Coloured Sealant contractors in Nonington
Coloured sealant for Nonington, from a contractor working since 2005. Fully insured and CHAS accredited.
- Stained or mouldy coloured joints in washrooms
- Old colour-matched joints lifting at the edges
- Smeared sealant on stone or joinery
Coloured sealant in Nonington
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant in Nonington
On a finished interior or a high-quality elevation, the sealant is part of the look. We install coloured and colour-matched sealant so joints sit quietly against cladding, stone, brick, frames and shop-fit finishes, on commercial projects around Nonington. Performance decides the product; the colour is chosen from that product’s range. If you have colour changes after a rebrand or refit and weathered sealant that no longer matches, we can help. A single leaking joint is often how a building in Nonington first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In and around smaller places such as Nonington, the commercial buildings we’re asked about are often pubs, shops, village halls and barns converted to offices. Each has kitchens, washrooms and frames whose joints need renewing in time.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant.
- Location
- Nonington (CT15)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Should maintenance staff do it?
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Frontages, fit-outs and joints in Nonington
Nonington is in the South East, one of the UK’s drier regions. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it. Less than 3 miles from Nonington there are at least three named estates and business parks. Each new occupier on a park like these tends to refit, from reception to staff kitchen.
For premises near Aylesham station, 0.8 miles to the west of Nonington, footfall is part of the plan: work is phased so shops and offices keep trading. A unit on an estate like Aylesham Industrial Estate, 1.5 miles west of Nonington, usually has an office front, a trade counter and staff facilities with joints of their own.
Nonington is about 7 miles north-west of Dover, in Kent. We cover commercial sites throughout Nonington. Our Kent coverage takes in 931 places, large and small. There’s a separate page for London, roughly 60 miles from Nonington.
Business premises anywhere in CT15 are within our area. Among the streets we cover are Vicarage Lane, St Mary's Close and Park View Rise. If your building is just outside Nonington, we cover Snowdown (1 mile south-west), Frogham (1 mile south), Ratling (1 mile north-west), Chillenden (1 mile north-east) and Barfrestone (1 mile south-east). Nearby towns on our patch include Canterbury (7 miles north-west), Margate (13 miles north-east), Dover (7 miles south-east), Folkestone (10 miles south), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Around Nonington
The nearest railway station is Aylesham station, roughly 0.8 miles west.
Common problems we fix in Nonington
A change of finish can leave existing sealant mismatched. New cladding colours, repainted frames or a refreshed shop fit all prompt colour changes, and the joints need to match.
It’s worth sending us details if you spot any of the following:
- Sealant that no longer suits recoated frames
- Dirty, discoloured joints in public areas
- Patch repairs in several different colours
- Standard-colour sealant spoiling a high-end finish
Sites a few miles apart, such as Aylesham Industrial Estate and CT3 Business Park, can share one programme and one point of contact.
What to look for in a quote
- Their public liability cover
- Their pre-qualification and accreditations
- How the existing material will be dealt with
- How joint depth will be controlled
How a job runs
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Rural sites near Nonington may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We confirm the product the joint needs before talking about colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We take out the existing bead, clean the joints and fit backing.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
Before we start on site
- Tell staff and tenants when we’ll be in
- Have the specification and drawings to hand
- Clear stock, furniture or equipment away from the joints
Request a quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or ring 01277 525 020 or email the details over if you’d rather talk the job through.
Advice
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be one of these:
- Restoring stained stone or masonry next to old sealant
- A guaranteed perfect match to every finish
- Paintable products in joints they aren’t suited to
If you’re not sure, just phone 01277 525 020 or email the details over and we’ll give you a straight answer.
What we seal
- Natural stone and brick
- Powder-coated and anodised frames
- Cladding panels
- Hotel bathrooms and public areas
- Office fit-out finishes
- Shop-fit joinery and counters
Towns and villages near Nonington
More services for Nonington
After the work
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Brief cleaners about newly sealed joints
- Keep harsh solvents away from visible joints
- Standardise colours across a portfolio
- Approve a sample bead on high-profile areas
Don’t let anyone patch a coloured joint with whatever sealant is to hand. Wrong-colour patches are obvious.
Make sure every contractor knows which sealant and colour are on the building file. That keeps new work in line with what’s there.
Your questions answered
Is Nonington too small for you to travel to?
No. Places such as Nonington are covered as much as the big towns. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Do you offer colour-matched sealant for buildings in Nonington?
Yes, we can normally get close to most finishes from the product’s colour range. The quote lists the colours the product is made in.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
How do I request a quote?
You can use the quote form on this site; alternatively, give us a call on 01277 525 020 or email the details over. Photos, drawings or a joint schedule help us quote quickly.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Do you take on small jobs?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
What sets the cost
We price every job individually. The things that drive the figure:
- How much existing material needs removing
- Travel to remote or island sites
- Working within restricted access windows
- Backing rod, priming and other preparation
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- The product your specification calls for
- Whether the building will be occupied during the work
- Any dates the work must fit around
- A wide shot and a close-up of the area
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. For a chat about it beforehand, ring 01277 525 020 or email a schedule or drawings.