Mastic contractors in Abinger
Construction mastic in Abinger, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Different trades sealing to different standards
- Existing joints on a refurb that need cutting out and resealing
- Sanitary sealant damaged by following trades
Need construction mastic in Abinger?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our construction mastic in Abinger
The specification and the programme set the job rather than whatever product is to hand. If a product is named, that’s what goes in; any alternative we suggest is put to you before anything changes. Backing, primer and depth follow what the sealant maker sets out so the detail on the drawing is what ends up on site. If you have new external sealant already peeling away and window and door perimeters that won’t pass inspection, we can put it right, on internal decorators’ caulk, brick and block movement joints and window and door perimeters alike. Most enquiries from Abinger start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Sites around smaller places like Abinger can be a fair drive from suppliers, so we come with everything the package needs, timed to the stage the job has reached. Send drawings or photos and the programme and we will quote to suit.
Work we carry out in Surrey comes with a 12-month guarantee. Should something we installed fail, phone 01277 525 020 or use the quote form and we will come back to it.
- Place
- Abinger (RH5)
- Wider area
- Surrey
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Specifying the product where the designer hasn’t
- Fire-stopping design or sign-off (that’s for the designer, fire engineer and building control)
- Defective windows, doors or glazing units (the supplier or installer’s job)
If you’re not sure, just phone 01277 525 020 or use the quote form and we’ll give you a straight answer before you book.
Where we work in Abinger
- Floor and skirting junctions
- Internal decorators’ caulk
- Brick and block movement joints
- Window and door perimeters
- Sanitary and kitchen joints
- Cladding and panel joints
What we’re called out for in Abinger
Wide, tapered or inconsistent gaps around frames are a common problem. Sealant has a range of joint widths it can cope with, so gaps outside that range need sorting by the installer first. We flag them early rather than filling them with sealant that won’t last.
Any of the following is a good reason to get the joints checked over:
- Early adhesion failures on new external joints
- A mastic package split between trades with no clear owner
- Old sealant on a refurbishment that needs stripping before new work
- Missed perimeter joints on a new elevation
With historic properties like Polesden Lacey (3.9 miles north-east of Abinger) in the area, refurbishment work often meets old masonry that needs compatible sealants.
What your quote should include
- Their public liability cover
- Their approach to joint depth and backing
- Which product they’ll use, and why it suits the joint
- Whether primer will be used where the manufacturer specifies it
Questions we are asked in Abinger
Is Abinger too far out for you?
Not at all. Abinger is within our area. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Do you cover business parks and estates near Abinger, such as Chapel Lane Industrial Estate?
Yes. Estates, retail parks and business parks around Abinger, Chapel Lane Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
What guarantee comes with a mastic package?
It’s backed by our 12-month guarantee, covering how we sealed. Keeping other trades off finished joints prevents most problems.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
What do you charge?
We don’t publish prices, as every site differs. With photographs or drawings, we can give you a fixed quote.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Commercial clients in Abinger
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so the building keeps working while we do.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Also near Abinger
More services for Abinger
Cost factors for mastic packages
The price varies from site to site. Expect it to depend on:
- Working within restricted access windows
- Specialist products, such as fire-rated or hygienic sealants
- Joint width, depth and condition
- How much there is to seal
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Before you send an enquiry
A few photos plus some basic facts will normally do. It helps to include:
- Any dates the work must fit around
- Photos of the joints, close up and from further back
- The postcode of the building
- Access details, including height
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. If you have questions first, give us a call on 01277 525 020 or use the quote form.
Building and refurbishing in Abinger
Abinger lies roughly 24 miles out from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, which keeps mastic packages in demand. Abinger is in the South East, one of the UK’s drier regions. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so the external programme keeps a little slack.
For contractors at a school such as Belmont Prep School, sealing has to be finished before term starts. When units on a site such as Chapel Lane Industrial Estate (2.4 miles north-east of Abinger) are refurbished or reclad, the panel joints and window perimeters are part of the mastic package.
Abinger is about 4 miles south-west of Dorking, in Surrey. If you are looking for construction mastic in Abinger, we can help, as we do across Surrey. We work across 379 places in Surrey, from busy centres to rural villages. There’s a separate page for London, about 24 miles away.
Anyone looking for construction mastic in RH5 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Raikes Lane, Sutton Lane and Abinger Lane are within our area. If your building is just outside Abinger, we cover Sutton Abinger (1 mile west), Abinger Hammer (1 mile north-west), Hoe (1 mile west), Gomshall (2 miles north-west) and Shere (3 miles west). Further afield, our area takes in Guildford (8 miles west), Woking (10 miles north-west), Epsom (11 miles north-east), Horley (11 miles east), Redhill (11 miles east) and Ewell (12 miles north-east).
Near you in Abinger
We work on buildings around Wotton and Abinger Commons, The Abinger Hatch Public House and Hurtwood House. For rail, the closest station is Gomshall station, roughly 1.7 miles north-west. Well-known places in the area include Abinger Castle (less than half a mile south-east) and Mesolithic Museum (less than half a mile south). Green spaces nearby include Leith Hill and Combe Bottom.
General trades versus a specialist
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes a day or two on a small fit-out and several weeks on a large multi-storey package, and our waste is bagged and taken away as we go. Jobs in and around smaller places like Abinger are normally planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We start with the drawings, specification and programme.
- We take off quantities and return a fixed quote.
- The sequence is agreed with the site manager.
- Each area is sealed when it’s released.
- Every joint is cleaned, set to depth and sealed with the specified product.
- After snagging, the work is handed over under our 12-month guarantee.
What we need from you
- Send asbestos survey details if the building is pre-2000
- Send your site hours and access windows
- Explain the parking and delivery arrangements
Get a fixed quote
To get a fixed quote, give us a call on 01277 525 020 or email drawings and photos with the site address and an outline of the work. Our quote form is another easy route.