Coloured Sealant contractors in Upper Burgate
Coloured and colour-matched sealant for visible joints throughout Upper Burgate and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Failed coloured sealant that has split or peeled
- Standard-colour sealant spoiling a high-end finish
- Old sealant that has yellowed, darkened or faded
Coloured sealant in Upper Burgate
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Upper Burgate, done properly
A colour-matched bead still has to work as a seal. Each joint is cleaned, backed to depth and tooled firmly onto both faces. Clean masking and steady tooling give the sharp lines colour work needs. If you’re dealing with previous reseals that don’t match the original and sealant that no longer suits recoated frames, we can help, whatever the surface. Facilities teams, main contractors and managing agents in Upper Burgate tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Rural business units near smaller places such as Upper Burgate are frequently converted agricultural buildings. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently, and a sealant colour that suits the building’s character is often part of the brief.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Upper Burgate (SP6)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Shops, offices and hotels in and around Upper Burgate
At least three named trading, business or retail sites lie within about 3 miles of Upper Burgate. Each new occupier on a park like these tends to refit, from reception to staff kitchen. Upper Burgate is in the South East, one of the UK’s drier regions. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it.
Trade counters and showrooms on estates such as Arch Farm Industrial Estate (0.9 miles south-west of Upper Burgate) need neat joints where customers see them. A hotel such as Greyhound Hotel, 1.3 miles south of Upper Burgate, shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Upper Burgate is in Hampshire. Our applicators travel to Upper Burgate for work on colour-matched joints. Upper Burgate is one of 723 places we cover in Hampshire. We also cover Southampton, around 17 miles from Upper Burgate.
Postcode districts covered here: SP6 for colour-matched joints. Among the streets we cover are Salisbury Road and Fryern Court Road. If your building is just outside Upper Burgate, we cover Lower Burgate (1 mile south), Breamore (1 mile north), Tinkers Cross (1 mile south-west), Fordingbridge (1 mile south-west) and Upper Street (1 mile north). A short drive away, we cover Totton (12 miles east), Romsey (13 miles east), New Milton (14 miles south), Ringwood (7 miles south), Barton on Sea (15 miles south) and Marchwood (15 miles east).
Around Upper Burgate
Locally, jobs take us to sites close to Bat and Ball pub and Fordingbridge Infant School, among other places. Nearby you will also find Fordingbridge Museum (1.3 miles south) and Godshill Castle Hill (0.8 miles east).
Building owners, agents and FMs in Upper Burgate
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Towns and villages near Upper Burgate
What else we do in Upper Burgate
What we are called out for in Upper Burgate
Mould and staining discolour coloured joints in some areas. Mould that has rooted into a bead rarely cleans out, so the joint is replaced.
Site and facilities staff are often the first to spot these:
- Stained or mouldy coloured joints in washrooms
- A bead that fights the cladding or frame colour
- Untidy coloured beads with ragged edges
- Hotel refurbishments with a set colour scheme
Occupiers with premises at both Arch Farm Industrial Estate and Fordingbridge Business Park could have the sealant at each handled under one quote.
Comparing quotes
- The terms of the workmanship guarantee
- Their pre-qualification and accreditations
- Whether old or failed sealant will be cut out, not overlaid
- Will RAMS and insurance details be available?
Cost factors for colour-matched joints
Your fixed quote is built from the real scope. It allows for:
- The total length or number of joints
- Whether old sealant has to be cut out first
- How accessible the joints are
- Whether the work must be split into stages
A quote for colour-matched joints depends on how many there are, their condition and the access. Call for a quote.
Sending details for a quote
A few photos plus some basic facts will normally do. Please tell us:
- The site address and postcode
- Photos of the joints, close up and from further back
- Access details, including height
- Whether an asbestos survey exists
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, call the office on 01277 525 020 or send photos by email.
What sealant work can’t fix
Being straight saves everyone time. Fresh joints won’t solve:
- Stopping sealant from ever changing colour outdoors
- Exact bespoke colour matches beyond the product’s range
- Paintable products in joints they aren’t suited to
If in doubt, ring 01277 525 020 or email drawings and photos and we’ll say what we think.
Surfaces we seal
- Shop-fit joinery and counters
- Office fit-out finishes
- Cladding panels
- Natural stone and brick
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
Diagnose, treat, sign off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before we move to the next. Rural sites near Upper Burgate may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
Getting the site ready
- Tell us which areas need to stay in use
- Arrange parking or a loading space
- Confirm the product named in the specification
Quotes
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or send photos by email.
Related advice
Questions we’re asked in Upper Burgate
Is Upper Burgate too small for you to travel to?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can the sealant on our Upper Burgate premises match the finishes?
Yes, we can typically get close to most finishes from the product’s colour range. Send colour references or photos and we will confirm what’s available for the product.
How much does the work cost?
We don’t publish prices, because every site is different. Send photographs or drawings and we will price it at a fixed figure.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Who decides which product is used?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Can the building stay open while you work?
Yes, with some planning. Tell us your site hours and access windows and we’ll plan around them.