Commercial Sealant Contractors in Ellon
Need commercial sealant contractors in Ellon? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Layers of sealant, all of them failing
- Untidy joints in a reception, shop floor or lobby
- Mouldy silicone around WCs, urinals and vanity tops
Need commercial sealant contractors in Ellon?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Commercial sealant contractors in Ellon, done properly
How long a joint lasts is decided before any sealant leaves the gun. Old silicone gives new sealant nothing to grip, so every trace of it is removed and the faces are cleaned until they’re sound and dry, with no dust or grease left. Primer is used wherever the manufacturer calls for it on that surface and the joint depth is controlled with backing rod. We work on external facade joints, washrooms and tea points and kitchen worktops and splashbacks, and what we are called in for most is weathered facade sealant that no longer flexes and gaps behind commercial kitchen worktops and sinks. A single leaking joint is often how a building in Ellon first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
A lot of what we do in Ellon is replacing sealant that has done its years: split, chalky or peeling, with leaks or mould starting behind it.
Around smaller places such as Ellon, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Their kitchens, washrooms and window perimeters all need joints that keep water out.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Ellon (AB41)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Washrooms and toilets
Mould that has grown into washroom sealant can’t normally be cleaned out. Replacement is the fix: strip, clean, dry and reseal, room by room if that suits the building.
Fire-rated seals where specified
Not every penetration suits a sealant. Other products, such as collars, wraps and batts, are specified for different services, so we will flag it if the detail needs a different product.
Honest limits
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be one of these:
- Misted, cracked or failed glazing units (a glazier’s job)
- Structural cracks or movement the joints weren’t designed for
- A failed roof covering or waterproofing membrane
If you’re not sure, just call the office on 01277 525 020 or email drawings and photos and we’ll give you a straight answer.
Joints and surfaces we work on
- Window and door perimeters
- Movement joints in walls and floors
- Kitchen worktops and splashbacks
- Washrooms and tea points
- Floor and threshold joints
- External facade joints
Our process
We follow your site rules from the start: signing in, inductions and any permit to work. Once we’re cleared to begin, we take the joints in the sequence agreed with you. For a building near Ellon, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- You send photos, drawings or a list of the joints and areas involved, or we arrange a site visit.
- We work out why the joints have failed and fix a quote for the agreed scope.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- Backing and primer go in where needed, then the chosen sealant is applied and tooled.
- Each area is inspected, signed off and backed by our 12-month guarantee.
Before we start on site
- Let building users know which areas are affected
- Move anything stored against the joints
- Tell us your opening times and when work is allowed
Request a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or email the details over.
Read more
Why act early in Ellon
A cheaper quote sometimes means the old bead stays in. New sealant laid on old silicone has nothing to bond to, so it peels. Our prices always include removal of the failed bead and full joint preparation, which is where the lasting value is. For buildings near Ellon, dealing with all the failing joints at once saves return trips. Send photographs and we will quote for everything together.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Why us?
- One phone line for London, the South East and Scotland
- Specification-led, product-correct work
- Joints cleaned back to sound surfaces
- CHAS accredited contractor
Read our cost guide and our accreditations.
Should maintenance staff do it?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Your questions answered
Is Ellon off your patch?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Good photographs up front let us bring everything on the first visit.
Will our hotel in Ellon need to close for the work?
In most cases no closure is needed: we work room by room or floor by floor. Tell us your quiet periods and access windows and we will plan around them.
Can you supply RAMS and insurance details?
The paperwork is agreed with the quote: most clients ask for RAMS, our insurance certificate and CSCS details. Our applicators are CSCS-carded.
Will the building have to shut during the work?
We phase the work so parts of the building stay open. We plan around the site hours and access windows you give us.
How do you choose the sealant?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
Do you check for asbestos before removing sealant?
Some older mastics did contain asbestos. So we check the register first and stop work on anything suspect until it’s tested.
Nearby places to Ellon
Also in Ellon
Shops, offices and hotels in and around Ellon
A 2-mile radius around Ellon takes in a number of hotels. In hotels, sealant shows everywhere, from bathroom joints to reception counters, so colour and a clean finish matter, and the work can be phased so the rest of the hotel keeps trading. Ellon is on Scotland’s drier eastern side. Cold, frosty mornings and condensation on steel and glass can still delay outside work. We plan external frontages and frames around that
A hotel such as New Inn Hotel, under half a mile south of Ellon, shows how much sealant a hospitality building has on show, from bathroom joints to the bar. Sites a few miles apart, such as Ellon Business Park and Tipperty Industrial Centre, can share one programme and one point of contact. Parks like Ellon Business Park (to the east of Ellon) see tenants come and go, and every move-in brings joints to seal.
Ellon is about 15 miles north of Aberdeen, in Aberdeenshire. Across the AB41 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our Aberdeenshire coverage takes in 179 places, from busy centres to rural villages. Sites around Aberdeen have their own page, about 15 miles away.
We cover the AB41 postcode districts. If your site is on Market Hill, Firhill Square and Market Brae or close by, we can quote for sealant joints. Ellon sits on or close to the A920 and A948, which helps when planning parking and deliveries for the job. Just outside Ellon, we also work in Newburgh (4 miles south-east), Foveran (5 miles south), Pitmedden (5 miles south-west), Cultercullen (5 miles south-west) and Udny Station (5 miles south-west). A short drive away, we cover Peterhead (14 miles north-east), Inverurie (13 miles south-west), Garioch (13 miles south-west), Roanheads (15 miles north-east), Clerkhill (14 miles north-east) and Port Henry (15 miles north-east). Ellon is one of the busier places in Aberdeenshire, and we take on sealant joints for its commercial and public buildings.
Near you in Ellon
Other landmarks nearby include Ellon Castle (under half a mile south-east). Open spaces near Ellon include Cotehill Loch and Hill of Dudwick.
Quoting for work in Ellon
These are the things that shape the price:
- Travel to remote or island sites
- The total length or number of joints
- Whether old sealant has to be cut out first
- The site’s rules and procedures
There’s no price list, because the scope varies so much from one building to the next. Call for a quote.
Sending details for a quote
However big the job, these details speed things up:
- Photos of the joints, close up and from further back
- The site address and postcode
- Your programme or deadline
- Asbestos survey details if the building is older
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or email a schedule or drawings.