Commercial sealant contractors in Craigton, Angus
Sealant work for offices, shops, hotels and other commercial buildings across Craigton, by CSCS-carded applicators. CHAS accredited and fully insured.
- Leaks that seem to come through a sealant line
- Untidy joints in a reception, shop floor or lobby
- Mouldy silicone around WCs, urinals and vanity tops
Commercial sealant contractors in Craigton
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Commercial mastic work in Craigton
Mastic Doctor has been sealing joints for businesses and contractors since 2005, and the paperwork side is in order: CHAS accredited, Constructionline member, five million pounds of public liability insurance and CSCS-carded applicators. If your site needs RAMS, an insurance certificate or CSCS details, say so and we’ll confirm with the quote. If you have smeared sealant across finishes from a rushed job and greasy, split joints in a kitchen or tea point, we can put it right, whatever the surface. Looking for mastic applicators who cover Craigton? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Quotes for commercial sealant in Craigton can come from photos and a joint schedule, or from a walk-round, and the scope is set out in writing.
Scottish weather decides a lot about outside work in a place like Craigton: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Indoor work isn’t held up by rain.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Location
- Craigton (DD5)
- Region
- Angus
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Working on commercial sites near Craigton
The east of Scotland, where Craigton is, gets less rain than the west. Frost and condensation on winter mornings can still hold up external sealing. We plan external frontages and frames around that
Premises within reach of Barry Links station (to the south-east of Craigton) often have busy frontages where joints are seen by everyone passing. Whatever the building in Craigton, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material.
Craigton is about 5 miles north-east of Broughty Ferry, in Angus. Across the DD5 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Across Angus, 65 places are covered, including Craigton. There’s a separate page for Dundee, roughly 8 miles from Craigton.
We cover the DD5 postcode districts for sealant joints. Just outside Craigton, we also work in Monikie (1 mile north-west), Newbigging (1 mile south-west), Kingennie (2 miles south-west), Drumsturdy (2 miles south-west) and Wellbank (3 miles west). Further afield, our area takes in Arbroath (8 miles east), Forfar (8 miles north-west), Monifieth (4 miles south), Carnoustie (4 miles south-east), Kirriemuir (13 miles north-west) and Brechin (15 miles north).
What’s near Craigton
For rail, the closest station is Barry Links station, about 3.4 miles south-east of the centre. Other landmarks nearby include Panmure Castle (2.1 miles east) and Ashludie Hospital (3.3 miles south).
After the work
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Have extract fans checked so wet areas dry out
- Log reseals in the O&M or maintenance records
- Make sure contractors see the asbestos survey before cutting out old mastic
- Put external and wet-area joints on a regular inspection round
Keep an eye out for other trades after we’ve gone. Shop refits, new services and replaced fittings often break the seal around them and the joint gets left open. If that happens, call the office on 01277 525 020 or use the quote form and we’ll price putting it right.
Tenants and staff spot black or split sealant quickly. Replacing it on a planned cycle keeps complaints down.
Site staff or a sealant specialist?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes a few hours for one area, or a planned series of visits across a bigger building, and we clear our waste as we work. Jobs near Craigton are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- You send photographs, drawings or a list of the joints and areas involved, and a site visit is booked where it helps.
- Next comes a diagnosis and a fixed quote.
- Before anything is cut out, we agree access, timings and sequence.
- Failed sealant is cut out and each joint cleaned back to sound, dry faces.
- The depth is set, primer is used where the maker calls for it, and the fresh bead is applied and tooled.
- Each area is inspected, signed off and backed by our 12-month guarantee.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Send any specification or drawings in advance
- Point out any areas we must not close
Get a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or email us to discuss it first.
Related advice
Why deal with it now?
A failed seal around a window, worktop or panel doesn’t mean the element itself has to go. In many cases the element is fine and only the seal around it has given up. Resealing typically costs far less than renewal. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Craigton before they leak.
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why us?
- CHAS accredited
- Colours confirmed for the specified product
- A Constructionline member, so easy to vet
- Coloured sealants to suit the setting, where available
Take a look at our cost guide and our accreditations and insurance.
Questions we’re asked in Craigton
Do you offer colour-matched sealant for buildings in Craigton?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Available colours for the product are confirmed with the quote.
Which documents can you supply for work in Craigton?
We’ll confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We’re CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Is your work guaranteed?
It’s backed by our 12-month guarantee. Should a joint we sealed give trouble during those 12 months, let us know and we’ll look at it.
Do you check for asbestos before removing sealant?
We check the asbestos register or survey before any old sealant is disturbed. The duty to manage asbestos sits with the dutyholder, and we don’t remove asbestos-containing materials.
How long does a job like this take?
That varies with the scale of the job, but the work typically takes anything from part of a day on a short run of joints to several weeks on a large phased package. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Will the building have to shut during the work?
That comes down to planning: we agree access windows, phase the work and keep enough facilities open. Tell us what has to stay open and we’ll plan the job around it.
Also near Craigton
Other services in Craigton
Honest limits
Honesty saves time and money. Fresh joints won’t solve:
- Structural cracks or movement the joints weren’t designed for
- Water from a services leak rather than a joint
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
If you’re not sure, just phone 01277 525 020 or send details through our quote form and we will give you a straight answer before you book.
Joints and surfaces we work on
- External facade joints
- Movement joints in walls and floors
- Kitchen worktops and splashbacks
- Washrooms and tea points
- Floor and threshold joints
- Window and door perimeters
Different surfaces, different methods
Washrooms and toilets
Around WCs, urinals, vanity tops, IPS panels and cubicles, sealant is wet most of the day. We cut out mouldy or split beads and reseal in anti-mould sanitary silicone, phasing the rooms so not every toilet is closed at once.
Facade and cladding joints
Panel joints on cladding and rendered facades open and close with the temperature. They need a sealant with the right movement capability, laid at the right depth. Access, such as scaffold already up, is agreed before the price is fixed.