Commercial sealant contractors in Findon, Aberdeenshire
Commercial sealant contractors for Findon, from a contractor working since 2005. Fully insured and CHAS accredited.
- Earlier reseals applied straight onto the failed bead
- Damp patches where an external joint has failed
- Hardened, chalky sealant on south-facing or exposed elevations
Commercial sealant contractors in Findon
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Commercial sealant contractors in Findon
How long a joint lasts is decided before any sealant leaves the gun. Silicone has no grip on cured silicone, so the failed bead is cut out completely. Primer is used wherever the manufacturer calls for it on that surface. If you have a top-up bead over failed sealant, now lifting and wall and floor joints that have lost their seal, we can help, on washrooms and tea points, external facade joints and kitchen worktops and splashbacks alike. A specialist sealant contractor works differently from a general builder: on jobs in Findon, preparation and product choice get the time they need.
A lot of what we do in Findon is replacing sealant that has done its years: hardened, cracked or shrunk away from the faces, and letting water or dirt in.
For work in and around Findon, we’d rather do everything on one trip, so it helps to have photos and a full list first. If neighbouring businesses have work too, the visits can be grouped.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Findon (AB12)
- Wider area
- Aberdeenshire
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Questions about Findon
Will you take on work at estates like Blackhill Industrial Estate - B Block, close to Findon?
Yes. We cover Findon and the area around it, including industrial estates, business parks and retail parks such as Blackhill Industrial Estate - B Block. Send details of the unit and the work through our quote form for a quick quote.
Is Findon too far out for you?
Not at all. Findon is within our area. Every Scottish council area is within our area. Good photographs up front let us bring everything on the first visit.
Do you take on multi-site sealant work?
Yes. We regularly take on multi-site work and planned maintenance programmes, priced site by site or as one programme.
How long does a job like this take?
The duration is planned around your programme and the access we are given. We’ll give you an estimate of time on site when we quote.
Which site documents can you send us?
Send your site requirements with the enquiry, and the paperwork is confirmed with the quote. From you, we’ll need the asbestos information for older buildings and any site rules.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Our process
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Where we can, we combine work around Findon with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- First, details come to us: photos, drawings or a schedule of the areas, and a site visit is booked where it helps.
- Next comes a diagnosis and a fixed quote.
- Site hours, access windows and the order of areas are agreed before we start.
- We strip the failed bead and prepare both faces of the joint.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Finished joints are checked with you and handed over with our 12-month guarantee.
Preparing the site
- Have the specification and drawings to hand
- Arrange parking or a loading space
- For older buildings, check the asbestos register before work
Get a fixed quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, speak to us on 01277 525 020 or email the details over.
Read more
What the job involves on each surface
Facade and cladding joints
Facade sealant failures can be hard to spot from the ground. Close-up photographs or a site visit tell us what’s needed.
Washrooms and toilets
Around WCs, urinals, vanity tops, IPS panels and cubicles, sealant is wet most of the day. Old sealant comes out and a sanitary silicone with anti-mould additives goes in.
Work for main contractors and building owners
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Findon can sit alongside others in a wider programme.
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Sealant on show in Findon’s commercial buildings
Findon sits close to the coast, within about 1 mile. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. Sea-facing elevations are typically where failed joints show first. The east of Scotland, where Findon is, gets less rain than the west. Cold, frosty mornings and condensation on steel and glass can still delay outside work. We plan external frontages and frames around that
Premises within reach of Portlethen station (to the south-west of Findon) often have busy frontages where joints are seen by everyone passing. Trade counters and showrooms on estates such as Blackhill Industrial Estate - B Block (to the west of Findon) need neat joints where customers see them. A business with units at Blackhill Industrial Estate - B Block and Blackhill Industrial Estate - A Block needn’t use two contractors for its sealant.
Findon is about 6 miles south of Aberdeen, in Aberdeenshire. If you are looking for commercial sealant contractors in Findon, we can help. Our Aberdeenshire coverage takes in 179 places. We also cover Aberdeen, around 6 miles from Findon.
If you need commercial sealant contractors in AB12, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Earnsheugh Road, Earnsheugh Terrace and Old Inn Road or nearby, send details and we’ll quote for sealant joints. Close to Findon, our area also takes in Portlethen Village (1 mile south), Marywell (1 mile north), Portlethen (1 mile west), Badentoy Park (2 miles west) and Cammachmore (3 miles south-west). Further afield, our area takes in Westhill (9 miles north-west), Stonehaven (8 miles south-west), Banchory (14 miles west), Kintore (15 miles north-west), Newmachar (14 miles north) and Balmedie (13 miles north).
Local landmarks in Findon
In Findon, that means premises near Portlethen Academy and the streets around them. The closest station to Findon is Portlethen station, about 1 mile south-west. Nearby you will also find Aberdeen Trades Hospitals (5.4 miles north) and Blairs College (4 miles north-west). For a walk, there’s Blue Hill and Portlethen Moss.
Site staff or a sealant specialist?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
When it isn’t the sealant
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- A failed roof covering or waterproofing membrane
- Faulty windows rather than failed perimeter sealant
- Old mastic that tests positive for asbestos
If you are not sure, just call the office on 01277 525 020 or email the details over and we will give you a straight answer.
Where we work in Findon
- Kitchen worktops and splashbacks
- External facade joints
- Floor and threshold joints
- Washrooms and tea points
- Movement joints in walls and floors
- Window and door perimeters
More services for Findon
After the work
Keep the joints in good shape with a few simple steps:
- Don’t let cleaning or traffic back on before the cure time is up
- Make sure contractors see the asbestos survey before cutting out old mastic
- Ask fit-out and M&E contractors to report any sealant they disturb
- Put external and wet-area joints on a regular inspection round
New joints need their full cure time before they take water, cleaning or traffic. Cure time varies with the product, conditions and depth of the joint, and we confirm it when each area is handed back. Leaving the area closed until then keeps the bead neat.
Sealant rarely fails all at once across a building. A few splits this year usually mean more next year. We can assess the lot and suggest what to do now and later.