Coloured Sealant in Upper Hardres
Work needed on a colour-matched joint in Upper Hardres? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Poorly tooled joints on visible finishes
- Discoloured joints on a visible elevation
- Coloured joints that have cracked with movement
Coloured sealant across Upper Hardres
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Upper Hardres, done properly
Where finishes matter, a white or grey bead in the wrong place stands out. Our coloured sealant work blends joints into the surrounding materials, from powder-coated frames to stone and brick, on commercial projects around Upper Hardres. The right product for the joint always comes first, then the colour. Most enquiries involve coloured joints that have cracked with movement and standard-colour sealant spoiling a high-end finish, across powder-coated and anodised frames, shop-fit joinery and counters and hotel bathrooms and public areas. A specialist sealant contractor works differently from a general builder: on jobs in Upper Hardres, preparation and product choice get the time they need.
Commercial sealant work around smaller places like Upper Hardres tends to mean pubs and restaurants, halls, farm shops and offices in converted farm buildings. Each has kitchens, washrooms and frames whose joints need renewing in time.
Every job we finish is backed by a 12-month workmanship guarantee. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Upper Hardres (CT4)
- Region
- Kent
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Why it’s worth doing now in Upper Hardres
Across a chain of shops or hotels, consistency matters. Fixing the colour reference at the start keeps every site the same across the programme. Older rural buildings around Upper Hardres move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
There’s no price list, since every building and every scope is different. Call for a quote.
Why us?
- Old sealant cut out, never sealed over
- Colour options checked against the specified product
- Commercial sealant work since 2005
- Specification-led, product-correct work
See how commercial sealant jobs are priced and our accreditations and insurance.
Nearby places to Upper Hardres
More services for Upper Hardres
Surface by surface
Paintable sealants
Some joints are better sealed with a paintable product and decorated. It depends on movement and the specification, as paint can crack on a moving joint.
Brick and masonry
Movement joints in brickwork are long and visible. The right colour keeps them discreet while the product still suits the movement.
Upper Hardres: questions and answers
Can you match sealant colours for premises in Upper Hardres?
Yes, we can normally get close to most finishes from the product’s colour range. Available colours for the product are confirmed with the quote.
Is Upper Hardres too far out for you?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Which sealant will you use?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Does weather matter for sealant work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Can you work while the building is occupied?
Yes, with some planning. Tell us your site hours and access windows and we will plan around them.
Shops, offices and hotels in and around Upper Hardres
Rainfall across the South East, Upper Hardres included, is lower than in many parts of the UK. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it. At about 54 miles from central London, Upper Hardres is within reach of the capital. The commuter belt holds a great many offices, retail parks and business parks. Occupiers with several premises in the region tend to prefer one contractor and one point of contact.
For any commercial premises in Upper Hardres, a lasting joint depends on full removal of the old sealant and clean, dry faces. Premises within reach of Bekesbourne station (to the north-east of Upper Hardres) often have busy frontages where joints are seen by everyone passing.
Upper Hardres is about 4 miles south of Canterbury, in Kent. Anywhere in CT4, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Our Kent coverage takes in 931 places, from busy centres to rural villages. There’s a separate page for London, about 54 miles away.
Anyone looking for coloured sealant in CT4 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Among the streets we cover are Broxhall Road and Hardres Court Road, and sites on any of them can send details for a fixed quote. Close to Upper Hardres, our area also takes in Lynsore Bottom (1 mile south-east), Pett Bottom (1 mile north-east), Lower Hardres (1 mile north), Petham (2 miles west) and Street End (2 miles north). A short drive away, we cover Ashford (11 miles south-west), Canterbury (4 miles north), Dover (11 miles south-east), Folkestone (10 miles south), Whitstable (10 miles north) and Deal (13 miles east).
Around Upper Hardres
Locally, jobs take us to sites close to The Duck pub and the streets around them. The closest station to Upper Hardres is Bekesbourne station, roughly 3.9 miles north-east of the centre. Well-known places in the area include Canterbury Castle (4.1 miles north) and Kent and Canterbury Hospital (3.5 miles north).
How a job runs
We follow your site rules from the start: signing in, inductions and any permit to work. Once we’re cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Jobs in and around smaller places like Upper Hardres are usually planned as a single visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- We start with photographs, drawings or a visit to see the finishes.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
Before we start on site
- Send your site hours and access windows
- Warn occupants and staff about the work
- Send asbestos survey details if the building is pre-2000
Get a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, phone 01277 525 020 or email the details over.
Related advice
After the work
To get the most from the new sealant:
- Protect fresh coloured sealant from dust and handling
- Use one colour standard across multi-site work
- Ask contractors to check the colour before resealing
- Check a trial length in real light
Include coloured sealant in planned building checks. Watch for cracks, peeling or discolouration.
Ask for a trial bead on high-profile areas. Seeing the cured colour in place avoids surprises.
Work for main contractors and building owners
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
General trades versus a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.