Coloured and colour-matched sealant in Oare, Kent
Need coloured sealant in Oare? It’s simple: send details, get a quote, we seal, guaranteed.
- White or grey sealant that clashes with the finish
- Failed coloured sealant that has split or peeled
- Stained or mouldy coloured joints in washrooms
Coloured sealant for Oare sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle coloured sealant in Oare
Colour-matched joints are often among the last items before handover. Adjacent finishes are masked and protected while we work, and snag any marks before we leave. A 12-month guarantee covers our workmanship. Most enquiries involve shop fits that need consistent sealant colours across sites and a run of joints in mismatched shades, across shop-fit joinery and counters, powder-coated and anodised frames and cladding panels. Most enquiries from Oare start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In and around smaller places such as Oare, the commercial buildings we’re asked about are often pubs, shops, village halls and barns converted to offices. Kitchens, toilets and window frames in all of them need resealing sooner or later.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Oare (ME13)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Looking after the joints
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Ask contractors to check the colour before resealing
- Standardise colours across a portfolio
- Look at the cured colour before the full run
- Avoid abrasive pads on coloured sealant
Note the sealant type and colour on the building file. It makes matching later repairs much easier, with no guesswork.
Standardise the sealant colour on multi-site work. It keeps repairs and new sites consistent and easier to manage.
Leave it or put it right?
People notice sealant lines more than you might expect, particularly on high-end finishes. Resealing in a suitable colour is a modest cost against the finishes it sits beside, and the difference is obvious. For buildings around smaller places like Oare, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
What a job costs comes down to how many linear metres there are, what has to come out first and the access. Call for a quote once you have the details.
Why appoint us
- RAL and finish matching where the product range allows
- 12-month guarantee on workmanship
- Fully insured, including public liability cover
- A fixed quote before work starts
Take a look at what affects the cost or our accreditations.
Frontages, fit-outs and joints in Oare
Oare is within about 2 miles of the coast. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. Where a frontage needs a particular colour, the product still has to suit that exposure. Oare is in the South East, one of the UK’s drier regions. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it.
A hotel such as The Ship Hotel (1.1 miles south-east of Oare) shows how much sealant a hospitality building has on show, from bathroom joints to the bar. For premises near Faversham station (1.4 miles south-east of Oare), footfall is part of the plan: work is phased so shops and offices keep trading.
Oare is about 1 mile north of Faversham, in Kent. We cover commercial sites throughout Oare, for single jobs and planned programmes alike. We work across 931 places in Kent. There’s a separate page for London, about 44 miles away.
Commercial sites across ME13 are covered. Among the streets we cover are The Street, Church Road and Russell Place, and sites on any of them can send details for a fixed quote. If your building is just outside Oare, we cover Davington (1 mile south), The Brents (1 mile south-east), Uplees (1 mile north-west), Faversham (1 mile south) and Four Oaks (1 mile south-west). Nearby towns on our patch include Ashford (13 miles south), Canterbury (9 miles east), Sittingbourne (6 miles west), Whitstable (7 miles east), Herne Bay (11 miles east) and Minster (7 miles north-west).
Around Oare
Recent enquiries here include premises near Oare Meadow, Three Mariners Inn and Queen Elizabeth's Grammar School, among other places. Oare’s nearest station is Faversham station, about 1.4 miles south-east of the centre. Nearby you’ll also find Newnham Castle (4.5 miles south-west).
Building owners, agents and FMs in Oare
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
FAQs: Oare
Does the sea air around Oare change the choice of sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Does a hotel in Oare need to shut while its sealant is renewed?
Almost never. The work is phased so most rooms stay available. The plan is built around your bookings.
Do you match sealant to RAL colours?
Yes. Give us the RAL reference and we will check it against the product’s range. We’ll tell you which colour is closest at quote stage.
Can you match any colour exactly?
No, not always. We choose the nearest standard colour and a sample can be approved before the full run.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Should maintenance staff do it?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
How the quote is worked out
Quotes vary with the job. It mainly depends on:
- Travel to remote or island sites
- Which sealant the job calls for
- Working within restricted access windows
- How accessible the joints are
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What to include in your enquiry
There’s no need for a formal survey. A few details are enough to get going:
- Your programme or deadline
- Access details, including height
- Drawings or a marked-up plan, if available
- The asbestos register, for older buildings
To get a fixed quote, give us a call on 01277 525 020 or email the details over, telling us the site location and the nature of the job. You can also send details through our quote form.
Other services in Oare
Our process
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Smaller jobs around Oare can be grouped with others nearby. You’ll have a fixed quote before work starts.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- Masking comes off and the work is checked with you.
Before we start on site
- Tell staff and tenants when we’ll be in
- Send your site hours and access windows
- Explain the parking and delivery arrangements
Get a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, call the office on 01277 525 020 or email drawings and photos.