Sealant applicators in Burley
Looking for commercial sealant contractors in Burley? It’s simple: send details, get a quote, we seal, guaranteed.
- Greasy, split joints in a kitchen or tea point
- Frame mastic that has hardened and come away from the wall
- External beads that have gone brittle and cracked
Commercial sealant contractors for businesses in Burley
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When something else is needed
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- A failed roof covering or waterproofing membrane
- Cracking that needs a structural engineer to look at it
- Water from a services leak rather than a joint
If you’re not sure, just give us a call on 01277 525 020 or use the quote form and we’ll give you a straight answer.
Joints and surfaces we work on
- External facade joints
- Window and door perimeters
- Floor and threshold joints
- Movement joints in walls and floors
- Kitchen worktops and splashbacks
- Washrooms and tea points
Commercial sealant contractors for commercial buildings in Burley
Most of the buildings we seal stay open while we’re there. Work is scheduled around the site hours and access windows you give us. That applies whether the building is an office, a shop, a hotel, a college or a care home. We work on kitchen worktops and splashbacks, movement joints in walls and floors and floor and threshold joints, and what we are called in for most is weathered facade sealant that no longer flexes and sanitary sealant that has gone black and patchy. A specialist sealant contractor works differently from a general builder: on jobs in Burley, preparation and product choice get the time they need.
Multi-site clients with buildings in and around Burley can put several sites on one programme, with one quote format and one point of contact.
In and around smaller places such as Burley, the commercial buildings we’re asked about are often pubs, shops, village halls and barns converted to offices. Each has kitchens, washrooms and frames whose joints need renewing in time.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Burley (BH24)
- Wider area
- Hampshire
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
How a job runs
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. For work around Burley, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We start with the evidence: photographs, drawings or a look on site.
- You get a fixed quote covering removal, preparation and the new sealant.
- Sequence, access and working times are settled before the first joint is touched.
- The failed sealant comes out and the faces are prepared, with primer where required.
- Backing goes in, the new sealant is laid and tooled, and the area is left neat.
- Completed areas are signed off with you under our 12-month guarantee.
Getting the site ready
- Have the specification and drawings to hand
- Move anything stored against the joints
- Tell staff and tenants when we will be in
Getting a fixed quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Read more
Towns and villages near Burley
Other services in Burley
Questions we are asked in Burley
Can the sealant on our Burley premises match the finishes?
Yes, we can usually get close to most finishes from the product’s colour range. The quote lists the colours the product is made in.
Is Burley off your patch?
No. Places such as Burley are covered as much as the big towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Is it OK to apply fresh sealant over existing beads?
Full removal is part of every quote. Sealing over traps water and lifts once the joint moves, so it isn’t something we do.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
What about asbestos in old mastic?
In buildings from before 2000 in particular, some old mastics and sealants may contain asbestos. We ask to see the asbestos register or survey before disturbing old sealant, and anything suspect is left until it has been tested.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
Work for main contractors and building owners
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
After the work
Your facilities or cleaning team can help the joints last. Share these points with them:
- Ask cleaners to use a soft cloth and mild cleaner on sealant
- Check sealant as part of routine building inspections
- Keep washroom and kitchen extraction working
- Look at the sealant around anything that has been moved or replaced
Keep an eye out for other trades after we have gone. Shop refits, new services and replaced fittings often break the seal around them and the joint gets left open. Where work has disturbed a joint, just call the office on 01277 525 020 or use the quote form for a quote.
In kitchens and washrooms, a failed joint is a cleaning problem as well as a leak risk. Cleanability is something environmental health officers pay attention to, which makes sound joints worth keeping on top of.
Surface by surface
Washrooms and toilets
Washroom joints take water, cleaning chemicals and constant use. We cut out mouldy or split beads and reseal in anti-mould sanitary silicone.
Movement joints in walls and floors
Brickwork, blockwork and floor slabs all have movement joints that need a flexible seal. When the seal fails, debris gets in and the joint stops working. The new sealant is chosen for the movement and, on floors, the traffic.
When to call us in Burley
If only one face has lost its grip, that’s an adhesion failure. Typical reasons include rushed preparation, no primer where one was needed, dust or release agents on the surface, or three-sided adhesion. We see it often where joints were sealed in a hurry.
Common reasons buildings call us in:
- Gaps behind commercial kitchen worktops and sinks
- Expansion joints with the sealant torn out
- Sanitary sealant that has gone black and patchy
- Layers of sealant, all of them failing
Premises within reach of Sway station, 5 miles south-east of Burley, often have busy frontages where joints are seen by everyone passing.
Comparing quotes
- Their pre-qualification and accreditations
- How long is the guarantee, and what does it include?
- Their plan for phasing and protecting the area
- Whether old or failed sealant will be cut out, not overlaid
What Burley’s businesses ask us to seal
Several hotels sit less than 2 miles from Burley. A hotel refurbishment is full of joints that guests will see, and a matched colour keeps them discreet, with rooms done in turn while the rest stay let. The South East is one of the drier parts of the UK. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.
Refits at hotels like Burley Manor Hotel, less than half a mile to the north of Burley, bring joints at vanity tops, bars and reception desks that guests see every day.
Burley is in Hampshire. We cover commercial sites throughout Burley, whether it’s a single job or part of a planned programme. We work across 723 places in Hampshire, large and small. For work in that direction, see our Southampton page, about 15 miles away.
We take on sealant joints across the BH24 postcode area, whatever the building. Among the streets we cover are The Mall, The Cross and Doveys Close. Nearby places we also cover include Burley Street (1 mile north-west), Bagnum (2 miles west), Foulford (2 miles north-west), Crow (3 miles west) and Forest Corner (3 miles north-west). Nearby towns on our patch include Totton (11 miles north-east), Lymington (8 miles south-east), Romsey (15 miles north-east), Hythe (13 miles east), New Milton (5 miles south) and Ringwood (4 miles west).
Local landmarks in Burley
We work on buildings around The Burley Inn, among other places. For rail, the closest station is Sway station, about 5 miles south-east. Green spaces nearby include Blashford Lakes and Linbrook Lake.