Construction and new-build mastic in Drellingore, Kent
Construction mastic in Drellingore, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Mastic snags holding up handover
- New external sealant already peeling away
- Oversized or tapered gaps around new frames
Construction mastic in Drellingore
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle construction mastic in Drellingore
Mastic tends to be one of the final packages before handover, so it lands at exactly the point the programme is tightest. Mastic Doctor takes on mastic packages for main contractors and developers with projects in Drellingore. We work on cladding and panel joints, window and door perimeters and brick and block movement joints, and what we are called in for most is new external sealant already peeling away and perimeter gaps outside the sealant’s range. A single leaking joint is often how a building in Drellingore first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around smaller places like Drellingore, building work usually means conversions of farm buildings, a few new houses or an extension to a hall or school. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Drellingore (CT18, CT15)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Different surfaces, different methods
Kitchens and utility areas
On commercial kitchen fit-outs, hygienic sealants are often specified. Joints are sealed smooth so they’re easy to clean.
Snagging before handover
Snagging is often the final mastic stage. Snags are cleared room by room, cutting out damaged joints and resealing them properly.
Nearby places to Drellingore
Also in Drellingore
Your questions answered
Is Drellingore too small for you to travel to?
No. Places such as Drellingore are covered as much as the big towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Does the sea air around Drellingore change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
How much does the work cost?
There isn’t a price list, because every site is different. Send photos or drawings and we will price it at a fixed figure.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, with one point of contact.
Is colour matching possible?
It depends on the product specified. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Can you work plot by plot or floor by floor?
We seal plot by plot or floor by floor as areas are released. The sequence is settled with your site team and adjusted as things change.
Common problems we fix in Drellingore
Dust is the enemy of adhesion on a construction site. Dust, film adhesive, damp and grease on the joint faces prevent a proper bond so faces get cleaned, and primer goes on wherever the maker specifies, even on new work.
Typical triggers for a call:
- Internal caulk splitting as the building dries out
- Early adhesion failures on new external joints
- Sanitary sealant damaged by following trades
- Missed perimeter joints on a new elevation
For a contractor working at a hospital such as Royal Victoria Hospital, 2.9 miles south-west of Drellingore, perimeter and facade sealing is planned around patients and deliveries.
Before you book anyone
- Who will actually carry out the work
- Can the work be phased to keep areas open?
- What site paperwork they can supply
- What the guarantee covers, and for how long
Our process
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. If others near Drellingore need work, visits can be combined. A fixed quote is given before anything starts.
- Drawings, the sealant specification and your programme come to us for pricing.
- We return a fixed quote that ties the mastic package to your programme.
- You tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we confirm it with the quote.
- We seal each plot or floor as it’s released to us.
- Joints are cleaned, primed where the maker requires it, backed and sealed to the specification.
- Snags are cleared before handover and completed areas carry our 12-month guarantee.
What we need from you
- Arrange parking or a loading space
- Tell us which areas need to stay in use
- Send your site hours and access windows
Ask for a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, call the office on 01277 525 020 or email the details over.
Related advice
Maintenance after handover
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Stick to the specified sealant rather than a generic substitute
- Plan external elevations with the weather in mind
- Brief the final clean team to avoid blades near sealant
- Note which sealant went where at handover
Any damage after we have finished should go on the snag list right away. We can return to clear snags before handover as agreed in the quote.
Sealing outside when the joint is damp or too cold leads to poor adhesion. Holding off until conditions suit avoids callbacks.
Mastic packages on Drellingore sites
Drellingore is within about 2 miles of the coast. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, so joint design, primers and product choice deserve extra care. Rainfall across the South East, Drellingore included, is lower than in many parts of the UK. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so the external programme keeps a little slack.
Older buildings in the area around Drellingore, such as Acrise Place, 3 miles west of Drellingore, need care when sealed: the product has to suit soft or historic materials. University estates such as University Centre Folkestone (3 miles south of Drellingore) tend to have a rolling programme of new buildings and refurbishments, each with window perimeters and facade joints to seal.
Drellingore is about 2 miles east of Hawkinge, in Kent. We send applicators to Drellingore for mastic packages, handled exactly as we handle every other area. Drellingore is one of 931 places we cover in Kent for mastic packages. Brighton is covered too, around 61 miles from Drellingore.
Postcode districts covered here: CT18 and CT15. We also cover South Alkham (1 mile north-east), Alkham (1 mile north-east), Satmar (1 mile south-east), Chalksole Green (1 mile north-east) and Capel-le-Ferne (2 miles south) for mastic packages. Nearby towns on our patch include Ashford (15 miles west), Canterbury (12 miles north-west), Dover (4 miles east), Folkestone (3 miles south-west), Deal (11 miles north-east) and Hythe (6 miles south-west).
Near you in Drellingore
Recent enquiries here include premises near Sladden Wood, among other places. For rail, the closest station is Folkestone Central station, roughly 3.1 miles south-west. Well-known places in the area include Royal Victoria Hospital (2.9 miles south-west) and Folkestone Museum (3.1 miles south). Green spaces nearby include Sugar Loaf Hill and Dover Western Heights.
General trades versus a specialist
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
How the quote is worked out
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Location, for remote and island sites
- How accessible the joints are
- Quantities, in metres or numbers
- Which sealant the job calls for
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- Your programme or deadline
- Specification clauses that apply
- Approximate linear metres or a joint schedule
- Whether an asbestos survey exists
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, phone 01277 525 020 or email us.