The Mastic Doctor team standing beside their branded vans outside an office building
Moray · Scotland

Fochabers construction mastic

Mastic packages for new-build and refurbishment projects throughout Fochabers and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.

  • Early adhesion failures on new external joints
  • A long mastic snag list close to completion
  • Failed sealant in an existing building being refurbished
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Signed off, with 12 months’ guarantee.
South East, London & Scotland
CHAS accredited
£5m public liability

Construction mastic near Fochabers

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

About our construction mastic in Fochabers

Getting a subcontractor through site induction should be simple. We’re a Constructionline member and CHAS accredited, and every applicator holds a CSCS card, and we are fully insured. RAMS, an insurance certificate and CSCS details can be confirmed with the quote if you tell us what you need. We work on brick and block movement joints, sanitary and kitchen joints and floor and skirting junctions, and what we are called in for most is existing joints on a refurb that need cutting out and resealing and missed perimeter joints on a new elevation. One point of contact handles commercial sealant work in Fochabers from the first photos to the final walk-round, for single jobs and planned programmes alike.

Construction around smaller Scottish places like Fochabers is often one-off schemes: a school, a health centre, a hotel extension or a few houses. Exposed elevations in Scotland put facade and perimeter joints to work from day one, so the sealant choice matters.

Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.

The Mastic Doctor team standing beside their branded vans outside an office building
Where
Fochabers (IV32)
Region
Moray
Cover
12 months on our workmanship
Price
A fixed quote before we start
Telephone
01277 525 020
Updated
3 November 2026

Site staff or a sealant specialist?

Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

Facades, frames and programmes in Fochabers

Building work in Fochabers comes under the Building (Scotland) Regulations 2004 and their technical handbooks, with warrants from the local authority verifier. We seal to the specification that sits behind the warrant. Fochabers is on Scotland’s drier eastern side. Frosty spells still affect external mastic dates. External dates keep a little give.

For a contractor at a hotel such as Grant Arms Hotel, which lies north-east of Fochabers, the mastic often has to be finished before a reopening date. Projects at schools like Milne's High School work to term dates, so mastic is programmed tightly. Hospital estates such as Seafield Hospital, 5.8 miles north-east of Fochabers, tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan.

Fochabers is about 6 miles south-west of Buckie, in Moray. Businesses, contractors and managing agents in Fochabers can call on us for mastic packages. Fochabers is one of 59 places we cover in Moray for mastic packages. Sites around Aberdeen have their own page, about 48 miles away.

If you need construction mastic in IV32, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include High Street, The Square and Christie Place. Just outside Fochabers, we also work in Mosstodloch (1 mile north-west), Bogmoor (3 miles north), Upper Dallachy (3 miles north), Nether Dallachy (3 miles north) and Garmouth (4 miles north). Further afield, our area takes in Elgin (8 miles west), Buckie (6 miles north-east), Lossiemouth (10 miles north-west), Keith (7 miles south-east), Ashgrove (8 miles west) and Portknockie (11 miles north-east). As one of the bigger centres in Moray, Fochabers has a broad mix of commercial, public and industrial buildings, and we cover them all. Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.

Around Fochabers

Nearby you will also find Gordon Castle (0.7 miles north-east) and Seafield Hospital (5.8 miles north-east). Open spaces near Fochabers include The Lake and Findlay's Seat.

Map of Fochabers © OpenStreetMap contributors

Diagnose, treat, sign off

Site rules come first: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Travel to smaller Scottish places like Fochabers is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. External joints need a dry spell as well.

  1. We price from the drawings, specification and programme you send.
  2. A fixed quote sets out the scope, the products and the sequence.
  3. You tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we confirm it with the quote.
  4. We seal each plot or floor as it’s released to us.
  5. Joints are cleaned, primed where the maker requires it, backed and sealed to the specification.
  6. Snags are cleared before handover and completed areas carry our 12-month guarantee.

Before we start on site

  • Share your working hours and any access restrictions
  • Tell us what induction or permit system the site runs
  • Point out any areas we must not close

Getting a fixed quote

Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.

Get a quick quote

Advice

Quoting for work in Fochabers

We price every job individually. The main factors are:

  • Site requirements such as inductions and permits
  • The total length or number of joints
  • Removal of failed or old sealant
  • Whether the work must be split into stages

Pricing mastic packages depends on quantities, condition and access, plus any specification you are working to. Call for a quote.

Before you send an enquiry

There’s no need for a formal survey. A few details are enough to get going:

  • Whether the building will be occupied during the work
  • Access details, including height
  • Approximate linear metres or a joint schedule
  • When you need the work done

Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, speak to us on 01277 525 020 or email a schedule or drawings.

Why it’s worth doing now in Fochabers

Sealing over damaged or contaminated new joints might save a day, but it won’t last. Sealant can’t grip a contaminated or existing bead and the defect reappears in the defects period. Damaged joints are removed and resealed from clean faces. Renewing every failing joint on one visit is the sensible approach for a place like Fochabers. Send photographs and we’ll quote for everything together.

The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.

Why clients in Fochabers choose us

  • Colours confirmed for the specified product
  • Health and safety: CHAS accredited
  • Public liability insurance in place
  • Our applicators hold CSCS cards

See our cost guide and how we’re accredited.

Aftercare for building managers

Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:

  • Use the product the specification names
  • Get the mastic subcontractor involved early in the programme
  • Keep product details for future maintenance
  • Don’t schedule sealing before decorators and flooring are done

Once an area is sealed, protect it from following trades. Fresh sealant needs its cure time before it’s cleaned, painted near or knocked.

Leaving the mastic snag list to the end squeezes everyone. Clearing snags area by area spreads the work out and keeps handover on track.

What sealant work can’t fix

Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be one of these:

  • Designing joint widths or choosing the specification (that sits with the designer)
  • Rework caused by others damaging completed areas
  • Faulty frames rather than failed sealant

If you’re not sure, just phone 01277 525 020 or use the quote form and we will give you a straight answer.

What we seal

  • Internal decorators’ caulk
  • Floor and skirting junctions
  • Brick and block movement joints
  • Window and door perimeters
  • Cladding and panel joints
  • Sanitary and kitchen joints

Questions we’re asked in Fochabers

Is Fochabers off your patch?

Not at all. Fochabers is within our area. We cover the whole of Scotland. Good photographs up front let us bring everything on the first visit.

Is hospital work, at somewhere like Seafield Hospital, something you do?

Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.

How do you work with the site programme?

The programme sets the job. Tell us the sequence and we’ll plan applicators around it so sealing follows the trades.

Will you stick to the specified products?

We follow the specified sealant and flag anything that doesn’t look right for the joint. Specifications often reference BS EN 15651 or BS 6213.

Is it fine to apply new sealant on top of old?

No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.

Do you take on small jobs?

Small jobs are welcome alongside larger packages. Photos and a description are enough to start.

Can weather delay the job?

It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

Accreditations

Trusted. Accredited. Insured.