Sealant specialists in Inveraldie
Our CSCS-carded applicators take on sealant work for offices, shops, hotels and other commercial buildings in Inveraldie. Send details for a fixed quote.
- Layers of sealant, all of them failing
- Shrunken sealant along kitchen worktops and splashbacks
- Mouldy silicone around WCs, urinals and vanity tops
Commercial sealant contractors for Inveraldie sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our commercial sealant contractors in Inveraldie
Failed sealant isn’t always the whole story. Water at a window perimeter might be coming from the frame, the cill or the wall behind while a movement joint that keeps tearing may simply be too narrow for the job. We look before we quote and tell you plainly if sealant won’t solve it. The enquiries we see most involve gaps behind commercial kitchen worktops and sinks and mouldy silicone around WCs, urinals and vanity tops, across washrooms and tea points, kitchen worktops and splashbacks and movement joints in walls and floors. Searching for sealant specialists in Inveraldie? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
We price commercial jobs in Inveraldie from photos, drawings or a site visit, and the scope is set out in writing.
Scottish weather decides a lot about outside work in a place like Inveraldie: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Internal joints can be done whatever the day brings.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, phone 01277 525 020 or send details through our quote form and we will come back to it.
- Place
- Inveraldie (DD4)
- Region
- Angus
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Shops, offices and hotels in and around Inveraldie
Inveraldie is in the east of Scotland, which is drier than the west. Cold, frosty mornings and condensation on steel and glass can still delay outside work. Outside work is booked with that in mind Two named trading, business or retail sites lie within about 3 miles of Inveraldie. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal.
Shops and cafés around stations like Dundee station, 4.6 miles to the south of Inveraldie, trade from early, so work is timed around them. Sites a few miles apart, such as Claverhouse Industrial Park and Happyhillock Shopping Centre, can share one programme and one point of contact. Industrial estates such as Claverhouse Industrial Park (1.9 miles south of Inveraldie) have offices, trade counters and welfare areas whose sealant ages like any other building’s.
Inveraldie is about 4 miles north of Dundee, in Angus. Commercial clients in Inveraldie can call on us for sealant joints. 65 places across Angus fall within our area, Inveraldie among them.
We cover the DD4 postcode districts for sealant joints. Among the streets we cover are Hall Place, Dalziel Road and Inveraldie Crescent, and sites on any of them can send details for a fixed quote. We also cover Tealing (1 mile north-west), Barns of Claverhouse (1 mile south), Burnside of Duntrune (2 miles south-east), Claverhouse (2 miles south) and Mill of Mains (2 miles south) for sealant joints. A short drive away, we cover Arbroath (14 miles east), Forfar (9 miles north), Monifieth (5 miles south-east), Carnoustie (9 miles east), Kirriemuir (11 miles north) and Hunter's Town (8 miles east).
Around Inveraldie
The closest station to Inveraldie is Dundee station, about 4.6 miles south. Other landmarks nearby include Powrie Castle (1.5 miles south) and Maryfield Hospital (3.2 miles south). Open spaces near Inveraldie include Gallow Hill and Trottick Mill Ponds.
Our process
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Tell us who will meet us and how to get in at your building near Inveraldie. That goes into the plan alongside the quote.
- Send details through our quote form, or ask for a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Work is phased around your occupiers where areas need to stay in use.
- Every failed bead is removed rather than covered.
- Each joint gets a suitable sealant, laid to depth and tooled.
- We check the work with you, and the 12-month guarantee starts.
Preparing the site
- Let us know about inductions and permits
- Move anything stored against the joints
- Send your site hours and access windows
Get a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Advice
Aftercare for building managers
Once the work is signed off, a little attention goes a long way:
- Report cracked or peeling sealant early
- Don’t let cleaning or traffic back on before the cure time is up
- Ask cleaners to use a soft cloth and mild cleaner on sealant
- Look at the sealant around anything that has been moved or replaced
Good ventilation keeps wet-area sealant in better condition. Extraction that isn’t working keeps the joints wet. Your maintenance team can look at extract fans at the same time.
Each spell of wet weather pushes more water through an open joint. It can run into cavities, insulation and internal finishes long before anyone sees a stain. Catching it at the sealant stage avoids the bigger repair.
Different surfaces, different methods
Facade and cladding joints
On a facade, a failed joint is often only visible close up. Close-up photographs or a site visit tell us what’s needed, and we’ll confirm the colours available for the specified product.
Window and door perimeters
Where frames meet the surrounding wall, sealant is the weather line. Failed perimeters are cut out and cleaned, backing goes into deeper gaps, and the joint is resealed with a low-modulus neutral-cure silicone or another suitable product.
Questions we are asked in Inveraldie
Can the sealant on our Inveraldie premises match the finishes?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Available colours for the product are confirmed with the quote.
Can you work at a site such as Claverhouse Industrial Park, by Inveraldie?
Yes, sites like Claverhouse Industrial Park are within our area, along with the rest of Inveraldie. To start, just give us a call on 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Can you work to our specification?
Yes. Send it with your enquiry, and we’ll price the work to it.
Is your work guaranteed?
It’s backed by our 12-month guarantee. Should a joint we sealed give trouble during those 12 months, let us know and we will look at it.
Is failed sealant stripped out, or sealed over?
Full removal is part of every quote. A bead laid on old silicone peels away and isn’t worth paying for.
How long does a job like this take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
What sealant work can’t fix
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Suspect materials that need testing and specialist removal
- Leaking roofs, gutters or flat-roof membranes (those need a roofer)
- Misted, cracked or failed glazing units (a glazier’s job)
If you are not sure, just call the office on 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
What we seal
- Floor and threshold joints
- External facade joints
- Kitchen worktops and splashbacks
- Washrooms and tea points
- Window and door perimeters
- Movement joints in walls and floors
When to bring in a specialist
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Places near Inveraldie
More services for Inveraldie
Leave it or put it right?
Before budgeting for new frames, cubicles or worktops, check whether it’s just the sealant. In many cases the element is fine and only the seal around it has given up. A careful reseal is a far smaller undertaking than replacement. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Inveraldie before they leak.
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you are ready.
Why appoint us
- Fixed quotes based on photographs, drawings or a visit
- Constructionline member for supplier checks
- Coloured sealants to suit the setting, where available
- Failed material removed, not covered up
Take a look at our cost guide or our accreditations and insurance.