The Mastic Doctor team standing beside their branded vans outside an office building
Medway · England

Commercial sealant contractors in Kingsnorth, Medway

Sealant work for offices, shops, hotels and other commercial buildings in Kingsnorth and across Medway. CHAS accredited and fully insured, with a 12-month guarantee.

  • Hardened, chalky sealant on south-facing or exposed elevations
  • Shrunken sealant along kitchen worktops and splashbacks
  • Movement joints packed with grit and debris
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
12-month guarantee on our workmanship.
Covering the South East & Scotland
Constructionline member
Fully insured: £5m PL

Commercial sealant contractors in Kingsnorth

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Commercial clients in Kingsnorth

For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.

Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.

Sealant specialists in Kingsnorth

Mastic Doctor has been sealing joints for businesses and contractors since 2005: we are CHAS accredited and a Constructionline member, our applicators hold CSCS cards, and we carry five million pounds of public liability insurance. If your site needs RAMS, an insurance certificate or CSCS details, say so and we will confirm with the quote. If you have black mould through washroom sealant that won’t clean off and weathered facade sealant that no longer flexes, we can help, whatever the surface. Whoever orders the work in Kingsnorth, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.

A lot of what we do in Kingsnorth is replacing sealant that has done its years: hardened, cracked or shrunk away from the faces, and letting water or dirt in.

Work in smaller places such as Kingsnorth tends to come one building at a time: a pub kitchen, a hall, a small office. We’ll want a full list and photographs first, so the right products come on the day and nothing waits for a second trip.

Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.

The Mastic Doctor team standing beside their branded vans outside an office building
Place
Kingsnorth (ME3)
Wider area
Medway
Guarantee
A 12-month guarantee
Quotes
Fixed quote, scope in writing
Phone
01277 525 020
Page updated
3 November 2026

Different surfaces, different methods

Washrooms and toilets

Black sealant in a toilet block is normally beyond cleaning. Replacement is the fix: strip, clean, dry and reseal, room by room if that suits the building.

Facade and cladding joints

Panel joints on cladding and rendered facades open and close with the temperature. They need a sealant with the right movement capability, laid at the right depth. We confirm the access in place before we quote.

Diagnose, treat, sign off

We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Jobs in and around smaller places like Kingsnorth are usually planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.

  1. Site photographs, drawings or a visit tell us what’s there and how it has failed.
  2. You get a fixed quote covering removal, preparation and the new sealant.
  3. We agree the order of work, access windows and site hours with you.
  4. Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
  5. Depth is set with backing, then the sealant is applied, tooled and the area tidied.
  6. Completed areas are signed off with you under our 12-month guarantee.

Getting the site ready

  • Let building users know which areas are affected
  • Explain the parking and delivery arrangements
  • Send any specification or drawings in advance

Ask for a quote

A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.

Get a quick quote

Related advice

How the quote is worked out

The price varies from site to site. Expect it to depend on:

  • Access and working height
  • Joint width, depth and condition
  • How much existing material needs removing
  • Travel to remote or island sites

A quote for sealant joints depends on how many there are, their condition and the access. Call for a quote.

Details that help us quote

The more we know, the firmer the quote. When you get in touch, include:

  • The site address and postcode
  • The asbestos register, for older buildings
  • Specification clauses that apply
  • Anything awkward about access or site hours

To get a fixed quote, give us a call on 01277 525 020 or email a schedule or drawings. You can also send details through our quote form.

Shops, offices and hotels in and around Kingsnorth

The sea is no more than about 1 mile from Kingsnorth. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. A matched colour is only half the brief on an exposed frontage. Kingsnorth is in the South East, one of the UK’s drier regions. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.

For any commercial premises in Kingsnorth, a lasting joint depends on full removal of the old sealant and clean, dry faces. Shops and cafés around stations like Gillingham (Kent) station (3.6 miles south-west of Kingsnorth) trade from early, so work is timed around them.

Kingsnorth is about 4 miles north of Gillingham, in Medway. We cover commercial sites throughout Kingsnorth. 54 places across Medway fall within our area, including Kingsnorth. There’s a separate page for London, roughly 30 miles from Kingsnorth.

If you need commercial sealant contractors in ME3, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Jetty Road and Jacob's Lane or close by, send details and we’ll quote for sealant joints. We also cover Tunbridge Hill (1 mile north), Sharnal Street (1 mile north-west), Fenn Street (1 mile north-west), Hoo St Werburgh (2 miles west) and High Halstow (2 miles north-west). Bigger towns within reach include Gillingham (4 miles south), Chatham (6 miles south-west), Rochester (5 miles south-west), Rainham (5 miles south), Strood (6 miles south-west) and Luton (5 miles south-west).

Around Kingsnorth

The closest station to Kingsnorth is Gillingham (Kent) station, about 3.6 miles south-west of the centre. A little further out are Medway Maritime Hospital (4.2 miles south-west) and Upnor Castle (3.5 miles south-west). Not far away are Bishop Saltings.

Map of Kingsnorth © OpenStreetMap contributors

Common questions from Kingsnorth clients

Does a coastal location like Kingsnorth affect which sealant is used?

It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.

Do you offer colour-matched sealant for buildings in Kingsnorth?

Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Send colour references or photos and we’ll confirm what’s available for the product.

Who decides which product is used?

Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.

How do you keep disruption to occupiers down?

It’s mostly about sequence: areas are phased, access windows agreed and enough washrooms or entrances left in use. Tell us what has to stay open and we’ll plan the job around it.

Is the old sealant taken out first?

The old bead is stripped out first. Then the joint is cleaned, primed where the maker specifies, backed to depth and resealed.

Do you seal on top of existing sealant?

No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.

Can you supply RAMS and insurance details?

Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote. We hold CHAS accreditation and Constructionline membership and carry five million pounds of public liability insurance.

Should maintenance staff do it?

Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

What we can’t put right

Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:

  • Broken glass or blown double-glazed units
  • Leaking roofs, gutters or flat-roof membranes (those need a roofer)
  • Leaks from pipework, wastes or valves (that’s plumbing)

If in doubt, phone 01277 525 020 or email drawings and photos and we will say what we think.

Joints and surfaces we work on

  • Washrooms and tea points
  • Movement joints in walls and floors
  • Window and door perimeters
  • External facade joints
  • Floor and threshold joints
  • Kitchen worktops and splashbacks
Accreditations

Trusted. Accredited. Insured.