clear stock, furniture or equipment away from the joints
  • Arrange parking or a loading space

Getting a fixed quote

We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, give us a call on 01277 525 020 or use the quote form.

Get a price

Related advice

What happens if it’s left?

A quick bead over a damaged joint can get an area past inspection, but it won’t last. Sealant can’t grip a contaminated or existing bead. We cut out and redo the joint properly. Older rural buildings around Nether Wallop move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.

A quote for mastic packages depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.

Why choose Mastic Doctor in Nether Wallop

  • Workmanship guaranteed for 12 months
  • One phone line for London, the South East and Scotland
  • Specification-led, product-correct work
  • Over 20 years of commercial sealing

Read what affects the cost and how we’re accredited.

Surface by surface

External facade and movement joints

Movement joints in the facade are sealed with a product suited to the expected movement. Depth is controlled with backing rod so the bead bonds to two sides only.

Bathrooms, en suites and washrooms

In bathrooms and washrooms, an anti-mould sanitary silicone goes around every fitting. Each joint is prepared, sealed and finished with a neat tooled line and baths are loaded where appropriate before sealing.

Accreditations

Trusted. Accredited. Insured.