The Mastic Doctor team standing beside their branded vans outside an office building
Medway · England

St Mary Hoo coloured sealant

Coloured and colour-matched sealant for visible joints in St Mary Hoo and across Medway. CHAS accredited and fully insured, with a 12-month guarantee.

  • Marked sealant in hotel bathrooms
  • A run of joints in mismatched shades
  • Smeared sealant on stone or joinery
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
Constructionline member
£5m public liability

Coloured sealant in St Mary Hoo

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

About our coloured sealant in St Mary Hoo

A colour-matched bead still has to work as a seal. Faces are prepared, depth is fixed with rod and the bead is tooled onto two sides only. Clean masking and steady tooling give the sharp lines colour work needs. If you have discoloured joints on a visible elevation and hotel refurbishments with a set colour scheme, we can help, on cladding panels, office fit-out finishes and shop-fit joinery and counters alike. Searching for sealant specialists in St Mary Hoo? Mastic Doctor has worked for contractors, FMs and building owners since 2005.

Work in smaller places such as St Mary Hoo tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.

Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.

Place
St Mary Hoo (ME3)
Wider area
Medway
Guarantee
A 12-month guarantee
Quotes
Quoted before any work starts
Phone
01277 525 020
Page updated
3 November 2026
The Mastic Doctor team beside their liveried vans in front of an office building

When it isn’t the sealant

Before quoting, we check that sealant is the right answer. It isn’t the answer for:

  • Cleaning or repairing the surrounding finishes
  • A guaranteed perfect match to every finish
  • Overpainting a joint that needs a non-paintable product

If you are not sure, just call 01277 525 020 or send details through our quote form and we will give you a straight answer.

Joints and surfaces we work on

  • Cladding panels
  • Natural stone and brick
  • Shop-fit joinery and counters
  • Powder-coated and anodised frames
  • Office fit-out finishes
  • Hotel bathrooms and public areas

For managing agents and facilities managers

Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.

CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.

Do you need coloured sealant in St Mary Hoo?

When frames are recoated or a space is rebranded, the old joints may no longer suit. Refurbishments and rebrands often bring a new colour scheme that the sealant has to follow.

Typical triggers for a call:

  • Untidy coloured beads with ragged edges
  • A run of joints in mismatched shades
  • Old colour-matched joints lifting at the edges
  • Standard-colour sealant spoiling a high-end finish

Where a joint is on show in St Mary Hoo, we’ll check which shades the product offers before work starts.

Before you book anyone

  • Who will actually carry out the work
  • Their pre-qualification and accreditations
  • How the existing material will be dealt with
  • How they’ll work around occupants

Our contractor checklist

Questions we are asked in St Mary Hoo

Our building in St Mary Hoo is near the coast: does that change the sealant?

It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.

Can you match sealant colours for premises in St Mary Hoo?

Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Available colours for the product are confirmed with the quote.

Do you hold CHAS accreditation?

Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.

Are your applicators CSCS-carded?

Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.

Can you work to our specification?

Yes. We follow the specification, along with the manufacturer’s installation guidance.

How many days will you need on site?

It depends on the scope, though a typical visit usually takes a few hours or a phased programme, depending on joint lengths and how many colours are involved. Larger or phased jobs take longer, and we will give you a timescale with the quote.

When is resealing likely to be due?

It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.

Why it’s worth doing now in St Mary Hoo

A mismatched or discoloured bead is a small detail that buyers, guests and clients notice, particularly on high-end finishes. Putting it right costs little compared with the finishes around it. One visit to deal with every failing joint makes more sense than several trips to a place like St Mary Hoo. Photos of every joint help us quote for the whole job.

Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.

What you get with us

  • Work to your specification and the manufacturer’s guidance
  • CSCS-carded applicators
  • Failed material removed, not covered up
  • Matching to RAL references, product permitting

See what affects the cost and our accreditations.

Keeping the joints sound

To get the most from the new sealant:

  • Avoid piecemeal repairs on coloured joints
  • Use one colour standard across multi-site work
  • Look at the cured colour before the full run
  • Keep the area clear while the sealant cures

Colours can soften with light and weathering. Some fading is part of normal ageing outdoors, and a reseal brings it back.

Standardise the sealant colour on multi-site work. Consistency makes future work simpler.

Our process

We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. If others near St Mary Hoo need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.

  1. We confirm the product the joint needs before talking about colour.
  2. We compare your RAL reference or sample with the colours made for that sealant.
  3. Where colour is critical, a sample bead can be agreed in a discreet spot.
  4. We remove the existing bead, clean the faces and set the depth.
  5. The coloured sealant is applied and tooled with clean, masked edges.

What we need from you

  • Tell us your opening times and when work is allowed
  • Send any specification or drawings in advance
  • Agree which areas must stay open

Quotes

Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or email the details over.

Ask for a quote

Advice

Commercial premises in St Mary Hoo

St Mary Hoo lies within about 2 miles of the sea. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. A matched colour is only half the brief on an exposed frontage. At about 30 miles from central London, St Mary Hoo is within reach of the capital. This part of the South East is dense with business parks and out-of-town offices. Firms with branches across the South East can use one contractor for every site.

Whatever the building in St Mary Hoo, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material.

St Mary Hoo is about 4 miles south of Canvey Island, in Medway. Anywhere in ME3, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. St Mary Hoo is one of 54 places in Medway on our list. London is covered too, around 30 miles from St Mary Hoo.

Postcode districts covered here: ME3. Nearby places we also cover include Fenn Street (1 mile south-west), High Halstow (1 mile south-west), Sharnal Street (2 miles south-west), Tunbridge Hill (2 miles south) and Kingsnorth (2 miles south) for colour-matched joints. Nearby towns on our patch include Gillingham (6 miles south), Chatham (8 miles south), Rochester (6 miles south-west), Rainham (7 miles south), Strood (7 miles south-west) and Luton (7 miles south).

Local landmarks in St Mary Hoo

Well-known places in the area include Bay Museum (3.6 miles north) and Medway Maritime Hospital (6 miles south-west). For a walk, there’s Bishop Saltings.

Map of St Mary Hoo © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.