Commercial sealant contractors in Wick, West Sussex
We carry out sealant work for offices, shops, hotels and other commercial buildings in Wick. Send photos or drawings for a fixed quote.
- Shrunken sealant along kitchen worktops and splashbacks
- Earlier reseals applied straight onto the failed bead
- Black mould through washroom sealant that won’t clean off
Commercial sealant contractors for Wick sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Work in places the size of Wick is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- We begin with whatever information you have, whether that’s photos, a drawing or a list of locations, or we arrange a site visit.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- The depth is set, primer is used where the maker calls for it, and the fresh bead is applied and tooled.
- Finished joints are checked with you and handed over with our 12-month guarantee.
Getting the site ready
- Share your working hours and any access restrictions
- Tell us what induction or permit system the site runs
- Tell us which areas need to stay in use
Quotes
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call the office on 01277 525 020 or email us.
Related advice
Commercial sealant contractors in Wick, done properly
Commercial occupiers rarely want a floor out of action for sealant work. Tell us your site hours and access windows and we’ll plan around them; phased work can also be planned so areas stay in use. That applies whether the building is an office, a shop, a hotel, a college or a care home. We work on external facade joints, movement joints in walls and floors and floor and threshold joints, and what we’re called in for most is leaks that seem to come through a sealant line and frame mastic that has hardened and come away from the wall. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Wick, that means joint design, primers and backing rod as standard.
In an occupied building in Wick, the job is planned so areas stay in use: we agree the order with you and hand back each area with its cure time.
Places like Wick tend to have a handful of commercial buildings: a local shop, a pub or restaurant, a surgery, a school and the odd office or workshop. Each job is modest, yet a joint in a small café needs the same cutting out, cleaning and sealing as one in a city office.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Place
- Wick (BN17)
- Wider area
- West Sussex
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Do you need commercial sealant contractors in Wick?
The wrong sealant in the wrong place is a common cause of early failure. Decorators’ caulk on a joint that moves, acetoxy silicone on stone or metal, or a stiff sealant on a facade all let go sooner than they should. Guidance such as BS 6213 exists to steer sealant selection for exactly this reason.
It’s worth sending us details if you spot any of the following:
- Shrunken sealant along kitchen worktops and splashbacks
- Window and door perimeter joints that have cracked open
- Mouldy silicone around WCs, urinals and vanity tops
- Untidy joints in a reception, shop floor or lobby
Refits at hotels like Victoria Hotel (1 mile south-east of Wick) bring joints at vanity tops, bars and reception desks that guests see every day.
Comparing quotes
- What site paperwork they can supply
- Whether primer will be used where the manufacturer specifies it
- Proof of insurance
- How long is the guarantee, and what does it include?
Keeping the joints sound
For the best life from the joints:
- Respect the cure time before reopening an area
- Check the asbestos register before anyone disturbs old sealant in an older building
- Deal with small splits before they become leaks
- Keep washroom and kitchen extraction working
Later works are the usual way new joints get damaged. Shop refits, new services and replaced fittings often break the seal around them, and it’s easy to forget to reseal afterwards. Where work has disturbed a joint, just give us a call on 01277 525 020 or use the quote form for a quote.
Once sealant fails in a movement joint, grit and debris get in. With nothing soft to close against, the materials either side take the load and start to break up. At that point it’s a repair job rather than a reseal.
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Honest limits
Not every problem is a sealant problem, and we are upfront when that’s the case. It won’t fix:
- Leaking roofs, gutters or flat-roof membranes (those need a roofer)
- Cracking that needs a structural engineer to look at it
- Water from a services leak rather than a joint
If in doubt, call the office on 01277 525 020 or use the quote form and we will say what we think before you book.
What we seal
- Floor and threshold joints
- Window and door perimeters
- Movement joints in walls and floors
- External facade joints
- Kitchen worktops and splashbacks
- Washrooms and tea points
How the job changes by surface
Shop fronts and retail fit-outs
Shop fits put sealant right in front of clients. Counters, display units, shopfront frames and floor trims all need a neat line. We will confirm the colours available for the specified product.
Washrooms and toilets
Around WCs, urinals, vanity tops, IPS panels and cubicles, sealant is wet most of the day. We cut out mouldy or split beads and reseal in anti-mould sanitary silicone, with phased work so some facilities stay open.
Working on commercial sites near Wick
Wick sits close to the coast, within about 2 miles. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. A matched colour is only half the brief on an exposed frontage. Wick has several hotels close by, all within 2 miles. A hotel refurbishment is full of joints that guests will see, and a matched colour keeps them discreet; work is planned so the hotel keeps trading.
If you have premises on more than one site, say at Lineside Road Industrial Estate and Riverside Industrial Estate, one contractor and one quote can cover both. Shops and cafés around stations like Littlehampton station, 0.8 miles south of Wick, trade from early, so work is timed around them.
Wick is about 1 mile north-west of Littlehampton, in West Sussex. Wick sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Wick is one of 373 places in West Sussex on our list for sealant joints. There’s a separate page for Brighton, roughly 18 miles from Wick.
Anyone looking for commercial sealant contractors in BN17 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on Joyce Close, Willow Brook and Wheatcroft. You’ll find Wick on or near the B2284. If your building is just outside Wick, we cover Lyminster (1 mile north), Toddington (1 mile east), Littlehampton (1 mile south-east), Climping (1 mile south-west) and Ford (1 mile west). Nearby towns on our patch include Worthing (7 miles east), Bognor Regis (6 miles west), Chichester (10 miles west), Selsey (12 miles south-west), Shoreham-by-Sea (12 miles east) and Lancing (10 miles east).
Landmarks near Wick
We work on buildings around Littlehampton College, Locomotive Public House and The Littlehampton Academy and the streets around them. Wick’s nearest station is Littlehampton station, about 0.8 miles south. Other landmarks nearby include Zachary Merton Hospital (2.3 miles south-east) and Rustington Museum (2.1 miles south-east). Not far away are Highdown Hill and WWT Arundel.
Common questions from Wick clients
Is Lineside Road Industrial Estate, near Wick, within your area?
Yes, sites like Lineside Road Industrial Estate are within our area, along with the rest of Wick. Send details of the unit and the work through our quote form for a quick quote.
Is Wick off your patch?
No. Places such as Wick are covered as much as the big towns. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
How long does a job like this take?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Can areas stay open during the work?
Phased work can be planned so areas stay in use. Tell us your site hours and access windows and we will plan around them.
What do you need from us to quote?
The main factors are metres of joint, removal, access, the product and how many phases there are. To get a fixed price, send details through our quote form, or phone or email us.
Can one contractor look after sealant on all our buildings?
Yes, across South East England, Greater London and all of Scotland. Each site gets the same process and a single contact.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.