
Achintee construction mastic
Mastic packages for new-build and refurbishment projects across Achintee, by CSCS-carded applicators. CHAS accredited and fully insured.
- Inconsistent sealant finishes from plot to plot
- Caulk cracking where joints are moving more than expected
- Sanitary sealant damaged by following trades
Construction mastic across Achintee
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Construction mastic for commercial buildings in Achintee
Buyers, tenants and clients notice sealant lines long before they notice the structure. A smeared bead round a window or a gap behind a worktop ends up on the snag list and clearing them late eats into the handover window. Our aim is joints that pass at the first inspection, area by area through the programme. We work on floor and skirting junctions, internal decorators’ caulk and sanitary and kitchen joints, and what we’re called in for most is snag items on joints that need redoing before handover and early adhesion failures on new external joints. Most enquiries from Achintee start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a site around Achintee, we plan the mastic in as few trips as the programme allows. Send drawings, photos and the programme so everything needed arrives on the first day.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Achintee (IV54)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026

Achintee: questions and answers
Will you fit the mastic around our build programme in Achintee?
Yes. The mastic is planned around your key stages. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is Achintee too far out for you?
Not at all: smaller places are covered as well as towns. We work across every Scottish council area. Good photographs up front let us bring everything on the first visit.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
How many days will you need on site?
That varies with the scale of the job, though a typical visit usually takes whatever the programme allows, since the work follows the trades as areas are released. For bigger or phased jobs, we’ll set out a timescale with the quote.
Do you do fire-rated sealing on new builds?
Where the specification calls for fire-rated or intumescent sealant around service penetrations or linear gaps, we install it to the manufacturer’s tested details. The design and sign-off belong to the designer, fire engineer or building control.
What will the job cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
What accreditations do you hold?
CHAS and Constructionline are both in place, and each applicator is CSCS-carded. Public liability insurance is in place.
What happens if it’s left?
Patching snags as they appear can feel quicker than a proper close-out. But one planned snagging pass through each area typically clears more for less disruption. Snagging can be priced as a separate stage. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Achintee, a repair visit takes planning, so it’s better to act early.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
Why appoint us
- Colour options checked against the specified product
- Products installed to the manufacturer’s instructions
- Fixed quotes based on photos, drawings or a visit
- Over 20 years of commercial sealing
Take a look at what affects the cost or how we’re accredited.
Places near Achintee
Also in Achintee
Diagnose, treat, sign off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes anything from a day of snagging to several weeks of plot-by-plot sealing on a phased scheme, and we clear our waste as we work. For a building near Achintee, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- Drawings, the sealant specification and your programme come to us for pricing.
- A fixed quote sets out the scope, the products and the sequence.
- Any site paperwork you need (RAMS, insurance certificate, CSCS details) is confirmed with the quote.
- We seal each plot or floor as it’s released to us.
- Joints are cleaned, primed where the maker requires it, backed and sealed to the specification.
- Before handover, snags are dealt with and the package is signed off under our 12-month guarantee.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Arrange parking or a loading space
- Tell us which areas need to stay in use
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, speak to us on 01277 525 020 or send photos by email.
Advice
Mastic packages on Achintee sites
Achintee sits close to the coast, within about 1 mile. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, which puts weight on correct joint sizing, priming and a sealant suited to the exposure. Building work in Achintee comes under the Building (Scotland) Regulations 2004 and their technical handbooks, with warrants from the local authority verifier. The mastic package follows the approved specification.
Hotels like Strathcarron Hotel (under half a mile north of Achintee) rarely close for long, so refurbishment mastic is phased floor by floor.
Achintee is in Highland. Our applicators travel to Achintee for work on mastic packages, handled exactly as we handle every other area. Achintee is one of 256 places we cover in Highland for mastic packages.
We cover the IV54 postcode districts. Nearby places we also cover include Srath Carran (1 mile north), Lochcarron (2 miles south-west), Balnacra (4 miles north-east), Strome Ferry (6 miles south-west) and Torridon (9 miles north). For island and remote sites, we plan travel and materials carefully.
Local landmarks in Achintee
Achintee has its own railway station: Strathcarron station. Green spaces nearby include Loch Dùghaill.
When it isn’t the sealant
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Specifying the product where the designer hasn’t
- Fire-stopping design or sign-off (that’s for the designer, fire engineer and building control)
- Frames fitted out of tolerance
If in doubt, ring 01277 525 020 or send details through our quote form and we will say what we think before you book.
Where we work in Achintee
- Sanitary and kitchen joints
- Internal decorators’ caulk
- Window and door perimeters
- Floor and skirting junctions
- Brick and block movement joints
- Cladding and panel joints
When to call us in Achintee
Wide, tapered or inconsistent gaps around frames are a common problem. Every product has limits on how wide a joint it can bridge and gaps beyond it need packing or adjusting by the frame installer. We flag them early rather than filling them with sealant that won’t last.
Typical triggers for a call:
- Inconsistent sealant finishes from plot to plot
- Failed sealant in an existing building being refurbished
- Internal caulk splitting as the building dries out
- Bath and shower joints scraped during the final clean
When a school such as Kirkton in Meikle Strath School is extended or refurbished, the mastic package is often squeezed into the holidays.
What to look for in a quote
- Their pre-qualification and accreditations
- Their approach to joint depth and backing
- Do they follow the manufacturer’s priming guidance?
- What level of public liability insurance do they hold?
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- Removal of failed or old sealant
- Site requirements such as inductions and permits
- The total length or number of joints
- The product specified
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
What to include in your enquiry
To price the job accurately, we need to understand the site. Send us:
- Anything awkward about access or site hours
- Approximate linear metres or a joint schedule
- A wide shot and a close-up of the area
- The postcode of the building
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, call the office on 01277 525 020 or email drawings and photos.
Work for main contractors and building owners
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.