Mastic contractors in Arinagour
Commercial sealant work in Arinagour for contractors, FMs and building owners: mastic packages for new-build and refurbishment projects, with a fixed quote first.
- Sealant knocked or painted over by other trades
- Failed sealant in an existing building being refurbished
- A mastic package split between trades with no clear owner
Construction mastic across Arinagour
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our construction mastic in Arinagour
Buyers, tenants and clients notice sealant lines long before they notice the structure. Untidy or missed joints are among the commonest snag items. Our aim is joints that pass at the first inspection. We work on cladding and panel joints, window and door perimeters and floor and skirting junctions, and the failures we’re asked to look at most are existing joints on a refurb that need cutting out and resealing and missed perimeter joints on a new elevation. A single leaking joint is often how a building in Arinagour first comes to us: we look at the rest while we are there and tell you what we find.
In smaller places such as Arinagour, building work tends to be single schemes rather than big developments. The mastic still needs to suit exposed elevations and Scottish weather.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Where
- Arinagour (PA78)
- Region
- Argyll and Bute
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes as long as the agreed sequence needs, which comes down to joint lengths, access and handover dates, and our waste is bagged and taken away as we go. Tell us who will meet us and how to get in at your building near Arinagour. We’ll confirm the plan with the fixed quote.
- First we look at the scope on site or from drawings.
- You receive a fixed quote covering scope, products and sequence.
- Site paperwork is confirmed and our CSCS-carded applicators are inducted.
- Sealing follows the programme as areas are released.
- Problems we find, such as oversized gaps, are raised right away.
- Final snagging is completed and the 12-month guarantee applies.
Before we start on site
- Make sure the joints can be reached
- Let building users know which areas are affected
- Send asbestos survey details if the building is pre-2000
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or email drawings and photos.
Advice
Also in Arinagour
Mastic packages on Arinagour sites
Arinagour is within about 1 mile of the coast. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so we check the specified product suits the exposure before the first bead. Arinagour is in the west of Scotland, the wetter side of the country. External mastic dates are agreed with the site manager, with internal sealant kept ready for wet days.
For a contractor at a hotel such as Coll Hotel, which lies north of Arinagour, the mastic often has to be finished before a reopening date.
Arinagour is in Argyll and Bute. If you’re looking for construction mastic in Arinagour, we can help, as we do across Argyll and Bute. We work across 124 places in Argyll and Bute, large and small.
Postcode districts covered here: PA78 for mastic packages. For a building on Main Street, Carnan Road and Shore Street or nearby, we can quote for mastic packages. Nearby places we also cover include Scarinish (13 miles south-west), Ballygown (15 miles south-east), Crossapol (16 miles south-west), Kilchoan (17 miles east) and Tobermory (17 miles east) for mastic packages. For island and remote sites, travel and materials need planning ahead.
Near you in Arinagour
Other landmarks nearby include Old Breachacha Castle (4.4 miles south-west). Not far away are Loch Airidh Meall Bhreide.
Your questions answered
Is Arinagour too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Does the sea air around Arinagour change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. We check the specified product suits the exposure and pay close attention to preparation.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we’ll confirm the curing time on the day.
Do you take on mastic snagging only?
Yes. Share the list and photos, and a fixed quote follows.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Do your applicators hold CSCS cards?
CHAS and Constructionline are both in place, and our applicators hold CSCS cards. We’re fully insured for public liability.
Looking after the joints
Regular inspection catches problems early. In particular:
- Don’t schedule sealing before decorators and flooring are done
- Ask installers to correct oversized gaps first
- Stick to the specified sealant rather than a generic substitute
- Keep scrapers and abrasive pads off new beads
At handover, keep the product details with the O&M information. Future maintenance is easier when the products are known, and tells you what to reseal with. Tell us what records you need and we’ll confirm with the quote.
Leaving the mastic snag list to the end squeezes everyone. A planned close-out through each area as it completes keeps the list short.
What we are called out for in Arinagour
Wide, tapered or inconsistent gaps around frames are a common problem. Sealant has a range of joint widths it can cope with and gaps beyond it need packing or adjusting by the frame installer. We flag them early rather than filling them with sealant that won’t last.
Clients normally get in touch after noticing something like this:
- Sanitary sealant damaged by following trades
- Mastic snags holding up handover
- Early adhesion failures on new external joints
- Frame gaps too wide for sealant alone
With historic properties like Breachacha House, 4.5 miles to the south-west of Arinagour, in the area, refurbishment work often meets old masonry that needs compatible sealants.
Comparing quotes
- How they handle RAMS and site documents
- Health and safety accreditation such as CHAS
- Who will actually carry out the work
- Their plan for phasing and protecting the area
Cost factors for mastic packages
Quotes vary with the job. It mainly depends on:
- Working within restricted access windows
- Which sealant the job calls for
- Travel to remote or island sites
- The site’s rules and procedures
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
What to include in your enquiry
Whether it’s one area or a whole building, the same details help:
- Asbestos survey details if the building is older
- The type of building and who uses it
- Drawings or a marked-up plan, if available
- When you need the work done
To get a fixed quote, call the office on 01277 525 020 or send photos by email with the site address and an outline of the work. Our quote form is another easy route.
Owners, agents and contractors
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Arinagour. One quote can cover more than one site, which keeps the paperwork simple.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.