Shipley commercial sealant contractors
Planning work on a sealant joint in Shipley? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Frame mastic that has hardened and come away from the wall
- Leaks that seem to come through a sealant line
- Sanitary sealant that has gone black and patchy
Commercial sealant contractors in Shipley
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Surface by surface
Facade and cladding joints
On a facade, a failed joint is often only visible close up. Photos from a closer viewpoint help us price, with colours confirmed for the product chosen.
Washrooms and toilets
Mould that has grown into washroom sealant can’t typically be cleaned out. The lasting answer is removal, preparation and a new sanitary bead.
Sealant specialists in Shipley
On older buildings, particularly those put up before 2000, some old mastics and sealants may contain asbestos. We ask to see the asbestos register or survey before old sealant is disturbed, because the duty to manage asbestos sits with the dutyholder. Anything suspect is left alone until it has been tested, and we don’t remove asbestos-containing materials ourselves. If you are dealing with hardened, chalky sealant on south-facing or exposed elevations and shrunken sealant along kitchen worktops and splashbacks, we can put it right, on kitchen worktops and splashbacks, window and door perimeters and movement joints in walls and floors alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Shipley, that means joint design, primers and backing rod as standard.
Quotes for commercial sealant in Shipley can come from photos and a joint schedule, or from a walk-round, with the scope listed so everyone knows what’s included.
Rural business units near smaller places such as Shipley are frequently converted agricultural buildings. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently, and a sealant colour that suits the building’s character is often part of the brief.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Place
- Shipley (RH13)
- Region
- West Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Nearby places to Shipley
Other services in Shipley
Why act early in Shipley
It can be tempting to hold sealant work back until the next refurbishment. For internal joints that are only cosmetic, that can make sense, but external and wet-area joints that already leak shouldn’t wait. Splitting the scope into now and later is often the sensible compromise. One visit to deal with every failing joint makes more sense than several trips to a place like Shipley, rather than one at a time. Send photos of each area and we will quote for the lot.
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote and we’ll price your job on its own details.
Why appoint us
- A range of standard colours, depending on the product
- Constructionline member for supplier checks
- Public liability insurance in place
- CHAS accredited contractor
See what affects the cost or our accreditations and insurance.
Questions we’re asked in Shipley
Can the sealant on our Shipley premises match the finishes?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. The quote lists the colours the product is made in.
Is Shipley off your patch?
Not at all. Shipley is within our area. We cover Greater London and the counties of the South East. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
What about asbestos in old mastic?
It’s possible in older buildings, especially those built before 2000. We ask to see the asbestos register or survey before disturbing old sealant, and if something is suspected, work stops until it’s tested.
Is the old sealant taken out first?
Removal of the failed sealant is always part of the job. New sealant can’t grip the old bead, so laying over it never lasts.
Which site documents can you send us?
The paperwork is agreed with the quote: RAMS, an insurance certificate and CSCS details are the usual requests. Our applicators are CSCS-carded.
Is your work guaranteed?
Each job sits under our 12-month guarantee. Looking after the joints as we advise helps them last.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it.
What sealant work can’t fix
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Water from a services leak rather than a joint
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
- Faulty windows rather than failed perimeter sealant
If in doubt, phone 01277 525 020 or send photos by email and we will say what we think.
Surfaces we seal
- Floor and threshold joints
- Washrooms and tea points
- Movement joints in walls and floors
- Window and door perimeters
- Kitchen worktops and splashbacks
- External facade joints
General trades versus a specialist
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Working on commercial sites near Shipley
Shipley sits in one of the drier corners of the country, the South East. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it. Shipley is about 37 miles from central London. This part of the South East is dense with business parks and out-of-town offices. If you have premises across the region, one contractor can cover them all.
Offices and shops close to stations such as Billingshurst station, 4 miles to the north-west of Shipley, tend to be busy all day, so sealant work is planned around opening hours. If you run an office at a site such as Pondtail Farm (Business Park), 1.2 miles north-east of Shipley, the sealant at reception desks, tea points and frames ages with each fit-out. If you have premises on more than one site, say at Pondtail Farm (Business Park) and Southwater Business Park, one contractor and one quote can cover both.
Shipley is about 6 miles south of Horsham, in West Sussex. Shipley sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Our West Sussex coverage takes in 373 places. There’s a separate page for Brighton, roughly 15 miles from Shipley.
If you need commercial sealant contractors in RH13, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Church Close and School Lane are within our area for sealant joints. We also cover Whitehall (1 mile south-west), Dragons Green (1 mile north), Broomer's Corner (1 mile south-west), Dial Post (2 miles south) and West Grinstead (2 miles east) for sealant joints. A short drive away, we cover Crawley (12 miles north-east), Horsham (6 miles north), Worthing (11 miles south), Haywards Heath (12 miles east), Burgess Hill (11 miles east) and Littlehampton (14 miles south-west).
Near you in Shipley
Shipley’s nearest station is Billingshurst station, about 4 miles north-west of the centre. Not far away are Knepp Wildland.
On site: what to expect
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes a few hours for one area, or a planned series of visits across a bigger building, and our waste is bagged and taken away as we go. For a building around Shipley, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- First, details come to us: photographs, drawings or a schedule of the areas.
- We work out why the joints have failed and fix a quote for the agreed scope.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- We fit backing to the right depth, prime where specified and lay the new bead.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
Preparing the site
- Point out parking and an unloading spot
- Agree which areas must stay open
- Tell staff and tenants when we’ll be in
Ask for a quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or ring 01277 525 020 or email a schedule or drawings to discuss it first.
Advice
After the work
Cleaning and maintenance staff play a part too. Pass these on to them:
- Put external and wet-area joints on a regular inspection round
- Deal with small splits before they become leaks
- Ask fit-out and M&E contractors to report any sealant they disturb
- Check the asbestos register before anyone disturbs old sealant in an older building
Put sealant on the planned maintenance checklist. A periodic look catches splits and lifting edges early, with external elevations and wet areas first in line. If anything looks wrong, give us a call on 01277 525 020 or email a schedule or drawings with a photo.
Each spell of wet weather pushes more water through an open joint. Behind a panel or frame, that water can sit unseen for a long time. Catching it at the sealant stage avoids the bigger repair.