Construction and new-build mastic in Ardtun, Argyll and Bute
Looking for construction mastic in Ardtun? It’s simple: send details, get a quote, we seal, guaranteed.
- Early adhesion failures on new external joints
- Window and door perimeters that won’t pass inspection
- Frame gaps too wide for sealant alone
Construction mastic across Ardtun
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Construction mastic for commercial buildings in Ardtun
Refurbishment work needs a slightly different approach from new build. Old beads come out completely, as fresh silicone can’t grip old and the asbestos survey is checked first on older stock. After that, the joints are prepared and sealed to the specification. Most enquiries involve bath and shower joints scraped during the final clean and external joints sealed in damp or cold conditions that are now failing, across brick and block movement joints, sanitary and kitchen joints and floor and skirting junctions. Looking for mastic applicators who cover Ardtun? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
External sealing around Ardtun depends on dry faces and the right temperature. We build some give into the plan and agree it with the site manager.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Place
- Ardtun (PA67)
- Wider area
- Argyll and Bute
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: Ardtun
Is Ardtun off your patch?
No. Places such as Ardtun are covered as much as the big towns. Every Scottish council area is within our area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can the mastic package for our job in Ardtun follow the site programme?
Yes. Send the programme and drawings, and we’ll plan the mastic to suit the stages. Let us know which documents your site asks for, and we will confirm them alongside the quote.
Can the sealant be colour-matched?
That depends on the product specified. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
Can you fit around our programme?
We work to your programme. Share the release dates and we will match our work to them, sealing as areas become ready.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
How long does a typical visit take?
That varies with the scale of the job, but the work usually takes a day or two on a small fit-out and several weeks on a large multi-storey package. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Can fire-rated sealing at service penetrations be included?
We install fire-rated sealant where it is the specified product to the tested detail. We’ll flag if the detail needs a different product.
For managing agents and facilities managers
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Ardtun can sit alongside others in a wider programme across Argyll and Bute.
When to call us in Ardtun
Wide, tapered or inconsistent gaps around frames are a common problem. Every product has limits on how wide a joint it can bridge. We flag them early rather than filling them with sealant that won’t last.
Things that typically lead to an enquiry:
- Sealant knocked or painted over by other trades
- Failed sealant in an existing building being refurbished
- Frame perimeters left unsealed or poorly sealed
- Early adhesion failures on new external joints
A facade joint near Ardtun lasts when width, depth and backing are right, not just the finish.
What to look for in a quote
- How they’ll work around occupants
- Will CSCS-carded applicators be on site?
- Health and safety accreditation such as CHAS
- Will failed sealant be removed rather than covered?
Building and refurbishing in Ardtun
Ardtun is within about 1 mile of the coast. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, so we check the specified product suits the exposure before the first bead. Ardtun is on Scotland’s wetter western side. External mastic needs dry spells, with internal work ready to fill the wet days.
For contractors building in or near Ardtun, we seal to the drawings, the specification and the programme.
Ardtun is about 29 miles west of Oban, in Argyll and Bute. Looking for construction mastic in Ardtun? We can help, as we do across Argyll and Bute. 124 places across Argyll and Bute fall within our area, Ardtun among them.
We cover the PA67 postcode districts for mastic packages. Nearby places we also cover include Bunessan (1 mile south-west), Fionnphort (5 miles west), Baile Mòr (7 miles west), Ballygown (13 miles north) and Upper Kilchattan (16 miles south). Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
Landmarks near Ardtun
Well-known places in the area include Ross Of Mull Historical Centre (0.7 miles south-west). The countryside around Ardtun includes Loch Assapol and Cruachan Mìn.
Leave it or put it right?
Leaving mastic to whichever trade is fitting the element can look cheaper on paper. In practice it often means different standards, gaps in responsibility and snags nobody owns. A single mastic package gives one point of responsibility. Renewing every failing joint on one visit is the sensible approach for a place like Ardtun. Send photographs and we’ll quote for everything together.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
Why us?
- Clear, fixed quotes
- Public liability insurance in place
- Matching to RAL references, product permitting
- Coloured sealants to suit the setting, where available
Take a look at what affects the cost and our accreditations.
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself usually takes as long as the agreed sequence needs, which comes down to joint lengths, access and handover dates, and we clear our waste as we work. Tell us who will meet us and how to get in at your building near Ardtun. That goes into the plan alongside the quote.
- We start with the drawings, specification and programme.
- We take off quantities and return a fixed quote.
- The sequence is agreed with the site manager.
- Each area is sealed when it’s released.
- Every joint is cleaned, set to depth and sealed with the specified product.
- Snags are cleared and the package signed off with our 12-month guarantee.
Preparing the site
- Tell us which areas need to stay in use
- Tell us what induction or permit system the site runs
- Have the specification and drawings to hand
Quotes
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Read more
Looking after the joints
Problems stay small when the joints are checked regularly. Specifically:
- Note which sealant went where at handover
- Allow flexibility for external sealing in damp or cold weather
- Ask installers to correct oversized gaps first
- Get the mastic subcontractor involved early in the programme
A new structure shifts as it loses construction moisture. The right product in each joint copes with that. We can advise if a joint needs a different product.
Sealing outside when the joint is damp or too cold leads to poor adhesion. Holding off until conditions suit avoids callbacks, so we plan external work with that in mind.
Nearby places to Ardtun
What else we do in Ardtun
Surface by surface
Internal decorators’ caulk
Acrylic caulk fills internal gaps around trims, boards and frames ahead of decorating. It’s for gaps that stay still and get painted, and we use a flexible sealant where there’s movement.
Snagging before handover
Snagging is often the final mastic stage. Snags are cleared room by room and damaged joints are redone rather than patched.