The Mastic Doctor team standing beside their branded vans outside an office building
Surrey · England

Sealant applicators in Burntcommon

Commercial sealant contractors in Burntcommon, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.

  • Black mould through washroom sealant that won’t clean off
  • Hardened, chalky sealant on south-facing or exposed elevations
  • Damp patches where an external joint has failed
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
Covering the South East & Scotland
CHAS accredited
£5m PL insurance

Commercial sealant contractors across Burntcommon

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Do you need commercial sealant contractors in Burntcommon?

No sealant joint is permanent. How long one lasts depends on the movement it takes, its exposure to sun and weather, the cleaning regime, the traffic and the product itself. In commercial buildings those factors tend to act together, so periodic inspection matters more than any date on a schedule.

These are often picked up first by site or facilities staff:

  • Shrunken sealant along kitchen worktops and splashbacks
  • Water staining near frames, panels or ceilings
  • Untidy joints in a reception, shop floor or lobby
  • A top-up bead over failed sealant, now lifting

For premises near Clandon station, 1.5 miles south of Burntcommon, footfall is part of the plan: work is phased so shops and offices keep trading.

What your quote should include

  • How the joint faces will be prepared and primed
  • Is depth set with backing rod, or bond-breaker tape in shallow joints?
  • Whether their applicators hold CSCS cards
  • How the existing material will be dealt with

Questions to ask before you appoint anyone

How we handle commercial sealant contractors in Burntcommon

Most commercial buildings carry hundreds of metres of sealant that nobody thinks about until it fails, and in an occupied building failure typically announces itself as a stained ceiling or an unhappy tenant. We’re commercial sealant applicators for FMs, managing agents, landlords and contractors with sites in Burntcommon. Our job is to diagnose the failure, remove the old bead and seal again using a product chosen for the movement and exposure. If you’re dealing with damp patches where an external joint has failed and shrunken sealant along kitchen worktops and splashbacks, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Burntcommon, preparation and product choice get the time they need.

Multi-site clients with buildings in and around Burntcommon can put several sites on one programme, with one quote format and one point of contact.

Work in smaller places such as Burntcommon tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.

Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.

Place
Burntcommon (GU23)
Region
Surrey
Guarantee
12 months on our workmanship
Quote
Fixed quote, scope in writing
Call
01277 525 020
Page updated
3 November 2026
Mastic Doctor team members lined up next to their branded vans outside an office building

Surface by surface

Commercial kitchens and tea points

In kitchens, sealant lines at worktops, sinks and wall panels take heat, grease and daily cleaning. Proper degreasing comes before any new sealant, and a hygienic or food-safe sealant is used where food contact is possible.

Window and door perimeters

The perimeter joint between a frame and the structure keeps rain out of the reveal. We remove the old seal, prepare the faces, fit backing where needed and seal again with a product chosen for both the frame and the wall.

How a job runs

Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Rural sites near Burntcommon may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.

  1. First, details reach us through the quote form or a site visit.
  2. We diagnose the cause of failure and price a fixed scope.
  3. Work is phased around your occupiers where areas need to stay in use.
  4. Every failed bead is removed rather than covered.
  5. A suitable product for each joint goes in at the right depth and is tooled.
  6. We check the work with you, and the 12-month guarantee starts.

Preparing the site

  • Agree which areas must stay open
  • Tell staff and tenants when we’ll be in
  • Arrange parking or a loading space

Get a fixed quote

If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.

Get a price

Read more

When it isn’t the sealant

A few problems need another trade or a different fix, and we point that out rather than sealing over them:

  • Structural cracks or movement the joints weren’t designed for
  • Leaks from pipework, wastes or valves (that’s plumbing)
  • A failed roof covering or waterproofing membrane

If you are not sure, just call 01277 525 020 or send details through our quote form and we will give you a straight answer.

Where we work in Burntcommon

  • External facade joints
  • Movement joints in walls and floors
  • Window and door perimeters
  • Floor and threshold joints
  • Kitchen worktops and splashbacks
  • Washrooms and tea points

For managing agents and facilities managers

Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Burntcommon can form part of a wider programme across Surrey.

FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.

Questions we’re asked in Burntcommon

Is Burntcommon too far out for you?

No. Places such as Burntcommon are covered as much as the big towns. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.

Can you match sealant colours for premises in Burntcommon?

Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. The quote lists the colours the product is made in.

What about asbestos in old mastic?

It’s possible in older buildings, especially those built before 2000. Before cutting anything out, we ask for the asbestos register or survey, and anything suspect is left until it has been tested.

How soon can the area be used again?

We’ll confirm how long the chosen product needs to cure.

What site paperwork can you provide?

Let us know your requirements when you ask for a price, and the paperwork is confirmed with the quote. From you, we will need the asbestos information for older buildings and any site rules.

Can you take on work for an FM or managing agent?

Yes, and through main contractors too. You send the details, we return a fixed quote, and the job is done and signed off.

Do your applicators hold CSCS cards?

Yes. We use CSCS-carded applicators, as many construction sites ask for.

When to bring in a specialist

For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

Sealant on show in Burntcommon’s commercial buildings

The South East is one of the drier parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. Burntcommon is about 23 miles from central London. Business parks and retail centres are common around the capital’s motorway corridors. Occupiers with several premises in the region tend to prefer one contractor and one point of contact.

For tenants and agents on sites such as Merrow Business Park (2.1 miles south-west of Burntcommon), office fit-outs, reception joints and window perimeters are the usual sealant work.

Burntcommon is about 3 miles south-east of Woking, in Surrey. Any commercial site in Burntcommon is covered. Burntcommon is one of 379 places in Surrey on our list. Our London page has more on work in that area (23 miles or so).

Business premises anywhere in GU23 are within our area. We cover commercial and managed buildings on Linden Way, Beech Drive and The Copse. Close to Burntcommon, our area also takes in Send Marsh (1 mile north), Send (1 mile west), West Clandon (1 mile south), Sutton Green (2 miles west) and Burpham (2 miles south-west). Bigger towns within reach include Guildford (4 miles south-west), Woking (3 miles north-west), Camberley (10 miles west), Epsom (11 miles east), Redhill (15 miles east) and Farnham (13 miles south-west).

Local landmarks in Burntcommon

Locally, jobs take us to sites close to Ripley Court School, The Jovial Sailor pub and St John the Baptist Catholic Comprehensive School, among other places. Burntcommon’s nearest station is Clandon station, about 1.5 miles south of the centre. A little further out are Guildford Castle (4.4 miles south-west) and Send and Ripley History Society Museum (1.2 miles north-east). The countryside around Burntcommon includes St Martha's Hill and Boldermere Lake.

Map of Burntcommon © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.