Construction Mastic in Arpinge
Looking for construction mastic in Arpinge? It’s simple: send details, get a quote, we seal, guaranteed.
- Perimeter gaps outside the sealant’s range
- Different trades sealing to different standards
- Failed sealant in an existing building being refurbished
Construction mastic near Arpinge
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
For managing agents and facilities managers
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
How we handle construction mastic in Arpinge
External mastic depends on the weather in a way most internal trades don’t. Cold or damp mornings, frost and condensation on frames can all hold external sealing up so it helps to sequence elevations with some flexibility. Internal areas can typically carry on while the outside waits. We work on floor and skirting junctions, cladding and panel joints and sanitary and kitchen joints, and what we’re called in for most is bath and shower joints scraped during the final clean and cracks opening in caulked internal joints. A specialist sealant contractor works differently from a general builder: on jobs in Arpinge, preparation and product choice get the time they need.
Construction in and around smaller places such as Arpinge is often barn conversions, small groups of houses or extensions to halls and schools. Each still needs a proper mastic package: window perimeters, facade joints and internal sealant to the specification.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Arpinge (CT18)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
How the quote is worked out
The price varies from site to site. It mainly depends on:
- Travel to remote or island sites
- Which sealant the job calls for
- Site requirements such as inductions and permits
- Any access equipment needed
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What we need to price the job
To price the job accurately, we need a clear picture of the site. Send us:
- Rough lengths or quantities, or drawings if you have them
- Whether the building will be occupied during the work
- Any specification or named product
- Asbestos survey details if the building is older
To get a fixed quote, speak to us on 01277 525 020 or send photos by email. You can also send details through our quote form.
Nearby places to Arpinge
Other services in Arpinge
Building and refurbishing in Arpinge
Arpinge sits close to the coast, within about 2 miles. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so joint design, primers and product choice deserve extra care. Central London is about 60 miles from Arpinge. Building activity in the commuter belt runs from new flats near stations to business park refurbishments, and main contractors there need mastic that keeps to the programme.
Building work at universities like University Centre Folkestone, 2.8 miles to the south-east of Arpinge, is often timed for the summer, mastic included. When a college such as Folkestone College (2.2 miles south-east of Arpinge) builds or refurbishes, the mastic package typically has to fit around students and staff. For contractors at a school such as Harcourt Primary School, sealing has to be finished before term starts.
Arpinge is about 1 mile south-west of Hawkinge, in Kent. We cover commercial sites throughout Arpinge, whether it’s a single job or part of a planned programme. Across Kent, 931 places are covered, Arpinge among them. For work in that direction, see our Brighton page, about 58 miles away.
We cover the CT18 postcode districts for mastic packages. Just outside Arpinge, we also work in Hawkinge (1 mile north-east), Densole (2 miles north-east), Old Hawkinge (2 miles east), Swingfield Minnis (3 miles north-east) and Elham (3 miles north). Bigger towns within reach include Ashford (12 miles west), Canterbury (12 miles north), Dover (8 miles east), Deal (14 miles north-east), Hythe (3 miles south-west) and Tower Hamlets (7 miles east).
Near you in Arpinge
In Arpinge, that means premises near The Cat & Custard Pot pub and the streets around them. For rail, the closest station is Folkestone West station, roughly 1.7 miles south-east. Well-known places in the area include Royal Victoria Hospital (2.2 miles south-east) and Folkestone Castle (1.4 miles south-east). Open spaces near Arpinge include Cheriton Hill.
How the job changes by surface
Bathrooms, en suites and washrooms
In bathrooms and washrooms, an anti-mould sanitary silicone goes around every fitting. Joints are cleaned, sealed and tooled neatly.
Window and door perimeters
Gaps around frames have to be within the sealant’s range. We check them during the first walk-round and flag any that need packing or adjusting before sealing starts.
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Damage to finishes by other trades after we’ve sealed
- Fire-stopping design or sign-off (that’s for the designer, fire engineer and building control)
- Joint design decisions that belong to the architect or engineer
If you’re not sure, just give us a call on 01277 525 020 or email the details over and we’ll give you a straight answer.
Joints and surfaces we work on
- Cladding and panel joints
- Brick and block movement joints
- Floor and skirting junctions
- Window and door perimeters
- Internal decorators’ caulk
- Sanitary and kitchen joints
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Release areas for mastic once other trades have finished in them
- Ask cleaners to use soft cloths around fresh sealant
- Flag uneven or tapered frame gaps early
- Plan external elevations with the weather in mind
Tell the builders’ clean team which areas have new sealant. Blades and abrasive pads are the commonest cause of damage at the final clean so keep them off the joints.
A missed perimeter seal on one window can wet the reveal and the plaster inside. That usually means redoing finishes in a completed area. A check of every frame before decorators start is worth the time.
Arpinge: questions and answers
Is Arpinge too far out for you?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Does your area include sites such as Concept Court Business Park, near Arpinge?
Yes, sites like Concept Court Business Park are within our area, along with the rest of Arpinge. A few photos and the unit address let us price the work.
Do your applicators hold CSCS cards?
Our applicators hold CSCS cards, and we’re CHAS accredited and a Constructionline member. Public liability insurance of five million pounds is in place too.
Can you fit around our programme?
We follow the trades through the building. Areas are sealed as they’re released by the site team, and we will raise anything that holds the work up.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For work around Arpinge, we aim to finish in one visit, so photographs and measurements up front really help. That way the right products come on the day.
- First we look at the scope on site or from drawings.
- You receive a fixed quote covering scope, products and sequence.
- Paperwork is agreed and applicators are inducted on site.
- We seal plot by plot or floor by floor in line with the programme.
- Any frame gaps or issues outside our scope are flagged to the site team.
- The package is closed out, snags cleared and backed by our 12-month guarantee.
Getting the site ready
- Point out any areas we must not close
- Confirm the product named in the specification
- Tell us your opening times and when work is allowed
Get a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or email a schedule or drawings.