
Sevington coloured sealant
Coloured and colour-matched sealant for visible joints throughout Sevington and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Weathered sealant that no longer matches
- Sealant that no longer suits recoated frames
- Fit-outs with a sealant colour in the specification
Coloured sealant in Sevington
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Your questions answered
Is Ashford Retail Park, near Sevington, within your area?
Yes, sites like Ashford Retail Park are within our area, along with the rest of Sevington. Send details of the unit and the work through our quote form for a quick quote.
Do you offer colour-matched sealant for buildings in Sevington?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photos and we’ll confirm what’s available for the product.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
How long does a typical visit take?
The duration is planned around your programme and the access we are given. We will give you an estimate of time on site when we quote.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
How we handle coloured sealant in Sevington
On a finished interior or a high-quality elevation, the sealant is part of the look. Our coloured sealant work blends joints into the surrounding materials, from powder-coated frames to stone and brick, for clients in Sevington. The right product for the joint always comes first, then the colour. Most enquiries involve standard-colour sealant spoiling a high-end finish and old colour-matched joints lifting at the edges, on natural stone and brick, cladding panels and shop-fit joinery and counters. A specialist sealant contractor works differently from a general builder: on jobs in Sevington, preparation and product choice get the time they need.
Commercial sealant work around smaller places like Sevington tends to mean pubs and restaurants, halls, farm shops and offices in converted farm buildings. Kitchens, toilets and window frames in all of them need resealing sooner or later.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.

- Place
- Sevington (TN24, TN25)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Places near Sevington
More services for Sevington
Looking after the joints
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Record the product and colour reference on the building file
- Look at the cured colour before the full run
- Avoid piecemeal repairs on coloured joints
- Keep the same sealant colour across a brand
Don’t let anyone patch a coloured joint with whatever sealant is to hand. A mismatched repair stands out.
Share the colour reference with anyone working on the finishes. It stops mismatched repairs creeping in.
Surface by surface
Natural stone
Natural stone rarely has one colour, and the sealant has to work with that. A stone-safe neutral-cure product is used in the closest available colour.
Paintable sealants
Paintable sealants suit internal, low-movement joints best. We’ll tell you if a joint needs a non-paintable product.
Site staff or a sealant specialist?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What we can’t put right
Honesty saves time and money. Fresh joints won’t solve:
- A colour that never alters with age
- Finishes that change colour from one area to another
- Paintable products in joints they aren’t suited to
Not sure which it is? You can ring 01277 525 020 or email the details over and we’ll tell you honestly before you book.
Where we work in Sevington
- Shop-fit joinery and counters
- Office fit-out finishes
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
- Natural stone and brick
- Cladding panels
Sealant on show in Sevington’s commercial buildings
Sevington sits in one of the drier corners of the country, the South East. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. The 3 miles around Sevington take in at least three named trading estates, business parks or retail parks. Sites like these see regular refits, with shopfronts, offices and staff areas to seal; brand colours often come into it.
Retail sites such as Ashford Retail Park, under half a mile to the north-west of Sevington, are typical of where shop-fit joints, frontages and staff areas need neat, colour-matched sealant. Shops and cafés around stations like Ashford International station (1.8 miles north-west of Sevington) trade from early, so work is timed around them. A business with units at Ashford Retail Park and Mersham-le-Hatch Business Village needn’t use two contractors for its sealant.
Sevington is about 2 miles south-east of Ashford, in Kent. We send applicators to Sevington for colour-matched joints, handled exactly as we handle every other area. Sevington is one of 931 places in Kent on our list for colour-matched joints. Our London page has more on work in that area (50 miles or so).
Business premises anywhere in TN24 and TN25 are within our area for colour-matched joints. If your site is on Church Road, Bad Munstereifel Road and Highfield Lane or close by, we can quote for colour-matched joints. Just outside Sevington, we also work in Hinxhill Park (1 mile north-east), Mersham (1 mile south-east), Hinxhill (1 mile north-east), South Stour (2 miles south) and Ridgeway (2 miles east). A short drive away, we cover Canterbury (13 miles north-east), Folkestone (12 miles east), Faversham (13 miles north), Hythe (8 miles south-east), Davington (13 miles north) and Preston (13 miles north).
Landmarks near Sevington
In Sevington, that means premises near Ashford Green Corridors, The North School and The William Harvey Public House and the streets around them. Sevington’s nearest station is Ashford International station, roughly 1.8 miles north-west of the centre. A little further out are William Harvey Hospital (0.9 miles north) and Ashford Designer Outlet (1.5 miles west). The countryside around Sevington includes Hatch Park.
What happens if it’s left?
It’s far cheaper to approve a sample than to strip and redo a full run. A short trial bead costs very little. For buildings around smaller places like Sevington, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Why choose Mastic Doctor in Sevington
- Colours confirmed for the specified product
- Health and safety: CHAS accredited
- A range of standard colours, depending on the product
- A Constructionline member, so easy to vet
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Rural sites near Sevington may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Before we start on site
- Arrange parking or a loading space
- Move anything stored against the joints
- Send any specification or drawings in advance
Getting a fixed quote
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, phone 01277 525 020 or use the quote form.